Used Ona Iris6 for sale (1,347)

Condition: used, functionality: fully functional, This is a round filter coffee machine, a Bravilor Bonamat B20 HW. This coffee machine is ideally suited for supplying coffee in large establishments during peak times, such as care facilities, catering businesses, company canteens, etc. The B HW series is equipped with a separate hot water tap. The containers are easy to transport. The machine has undergone a major inspection in our in-house workshop and is fully functional. It has only been operated with a water softener, so there are no limescale residues in the system. The matching drip tray for dispensing coffee is not shown in the picture, but it is also included. The base cabinets shown in the picture are not included in the offer, but can be purchased as an option. You will receive an invoice with VAT shown. Gusdpfjzbk Sxex Ai Nsc Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality brand-name equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or your money back Flexible choice of shipping or self-collection Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 seal Technical data: W x D x H: approx. 1173 x 600 x 947 mm Design with 1 brewing system and 2 containers Separate hot water tap With sight glass Coffee brewing unit Peak capacity: 40 liters Hourly output: approx. 90 liters Brewing time: approx. 14 min. / 20 liters Hot water unit Peak capacity: 4.6 liters Hourly output: approx. 20 liters Frequency: 50/60 Hz Voltage: 400 V 3 N Connection value: 11.2 kW Further details: 1 brewing column in the center 1 coffee container on the right and left, removable With hot water outlet: Coffee is kept warm in a container Audible signal at the end of brewing With timer Digital display Total and daily counters Descaling system Stainless steel housing Fixed water connection Condition: Used, major inspection performed, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is made exclusively according to our general terms and conditions (GTC).

Year of construction: 2026, condition: new, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro L from the premium manufacturer Rational (successor to the VCC 211). We have two identical iVario L units in stock, brand new. This unit is equipped with Balance Power (reduced connection value from 41 to 34 kW). This is new merchandise, original packaging, fully functional, and comes with a full manufacturer's warranty. The unit is available for immediate delivery. The offer does not include any accessories, but they can be purchased for an additional charge if desired. These are sample photos, as the goods are still in their original packaging. The list price for this unit is €19,976 net = €23,771.44 gross. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational service partner throughout Germany. Are you looking for a specific Rational equipment type? Ask us, we have access to a large selection of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our service for you: Full manufacturer's warranty / from commissioning High-quality brand-name equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1030 x 894 x 1078 mm Power connection: V: 400 / kW: 34 / Hz: 50 Year of manufacture: 2026 Gsdpjzbk Itjfx Ai Nsuc Capacity: 100 liters Weight: 216 kg Condition: New, original packaging, full manufacturer's warranty Additional information: Balance Power: reduced connection value from 41 to 34 kW Integrated 230 V socket Integrated hand shower with automatic retraction and spray dosage High-quality pot base, seamless with rounded corners Core temperature sensor with 6 measuring points 1,200 programs with up to 12 steps each, programmable and namable Integrated hose shower on the unit Integrated water drain in the pot Temperature unit adjustable in °C or °F Cooking pot can be tilted Lid with integrated water inlet Automatic display of service messages IPX5 splash water protection USB interface for HACCP data output and updates Including base unit with plastic feet Functions: Manual mode (30°C-250°C): Adjust liquid temperature, adjust pot base temperature, adjust oil temperature Automatic, liter-precise water filling device Delta-T cooking Auto Lift: Lifting and lowering device (baskets for cooking and frying) Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like a consultation or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are exclusively subject to our general terms and conditions (GTC).

Year of construction: 2026, condition: new, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro XL from the premium manufacturer Rational (successor to the VCC 311). We have two identical iVario XL units in stock, brand new. This unit is equipped with Balance Power (reduced connection value from 41 to 34 kW). This is new merchandise, original packaging, fully functional, and comes with a full manufacturer's warranty. The unit is available for immediate delivery. The offer does not include any accessories, but these can be purchased for an additional charge. These are example photos, as the goods are still in their original packaging. The list price for this unit is €26,366 net = €31,375.44 gross. You will receive an invoice with VAT shown. Service: We will be happy to help you find a certified Rational customer service provider throughout Germany. Our service for you: Full manufacturer's warranty / from commissioning High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Checked & fully functional - or money back Flexible shipping or self-collection Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Testing according to DGUV V3 Technical data: W x D x H: approx. 1365 x 894 x 1078 mm Power connection: V: 400 / kW: 34 / Hz: 50 Year of manufacture: 2026 Capacity: 150 liters Weight: 245 kg Condition: New, original packaging, full manufacturer's warranty Additional information: Balance Power: reduced connection value from 41 to 34 kW Integrated 230 V socket Integrated hand sprayer with automatic retraction and spray volume control High-quality pan base, joint-free with rounded corners Core temperature sensor with 6 measuring points 1,200 programs, each with up to 12 steps, programmable and nameable Integrated hose sprayer on the unit Integrated water drain in the pan Temperature unit adjustable in °C or °F Cooking pan can be tilted Lid with integrated water inlet Automatic display of service messages IPX5 splash water protection USB interface for HACCP data output and updates Including base with plastic feet Functions: Manual mode (30°C-250°C): adjust liquid temperature, adjust pan base temperature, adjust oil temperature Automatic, liter-accurate water filling system Delta-T cooking Auto Lift: lifting and lowering device (baskets for cooking and frying) Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Guodpfx Aszbk Efei Nsc Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are exclusively subject to our general terms and conditions (AGB).

Year of construction: 2020, condition: excellent (used), For sale: Noxon Ekko 12.1 pallet wrapper from 2013 This Noxon Ekko 12.1 is a reliable and user-friendly pallet wrapper that can be immediately deployed in any logistics or production environment. The machine is in good condition, fully functional, and equipped with a large 1650 mm rotating platform, including a ramp. Thanks to the powered pre-stretch system, the film is applied efficiently and tightly, resulting in lower film consumption and a consistent wrapping result. Key features: - 1650 mm rotating platform with ramp - Powered pre-stretch system for optimal film saving - Automatic height sensor - Adjustable wrapping programs for various applications - Simple operation via a clear panel - Robust and stable construction Technical specifications: - Model: Noxon Ekko 12.1 - Year of manufacture: 2013 - Power supply: 230V - Rotating platform: 1650 mm - Maximum pallet weight: 2000 kg - Maximum wrapping height: approximately 2400 mm - Film carriage: powered pre-stretch Condition of the machine: The machine is in good condition and functions perfectly. Ideal for companies looking for a reliable wrapper. A video of the machine can be sent via WhatsApp. Gedpfx Aijzbybpe Njuc We also supply wrapping film. For more information, please feel free to contact us. Trade-in of a (defective) pallet wrapper is possible. See also my other listings. Film wrapper, pallet wrapper, wrap machine, wrapping machine, pallet wrapping machine, wrapper, robot wrapper, wrapping robot, robot, wrapper, film, wrapper

Condition: new, functionality: fully functional, machine/vehicle number: 60.21.287, This is a tray rack trolley from the premium manufacturer Rational, suitable for combi-steamers of size 20-1/1. The tray rack trolley offers space for 15 x 1/1GN containers. With a rail spacing of 84 mm, you may achieve better utilization when loading compared to the tray rack trolley with 20 slots. Rational article number: 60.21.287 The recommended retail price (RRP), gross, is: €2528, our special price: €1399 gross. Gujdpjyfuhrofx Ai Noc You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational equipment type? Ask us, we have access to a large selection of used and new equipment. We will be happy to advise you on all equipment types. Our used equipment service for you: * 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs * High-quality branded equipment at fair prices * Professional refurbishment / inspection & expert cleaning * Tested & fully functional - or your money back * Flexible shipping or self-collection options * Competent advice - before and after purchase * Provision of operating instructions, connection diagrams & spare parts * Inspection according to DGUV V3 Technical data: * L x W x H: 824 x 561 x 1743 mm * Clearance from the lowest tray to the oven opening: 142 mm * Clearance from the top tray to the oven opening: 131 mm * Max. tray height: 1.60 m * Weight: 34.9 kg * Material: Stainless steel * Article number: 60.21.287 Condition: New Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would like advice, or would like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2026, condition: new, Trommel screens for Doppstadt, Terra Select, Komptech, Pronar & many other manufacturers. Highest European quality – suitable for almost all common trommel screening machines. We offer high-quality trommel screens manufactured in Europe for nearly all well-known trommel screening machines. Suitable for, among others: Doppstadt SM 314 / SM 414 / SM 518 / SM 618 / SM 620 / SM 720 / SM 725 Terra Select T4, T5, T6, T7 Komptech Maxx, Mustang, Nemus, Cribus Pronar Terex Neuenhauser and many other makes and models. Technical Features Manufactured according to customer requirements Round or square perforations Straight or staggered hole arrangement Smallest bridge widths for maximum screening performance Welded spirals for optimal material transport Various material thicknesses available Gsdpfozdbq Dsx Ai Neuc High-quality, sharp-edged perforated sheets made of special steel Individual hole sizes available on request Your Advantages ✓ Highest quality from European production ✓ Many models available from stock in the short term ✓ Short delivery times ✓ Attractive prices ✓ Delivery throughout Germany and Europe ✓ Technical advice and custom designs possible We will gladly prepare an individual offer for your machine. Contact us – we will be happy to advise you.

Year of construction: 2026, condition: new, Trommel screens for Doppstadt, Terra Select, Komptech, Pronar & many other manufacturers. Highest European quality – suitable for almost all common trommel screening machines. We offer high-quality trommel screens manufactured in Europe for nearly all well-known trommel screening machines. Suitable for, among others: Doppstadt SM 314 / SM 414 / SM 518 / SM 618 / SM 620 / SM 720 / SM 725 Terra Select T4, T5, T6, T7 Komptech Maxx, Mustang, Nemus, Cribus Pronar Terex Neuenhauser and many other makes and models. Technical Features Manufactured according to customer requirements Round or square perforations Straight or staggered hole arrangement Smallest bridge widths for maximum screening performance Godpozdbqwefx Ai Neuc Welded spirals for optimal material transport Various material thicknesses available High-quality, sharp-edged perforated sheets made of special steel Individual hole sizes available on request Your Advantages ✓ Highest quality from European production ✓ Many models available from stock in the short term ✓ Short delivery times ✓ Attractive prices ✓ Delivery throughout Germany and Europe ✓ Technical advice and custom designs possible We will gladly prepare an individual offer for your machine. Contact us – we will be happy to advise you.

Condition: excellent (used), Year of construction: 2015, Oce Arizona 660 XT Year of manufacture: 2015 (201 units produced) Color: 6C 4C+2 White (dual printhead configuration) Speed: Up to 67 m²/h Format: 3.05m x 2.5m Optional: Roller system Currently in production. Godpozb I Nuefx Ai Njuc In excellent condition, serviced by Canon Germany.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Guedpfjy S Ru Aox Ai Noc Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, year of last overhaul: 2026, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Guodoy S Rtlopfx Ai Noc Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: E22SH15072467031, This listing is for a Rational SCC 202 WE electric combi-steamer, manufactured by the premium brand Rational. This XXL-format combi-steamer offers capacity for 20 x 2/1 GN trays or 40 x 1/1 GN trays. The unit is from the year 2015 and has undergone a comprehensive inspection in our in-house workshop; it is fully operational. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in finding a certified Rational service partner anywhere in Germany. Looking for a specific Rational model? Ask us! We have access to an extensive range of used and new equipment. We are pleased to advise you on all Rational model types, including SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: • 6 months warranty on electrical parts, limited to replacement of defective parts without installation or removal costs • High-quality branded units at fair prices • Professional refurbishment, inspection, and expert cleaning • Flexible shipping or pickup options • Competent advice before and after purchase • Provision of operating manuals, connection diagrams, and spare parts • DGUV V3 safety inspection This combi-steamer accommodates 20 x 2/1 GN or 40 x 1/1 GN containers. In automatic mode, the oven automatically detects the ideal cooking path, load size, amount, and product-specific requirements for 7 applications (meat, fish, poultry, sides, egg dishes, baked goods, and finishing). Technical data: • W x D x H: approx. 1084 x 996 x 1782 mm • Minimum door opening for transport (W x H): 1145 x 1900 mm • Power supply: V: 400 / kW: 65.3 / Hz: 50/60 • Weight: approx. 351 kg • Serial number: E22SH15072467031 • Year of manufacture: 2015 Condition: Used, freshly inspected, fully functional Further specifications: • Three operating modes in combi-steamer mode: steam (30°C to 130°C), convection (30°C to 300°C), and combination (30°C to 300°C) • Core temperature probe • Retractable hand shower • 8.5" color display with touchscreen • 5 programmable fan speeds • Integrated, maintenance-free grease separation system • Automatic pre-selection of start time • 7 cleaning programs for unattended cleaning, including overnight • Adjustable humidity in 3 stages (30°C to 260°C) • 5 programmable proofing stages • USB interface • Seamless, hygienic cooking chamber design with rounded corners Gujdpfx Asym Dd Sei Nec • Halogen chamber lighting • Meals per day: 300-500 Shipping: • Delivery or pickup by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Do you have questions, need advice, or wish to view the unit on site? You can reach us by phone during our business hours: Monday-Friday 09:00–13:00 and 14:00–17:00. Sale only according to our General Terms and Conditions (AGB).

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: ET1PA23085067157, This is an Ultravent Plus hood from the manufacturer Rational, type UV PLUS 61/101/E, manufactured in 2023. It is suitable for the following Index series: Index H and I, as well as for DUO appliances or individual units. This hood not only captures escaping vapors but also eliminates odors and smoke. You do not need an exhaust duct to the outside. An LED lamp automatically indicates when you need to change the filter. This model features stainless steel baffle filters and a pre-filter mat located behind them. This protects the activated carbon filter, which is the heart of the hood, from becoming contaminated too quickly and ensures optimal functionality. This Plus condensation hood can be optimally used in the front area, in enclosed spaces, or during show cooking. Retrofitting and installation on Rational SCC 61/101 WE units can be carried out with little effort. The hood has been inspected in our in-house workshop, and new ACTIVATED CARBON FILTERS have been installed. Fully functional with a 6-month warranty. Immediately available, list price approx. €9,000 gross. Our special price: €4,998 gross. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational customer service provider throughout Germany. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts without installation and removal costs. High-quality branded equipment at fair prices. Guodpfswmdkmjx Ai Njc Professional overhaul/inspection & expert cleaning. Tested & fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 854 x 1226 x 628 mm Minimum dimensions of the door opening for transport: W x H: 845x850mm Serial number: ET1PA23085067157 Year of manufacture: 2023 Power connection: V: 200 - 240 / Hz: 50-60 Weight: approx. 95 kg Condition: Used, inspected, fully functional. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to request a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are exclusively subject to our general terms and conditions (GTC).

Year of construction: 2007, condition: refurbished (used), functionality: fully functional, This is a combination steam oven from the manufacturer Rational, model SCC 61, in an electric version. The unit is equipped with a racking system for 6 trays. The base unit shown in the picture is not included in the offer but can be purchased as an option. The combination steam oven has been refurbished in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. Our used equipment service for you: • 3 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs Gedpfx Aioy U Erno Nsuc • High-quality brand-name equipment at fair prices • Professional refurbishment / inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or self-collection options • Competent advice • before and after purchase • Provision of operating instructions, connection diagrams & spare parts • Inspection according to DGUV V3 Operating modes: • Hot air 30°C to 300°C • Combination of steam and hot air 30°C to 300°C • Vario steaming at 30°C to 99°C • Finishing • Steaming at 100°C Technical data: • W x D x H: approx. 847 x 776 x 782 mm • Power connection: V: 400 / kW: 10.0 / Hz: 50 • Weight: approx. 110 kg • Serial number: E61SE07052099748 • Year of manufacture: 2007 • Capacity: 6 x 1/1 GN Condition: used, refurbished, fully functional Additional information: • Core temperature sensor from 30°C to 99°C • Handheld spray gun with automatic retraction • Fast oven cavity cooling thanks to Cool Down function • Adjustable temperature in °C or °F • Longitudinal tray suitable for 1/1, 1/2, 1/3, 2/3, 2/8 GN containers • Safe halogen oven lighting with Ceran glass • The automatic separation of fat guarantees clean oven air • Automatic cleaning program Clean Jet Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would like advice or would like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 09:00 to 13:00 and from 14:00 to 17:00. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: new, Year of construction: 2025, functionality: fully functional, The granulate mixer is available in 6 versions: Design can be stainless steel or painted steel: Technical specifications : MV 2 The MV 2 for the complete mixing of all plastic granules, due to the forced guidance by screw sleeve. Godpfx Aisd R Atrs Neuc Tank capacity : 120 kg/ 200L L x W x : 700 mm x700mm x height: 1050mm/ 1250mm - screw, removable - Control for mixing times - suction device - 1 drain - Underframe mobile, castors 100 mm, all with locking brake.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baler Presona LP 85 VH2 with cross tying, year of construction 2018 Technical data: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of construction: 2018 Drive power: 2 x 45 kW Gusdpfoyz Snpox Ai Nec Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical throughput: 1,200 cbm/h Throughput at 30–100 kg/cbm: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2,000 L Transport dimensions of press: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: approx. 27,000 kg The baler was dismantled from running operation. Technical documentation is available. Please note: All technical data is based on manufacturer’s specifications. We accept no liability for the accuracy of the information provided or for possible errors. The offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: 7001922, input voltage: 400 V, Equipped with 4 M-20iD/12L Fanuc robots. Gujdpfx Aisy T Ulzj Nec Installation dimensions: 16,000 x 4,000 x 3,400 mm.

Condition: used, table dimensions 500 x 1.200 mm number of T-slots 30 distance t-slots 125 mm distance spindlenose to table 110 - 760 mm Swing radius 535 - 1.135 mm Gedey Umg Tjpfx Ai Nsuc boring range 600 mm work height max. 800 mm quill stroke 200 mm Height adjustment of the drill head 450 mm no. of turning speeds 18 turning speed range 35 - 1.800 U/min bore capacity in St 60 - in full material Ø40 mm bore capacity in GG 22 - in full material Ø50 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: excellent (used), load capacity: 6,000 kg, table load: 6,000 kg, Welding turntable with 6 ton load capacity Speed steplessly adjustable from approx. 0.01 to 1.1 rpm Diameter 2.15 m New electrics With hand and foot remote control Godpfowz Rfyox Ai Njuc

Condition: used, Year of construction: 2002, total height: 2,900 mm, total length: 4,300 mm, total width: 1,500 mm, Colour: Grey - Year: 2002 - Documentation available: No - CE certificate present: No - Capacity [m³/h]: 5500 - Number of filter bags [pcs]: 48 - Filter length [mm]: 2000 - Filter diameter [mm]: 230 - Filter surface area [m²]: 73 - Connection diameter [mm]: 310 - Number of connections [pcs]: 1 - Main fan [pcs]: 1 - Main fan power [kW]: 4.0 - Extinguishing system: Yes - Disassembled: Yes - Control cabinet present: Yes - Collection bags: Yes - Number of bins/bags [pcs]: 3 - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 4.0 - Transport dimensions: 4300mm x 1500mm x 2900mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Guodpfx Aisw Hcd So Nsc

Condition: used, drilling capacity: 23 mm, Equipment: type plate available, Fast radial drilling machine – bench drilling machine Donau Werkzeugmaschinen DR23 radial drilling machine Serial number 2062-4 Operating voltage 380 volts with neutral conductor, 50 Hz, 3-phase Drilling capacity: up to approx. Ø 50 mm Speed range 58 - 1275 rpm Threading device, overhang 920 mm Machine light Base plate, table size approx. 1100x400 mm Motor power approx. 1.5 kW, without coolant system 2 T-slots at the rear left Weight: approx. 1,200 kg The arm is pivotable, height-adjustable, and can be moved in length and depth. At the push of a button, the desired position can be achieved by pivoting, pulling, and pushing, and then fixed in place. An inspection while the machine is powered on is possible after prior appointment. Gusdpfx Aiowybqqe Nec All technical specifications are subject to printing errors and omissions. Price on request Sale exclusively to countries within the EU.

Condition: like new (used), Year of construction: 2021, Hardly used Donaldson Dalamatec Torit DCE Filterunit Typ: DLMV20/10k5 Fan: 2,2kW Filtersurface: 20m2 Weight: 380kg Atex version Incl. filter frames 3 pieces available Also Gedpfxsmi Rn Nj Ai Nouc 2 pieces DLMV6/10K3 available (2010)

Condition: used, functionality: fully functional, This is a condensation trap from the manufacturer Rational. The condensation trap is suitable for the Rational combi-steamer SCC/WE 201, 202. The condensation trap generates an accelerated rise of steam and other vapors from the ventilation pipe. Vapors and gases can thus be specifically directed via a pipeline to an extraction system. You will receive an invoice with VAT shown. OUR USED EQUIPMENT SERVICE FOR YOU High-quality branded equipment at fair prices Professional refurbishment / inspection & expert cleaning Guodpfx Aiey T Icae Nec Tested & fully functional Flexible choice of shipping or self-collection Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Testing according to DGUV V3 Technical data: Dimensions: W x D x H 10 x 7.5 x 45.8 cm Weight: 1.3 kg Connection diameter: 7 cm Application: SCC/WE 201, 202 Article numbers 60.72.593 Material: Stainless steel / CNS 1.4301 / AISI 304 Condition: used SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to request a consultation or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: used, functionality: fully functional, This is a condensation trap from the manufacturer Rational. The condensation trap is suitable for the Rational combi-steamer series, iCP 61-102, SCC/WE 102 & CPC, SCC 102, 210, 202. The condensation trap creates an accelerated rise of steam and other gases from the vent pipe. Steam and gases can thus be directed in a targeted manner via a pipeline to an exhaust system. You will receive an invoice with VAT shown. OUR USED EQUIPMENT SERVICE FOR YOU: High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Testing according to DGUV V3 Technical data: Dimensions: W x D x H 10 x 7.5 x 45.8 cm Weight: 1.3 kg Connection diameter: 6.5 cm Application: iCP 61-102, SCC/WE 102 & CPC, SCC 102, 210, 202 Article numbers 60.72.592 Material: Stainless steel / CNS 1.4301 / AISI 304 Gusdpoy T Ibcofx Ai Noc Condition: used SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, functionality: fully functional, This is a condensation trap manufactured by Rational. The condensation trap is suitable for the Rational SCC/WE 61/62/101 combi-steamer series, as well as for CM/P 61/62/102. The condensation trap creates an accelerated rise of steam and other vapors from the vent pipe. Vapors and gases can thus be directed via a pipeline to an exhaust system. You will receive an invoice with VAT shown. OUR USED EQUIPMENT SERVICE FOR YOU: High-quality branded equipment at fair prices Professional refurbishment / inspection & expert cleaning Checked & fully functional Flexible options for shipping or self-collection Competent advice - before and after purchase Provision of operating manuals, connection diagrams & spare parts Testing according to DGUV V3 Technical data: Dimensions: W x D x H 10 x 7.5 x 45.8 cm Weight: 1.3 kg Connection diameter: 5.5 cm Application: SCC/WE 61/62/101 as well as for CM/P 61/62/102 Article numbers: 60.72.591 Gedpfx Asy T Ia Eji Nouc Material: Stainless steel / CNS 1.4301 / AISI 304 Condition: used SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday, 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2007, x-travel 800 mm Guodpfsy T Scwjx Ai Nsc y-travel 650 mm z-travel 500 mm Control Heidenhain iTNC 560 spindle tunring speed 12.000 U/min In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!