Used Ott U 206 for sale (41,518)

Condition: used, Veneer press OTT Lhodpfevdaymox Abyen Type JU 60S Pressing area max. 225x120 cm Electric

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits Ljdpfez Ai Tpjx Abyohn SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm infeed height: 1.350 mm 400V, 50 Hz, 16A Grill opening: 2 mm Lhedpfxo Aawyie Abyjn dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Condition: used, Year of construction: 2020, Overview This lauter tank was manufactured by the company INOXDUBRA in Spain in the year 2020. This fully functional lauter is in good condition and free from defects (such as scratches, dents). With a capacity of 10,000 liters, it is ideally suited for filtering 5,000 - 8,000 liters of wort. It is currently located at the owner's factory and is being sold because they are investing in another production line. Components: Filtering bottom Cutting blades Motor, gearbox with its speed variator Automated Guillotine valve for spent grain discharge Upper door Leg extensions CE certification and tank blueprints Lhodpfx Abetq Dzpeyen

Condition: used, Year of construction: 1991, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 3,400 kg, height adjustment type: electric, OTT Omega 1100 (year of manufacture 1991) Lhodpfxjz Dpxls Abyon Dimensions and weight: Footprint / installation dimensions (L x W x H): approx. 2700 x 2100 x 2200 mm Weight: approx. 3400 kg Extraction: 3 extraction ports

Condition: used, mileage: 206,700 km, power: 205 kW (278.72 HP), first registration: 08/2005, fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 6x2, wheelbase: 5,550 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 9,080 mm, total width: 2,480 mm, Year of construction: 2005, Equipment: ABS, air conditioning, electric window regulation, = Additional Options and Accessories = Lhjdoz Rmzljpfx Abyen - 6x2 - Digital tachograph - Lift axle - Air suspension - PTO - Radio/CD player - Sun visor = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 6,374 cc Axle Configuration Tire size: 315/80 R 22.5 Front axle: Steered; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Leaf spring suspension Rear axle 1: Dual tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Tire tread depth left: 25%; Tire tread depth right: 25%; Suspension: Air suspension Weights Unladen weight: 15,040 kg Payload: 11,960 kg GVWR: 27,000 kg Condition Damage: none

Condition: used, OTT Tornado - TOP Lhedpfx Aez Ti Dusbyen Control system - via a 15-inch color touch monitor for full automation and maximum ease of operation. CM-CombiMelt gluing system – suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules. Joint processing unit for attaching chipboard. Automatic roll magazine. Automatic edge magazine. Double-head unit with automatic pivoting 0° / 3°. Flush trimming unit – for flush trimming – 12mm. Fine milling unit RADIUS – for radius milling – profile cutter R2 – R5. Automated contour milling – for rounding corners. Pull knife unit – radius. Surface pull knife unit. Lubricant spray system – PU. Cleaning set with fine wiping device. Very stable workpiece support with roller conveyors – FRONT with scissor lift. Complete tool set included. Machine is in EXCELLENT CONDITION. Machine is from a lease return. First delivery in 2012. Available from stock in Lieboch.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, working width: 2,700 mm, Kryma SK2800 automatic slotter with vacuum autofeeder, machine have been used very little and is in perfect condition and available anytime. Speed is approx. 2000pcs per hour. Machine can do up to 10m long sheets. Video can be sent upon request. Also available Kryma WR rotation die cut machine with auto feeder. Machine is not in use but can easily be seen running. * We can arrange transport within Europe, and give offer with transport included if of an interest. Lhjdstth Iaepfx Abyen

Condition: refurbished (used), Year of construction: 2018, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, feed rate X-axis: 20 m/min, actuation type: electric, total length: 6,200 mm, overall weight: 3,100 kg, Tornado+ – Fully Refurbished / AS NEW Spray devices GS, RS optional, texture finishing possible Joining, gluing, edge banding, flush trimming, radius milling, corner copying AKF, scraper blade R1/R2 with foil function on unit 1 Belt overlay / Synchro-Flex PUR gluing included in the basic equipment Workpiece dimensions: Width, minimum: 70 mm Height, minimum: 8 mm Height, maximum: 60 mm Length, minimum: 150 mm Panel thickness: Max. 60 mm Edge thickness: 0.3 – 15 mm -CM – CombiMelt gluing system Modular design for easy replacement of the pre-melting tanks. Suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules. Any type of adhesive can be processed with all working parameters (such as dispensing quantity, pre-melting and working temperatures) via individual work programs. -Individual inverters with full flexibility for individual activation of the individual processing motors via a power bus system. Special feature: Machine with speed package! 20 m/min with corner copying!! Tools and chain plates – NEW Ledpjzkk Drjfx Abyohn Sale of the machine with warranty possible. Inspection and demonstration possible at any time by appointment.

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Ledozuyh Uepfx Abyehn Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: used, mileage: 81 km, power: 375 kW (509.86 HP), first registration: 09/2026, fuel type: diesel, fuel: diesel, emission class: euro6, General information Number of doors: 2 Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Lodpfx Aoz Ntlhebyohn Weights Empty weight: 8.766 kg Carrying capacity: 18.234 kg GVW: 27.000 kg Interior Number of seats: 2 Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 09/2027 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), mileage: 535,931 km, power: 449 kW (610.47 HP), first registration: 01/2004, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 3,200 mm, fuel: diesel, brakes: retarder, color: blue, gearing type: mechanical, number of gears: 12, emission class: euro3, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2004, Equipment: air conditioning, central locking, cruise control, retarder, = Additional options and accessories = - Rear work lights - Front work lights - High beam headlights Lodpfx Aboz Eq Rleyshn - Cab - Tilting hydraulics - Power take-off (PTO) - Sun visor = Notes = FH16.610 6x2 Globe XL 2004 530,000 km YV2A8A2C24A584143 E3 Manual gearbox Retarder Hub reduction Tipping hydraulic system Full air suspension Wheelbase 320 = Further information = Front axle: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Steered; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 1: Tire size: 315/70R22.5; Double tires; Max. axle load: 11500 kg; Tire tread depth left inside: 50%; Tire tread depth left outside: 50%; Tire tread depth right inside: 50%; Tire tread depth right outside: 50%; Reduction: External planetary axles Rear axle 2: Tire size: 315/70R22.5; Double tires; Lift axle; Max. axle load: 7500 kg; Tire tread depth left inside: 30%; Tire tread depth left outside: 30%; Tire tread depth right inside: 30%; Tire tread depth right outside: 30% Number of cylinders: 6 GVWR: 27,000 kg Technical condition: good Optical condition: good

Condition: excellent (used), Catalog number: 7808 TECHNICAL DATA max. width of the processed workpiece: 1100mm max. height of the processed workpiece: 160mm 2 processing units: 1) ribbed rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above 2 metal rollers, sliding processing units cleaning brush – from below pulling belt pneumatic belt oscillation with photocells Ledpeztambefx Abyohn electric table lifting 2 feed speed types 1.1kW motor: 15kW with pneumatic brake additional pneumatic shoe working pressure: 6-8bar diameter of extraction nozzle: 2x160mm, 1x120mm overall dimensions L/W/H: 2700x2100x2200mm weight approx.: 3000kg – German production – 2 processing units – additional pneumatic shoe – unpainted – used grinder, very good condition Net price: 32900 PLN Net price: 7650 EUR, depending on an exchange rate of 4.3 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 1,100 mm, working height: 160 mm, type of input current: three-phase, input voltage: 380 V, OTT RS-O 110 Wide-Belt Calibrating and Sanding Machine Used industrial wide-belt sanding machine manufactured by OTT. The machine is equipped with two sanding units and is suitable for calibrating, pre-sanding, and fine sanding solid wood, furniture components, and panel materials. Technical specifications: Manufacturer: OTT Model: RS-O 110 Year of manufacture: 1979 Machine number: 354 Maximum working width: 1,100 mm Maximum workpiece height: 160 mm Number of sanding units: 2 Total installed power: 30 kW Power supply: 380 V Feed speeds: 2 Operating pressure: 8–10 bar Dust extraction connections: 2 × Ø 200 mm Lhedpjz Dxkdefx Abyen Approximate dimensions: 2,230 × 2,020 × 2,050 mm Approximate weight: 3,000 kg Machine configuration: Grooved rubber calibration roller Pneumatic sanding pad with metal rollers Pneumatic sanding-belt oscillation with photocell control Electrically adjustable working table Integrated cleaning brush Industrial heavy-duty construction The machine is offered in used condition. Its actual condition, equipment, control panel, and internal components are shown in the photographs. Inspection is possible by prior appointment. Location: Gātciems, Latvia Loading assistance can be provided. European transport can be arranged upon request. Price: EUR 2000 net, excluding VAT.

Condition: ready for operation (used), To suit any saddle stitcher, Price £3,000  IN STOCK Lodsir E R Uopfx Abyshn

Condition: used, Year of construction: 2001, functionality: fully functional, Used, fully functional OTT PACIFIC for sale! Machine length: 6.30 m! Lhsdpfx Aoxc Hhkobyjn

Condition: used, This listing is for Bio-Rad Trans-Blot Turbo 690BR Transfer System The unit is in full working condition and ready for immediate use The Trans-Blot Turbo is a rapid protein transfer system designed for transferring proteins from electrophoresis gels to membranes for Western blotting. It provides a compact, efficient solution for routine laboratory protein analysis Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: Lodpfxeztpubo Abyshn By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: excellent (used), Catalog number: 7549 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: metal roller, sliding unit metal roller, sliding unit with shoe metal output roller, sliding Lsdpfx Aszty Rtjbyjhn – from below: traction belt pneumatic belt oscillation electric table lifting 2 types of feed speed motor 11 kW with pneumatic brake operating pressure 6-8 bar diameter of the extraction nozzle 2x150 mm overall dimensions L/W/H 1960x1700x2000 mm weight approx. 2000 kg – manufactured in Germany – 2 units – unpainted – used sanding machine, very good condition Net price: 31900 PLN Net price: 7420 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant fluctuations)

Condition: good (used), mileage: 680,015 km, power: 485 kW (659.42 HP), first registration: 06/2009, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro4, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 10,500 kg, permissible axle load (axle 3): 10,500 kg, Equipment: AdBlue, central locking, = Additional Options and Accessories = - Rear work lights - Front work lights - Heated mirrors - Leaf spring suspension - Windshield - Cab - Automatic heating system - Power take-off (PTO) = Notes = Volvo FH16.660 Globetrotter 6x4 - PTO/Hydraulic - Hub reduction - Leather Year of manufacture: 2009-06-22 Mileage: 680015 YV2AUJ0D29A682779 PTO and hydraulics Hub reduction 3.20 wheelbase Leather interior Etc. = Further Information = General Information Year of construction: 2009 Technical Information Number of cylinders: 6 Engine displacement: 16,000 cc GVWR: 30,000 kg Transmission Transmission: I-Shift, 12 gears, Automatic Axle Configuration Front axle: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/80R22.5; Double tires; Max. axle load: 10500 kg; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Reduction: External planetary axles; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Double tires; Max. axle load: 10500 kg; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Reduction: External planetary axles; Suspension: Air suspension Ledpfoy Rx Rpox Abyehn Functional Body brand: Volvo Condition Technical condition: good Optical condition: good Further information Please contact VAEX The Truck Traders for further information.

Condition: used, axle configuration: 3 axles, first registration: 08/2026, color: other, Year of construction: 1998 Empty weight: 5.380 kg Ledpfx Abozw Eq Hjyjhn Axle 1: left 12mm right 12 mm Axle 2: left12 mm right 12 mm Axle 3: left 16 mm right 16mm We have the possibility to stack trailers!

Condition: used, mileage: 813,543 km, power: 552 kW (750.51 HP), first registration: 08/2018, fuel type: diesel, tire size: 385/65R22.5, tire condition: 60 %, axle configuration: 8x4, wheelbase: 4,300 mm, fuel: diesel, fuel tank capacity: 700 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 10,360 mm, total width: 2,550 mm, total height: 4,200 mm, Equipment: ABS, cruise control, parking heater, = Additional Options and Accessories = - Refrigerator - Radio/CD = Additional Information = General Information Year of Manufacture: 2018 Cab: Globetrotter XL Technical Information Number of Cylinders: 6 Axle Configuration Lhsdpfxoz Rkhcs Abyen Front Axle: Tire Size: 385/65R22.5; Tire Tread: 60%; Reduction: single reduction; Suspension: Parabolic Suspension Rear Axle 1: Tire Size: 315/80R22.5; Tire Tread: 40%; Reduction: single reduction; Suspension: Air Suspension Rear Axle 2: Tire Size: 315/80R22.5; Tire Tread: 30%; Reduction: single reduction; Suspension: Air Suspension Rear Axle 3: Tire Size: 385/65R22.5; Tire Tread: 50%; Reduction: single reduction; Suspension: Air Suspension Weights Unladen Weight: 16,950 kg Payload: 25,050 kg GVW: 42,000 kg Functional Body Brand: OTHER Layout Number of Sleeping Berths: 1 Condition Damage: none = Company Information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: good (used), mileage: 493,035 km, power: 309 kW (420.12 HP), first registration: 03/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: AdBlue, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, General information Year of construction: 2019 Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Lhedpfj Acynbjx Abyjn Weights Empty weight: 7.657 kg Carrying capacity: 11.343 kg GVW: 19.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Climate control - Heater - Sleeper cab - Vehicle heater - Visor = Remarks = Volvo FH 13.420 Globetrotter / Automatic / Euro-6

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total height: 1,400 mm, total length: 4,000 mm, total width: 1,200 mm, OTT ATLANTIC EDGE BANDER 2 HM SAW BLADES 140X3.2X16 Z=36 FLUSH MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS FINE MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS Lodjww H Enopfx Abyohn SCRAPING UNIT WITH 2X HM SCRAPERS, AUTOMATIC FEED EDGE CLEANING – OSCILLATING BRUSHES MACHINE LENGTH: 4.50 M

Condition: good (used), mileage: 440,871 km, power: 309 kW (420.12 HP), first registration: 04/2018, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: AdBlue, EBS, air conditioning, airbag, cruise control, electric window regulation, fog lights, fridge, parking heater, General information Year of construction: 2018 Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Weights Empty weight: 7.752 kg Carrying capacity: 11.248 kg GVW: 19.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information Lhodpfx Abs Aa A D Hjyen = Additional options and accessories = - Climate control - Heater - Radio/cassette player - Radio/Cd/Audio system - Radio/CD player - Sleeper cab - Vehicle heater - Visor = Remarks = Volvo FH 13.420 Globetrotter / Automatic / Euro-6

Condition: as good as new (ex-display), Year of construction: 2026, OTT Pacific+ with special paint finish Equipment: Riepe transmission Gluing, laminating (PUR/EVA), pressure zone, edge trimming for increased edge overhang Capping with 2 motors, flush trimming at the top/bottom, radius trimming R2, corner copying AKF fully equipped with optional multi-tool, NC radius draw blade R2/R1, surface draw blades 2-point, RS special unit with Riepe spray nozzles. Ledjz D Uwmepfx Abyohn Suitable for solid wood up to 15mm thick Feed rate from the roll: 18 m/min, including profile milling Machine weight approx. 3000 kg Return possible.