Used Huta Zygmunt Mpm 6300B for sale (354)

Condition: new, Year of construction: 2026, Overbelt magnetic separator, magnetic tape, overbelt magnet, magnet separator, metal detection, demetallization plant Our all-round talent - overbelt magnetic separator is for sale Permanent overbelt magnetic separator TYPE PEM1200 1200x550x200mm ===== 4x ring screw for suspension PU conveyor belt endless GB30 black matt Magnet dimensions: 700x230x120mm 7 x T20 studs high-frequency welded High-quality triple aluminum construction Hnjdpfxshupkmj Al Tsr Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-55 0.18 KW three-phase gear motor GEMOTEG 2 pcs. side protection plates V4A Magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole pieces.

Condition: new, Graco Monark 222839 Series H07A air-powered pump with 222791 air motor, serial number as shown in the photo, unused and in opened original packaging, 100% functional. Hjdpei Eacljfx Al Tenr

Condition: used, mileage: 437,000 km, first registration: 10/2017, gearing type: automatic, Year of construction: 2017, = Additional Options and Accessories = - Air suspension = Notes = Iveco Eurocargo 140 E 250 freezer vehicle with Mitsubishi diesel refrigeration unit, Lamberet Multitemp – box body and tail lift. FRC / ATP: NEW!! • EURO 6 C emission standard • Cruise control • Leaf/air suspension • Automatic transmission • Lane departure warning system • Brake assist system • Hill start assist • Differential lock • ABS • ASR / switchable • Airbag • Air conditioning • Central locking • Double passenger seat (3-seater) • Electric windows • Fog lights • Headlight range adjustment • Tire size: 285/70 R 19.5 • 14,000 kg GVWR • Unladen weight: 8,500 kg • Payload: 5,500 kg! • Vehicle overall dimensions: 9,030 x 2,600 x 3,420 mm (L x W x H) LAMBERET freezer box body, year of manufacture 2016 • 2 temperature zones with longitudinal partition 2/3 to 1/3 • Internal dimensions Zone 1: 6,980 x 800 x 2,150 mm (L x W x H) with sliding partition! • Internal dimensions Zone 2: 6,980 x 1,700 x 2,150 mm (L x W x H) • 17 pallet spaces • Portal doors at the rear • Aluminum corner protectors 2 x right and left, bottom and top • Tie-down rails, double on the right and left • Floor: aluminum tread plate BÄR BC1500 S4- B4 tail lift, vertical • 1,500 kg load capacity Mitsubishi TU 100 SA Multi refrigeration unit (year of manufacture 2016): • Diesel / Electric (380 V) • Remote control in the driver's cab • Temperature recorder - German vehicle - 1st owner! Hnedpfx Alowmmxmo Tsr - TÜV / MOT: new! Errors and prior sale excepted! = Additional Information = Reserved: This vehicle is reserved for a customer (subject to sale).

Year of construction: 2018, condition: new, machine/vehicle number: DMPMFG200x200, Magnetic filter grid in housing / cabinet construction V2A quality (for free-fall applications to investigate dry and free-flowing bulk solids) Hnedpfx Asdtdwael Tor Magnetic grid 200x200mm High-quality cabinet construction completely closed Easy cleaning by pulling out the magnetic cores High quality magnetic filter rods completely closed Magnet NdFeB N45, Br 8500 Gauss Tmax 80 ° C 4x M10 threaded rod incl. Wing nut as clamping unit Guide rod center: Entrance level right Outlet below

Condition: new, Year of construction: 2025, Overband Magnetic Separator – Type DMPM 2000 | Industrial Version Manufacturer: die magnetprofis GmbH & Co. KG Model: DMPM 2000 Condition: New / unused Availability: Immediately ex stock ⸻ Hnsdswx H E Djpfx Al Tor Technical Description: The DMPM 2000 overband magnetic separator is engineered for the reliable and continuous removal of ferromagnetic contaminants from product streams. It is ideally suited for use in recycling plants, bulk material processing, crushing plants, conveyor lines, and material processing facilities. ✅ Key Features: • Design: Cross-belt discharge with motor & discharge belt • Magnet type: Permanent magnet (maintenance-free) • Belt width: 650 mm • Magnet length: approx. 2000 mm • Support structure: Robust welded steel construction • Drive: Electric motor with low-maintenance gearbox • Ready to operate: Pre-assembled, ready for operation, incl. lifting lugs • Options: Control unit in the form of a frequency converter, gallows for suspension ⸻ Fields of Application: • Recycling industry (metal, wood, construction debris, etc.) • Conveyor systems in the cement, energy, or waste sectors • Protection of downstream machinery (e.g., shredders, crushers, mills) • Food industry (optionally available in stainless steel version) ⸻ Scope of Delivery: • Overband magnetic separator DMPM 2000 (new unit) • Conveyor belt with drive unit • Suspension system (chains as required) • Documentation (operating manual, CE conformity) • Optional: Control – frequency converter Our core competence is delivering exactly what our customers truly need. Together with our customers, we develop tailored, application-specific solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, grid magnets, metal separator, block magnet, filtration systems

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnet separator TYPE DMPM800 1,400 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with clamping bearings. Drive: GEMOTEG 1.1KW slip-on gear motor, speed 0.4-0.6m/sec Connection 400V, 50Hz, protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 7 TG-40 studs high frequency welded Belt material: 3-layer, particularly transversely stable * equipped with rust-proof alligator connectors RS125 Magnet properties: Built-in magnetic core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnetic core encased in soft iron so that very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole shoes tightly closed and sealed. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Hnsdpfx Alehun Uij Tor Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Year of construction: 2020, condition: like new (used), Magnetic tape, overbelt magnetic separator, magnetic filter, lifting magnet, overbelt magnet Permanent overbelt magnetic separator TYPE PEM1800 1800x1000x400mm ===== 4x ring screw for suspension Hsdpfjhun Uuex Al Tjnr Magnet dimensions: 800x500x180mm PU conveyor belt with hard cover, matt black Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-65 Three-phase gear motor GEMOTEG 1.1KW Cladding: RAL 5015 Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnetic separator TYPE DMPM1200 1.800 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnetabmessungen: 1.200x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with tension bearings. Drive: GEMOTEG shaft-mounted geared motor 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz Protection class IP54 Hnodotxn Iropfx Al Tsr Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 9 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply especially transversely stable * equipped with stainless alligator connectors RS125 Magnetic properties: Built-in magnetic core: Strontium ferrite Y30 Bonded SfRe strontium hard ferrite magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole pieces tightly closed and sealed.

Condition: ready for operation (used), Year of construction: 2024, Permanent overbelt magnet separator TYPE DMPM1400 Hodpohun U Uefx Al Tsnr 2.000 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnet dimensions: 1.400x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with clamping bearings. Drive: GEMOTEG 1.1KW slip-on gear motor, speed 0.4-0.6m/sec Connection 400V, 50Hz, protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 10 TG-40 studs high frequency welded Belt material: 3-layer, particularly transversely stable * equipped with rust-proof alligator connectors RS125 Magnet properties: Built-in magnetic core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnetic core encased in soft iron so that very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole shoes tightly closed and sealed. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Condition: new, Year of construction: 2024, Permanent overbelt magnetic separator TYPE DMPM1000 1.600 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnetabmessungen: 1.000x500x180mm Hnsdpfxjtxn Ewe Al Ter Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with tension bearings. Drive: GEMOTEG shaft-mounted geared motor 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz Protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 8 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply especially transversely stable * equipped with stainless alligator connectors RS125 Magnetic properties: Built-in magnetic core: Strontium ferrite Y30 Bonded SfRe strontium hard ferrite magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole pieces tightly closed and sealed. conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying customers with exactly what they really need. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by telephone to find a suitable solution for your application.

Condition: new, thread dia. 20 M turning speeds 400 U/min thread M 4 - M 20 M Hnjdpfxexaaa Is Al Ter working area 1900 Rmax. working range 200 Rmin. Description: The AT models have a radius of up to 1900 mm and their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - including 7 thread cutting inserts • M3 20111812 DIN 371 19 • M6 20111823 DIN 371 31 • M8 20111824 DIN 371 31 • M10 20111826 DIN 371 31 • M12 20111827 DIN 376 31 • M16 20111829 DIN 376 31 • M20 20111831 DIN 376 31 - Control valve with lubrication - Including air motor - Adapter connection size 2 - The cutting head can be pivoted vertically downwards by 90 ° - The cutting head is pivoted and rotatable through 360 ° - Operating instructions in German * without the perforated table as per Fig.

Year of construction: 2016, condition: new, machine/vehicle number: DMPMP260x104x41,5, Plate magnet in NdFeB Neodymium version 260 x 104 x 41.5mm Completely welded housing 4 tapped holes M8x20mm Edge distance: 40mm -BHmax: 263-279 kJ / m³ Br: 1170-1210, JHc:> 955KA / m Hnodpfx Ajc Tctksl Ter Maximum operating temperature: 80 ° C This is an overproduction which has not been accepted by the customer. More than 10 pcs.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 26.5 kW (36.03 HP), type of input current: three-phase, type of cooling: air, overall weight: 365 kg, input voltage: 400 V, total width: 1,150 mm, total length: 1,950 mm, total height: 1,400 mm, warranty duration: 12 months, heating capacity: 31 kW (42.15 HP), Aircooled chiller/Heat pump KAMPMANN WSAN XSi 14.1 26.5 kW/31 kW Cooling capacity: 26.5 kW / 7.53 tons (12/7 — 35°C) Heating capacity: 31 kW / 8.81 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric LNB65FAEMC (rotary, inverter) Type of refrigerant: R410a Number of fans: 1 pcs. ZKSN-750-8-10 Hydraulic module: 1 pcs. water pump WILO BAC40-125-0,75 Dimensions: 1.95x1.15x1.4 m. Weight: 365 kg. Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Hjdpfxowbdhns Al Tjnr After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Alternative names used in European markets: Kaltwassersatz (DE), Gruppo frigorifero industriale (IT), Groupe froid industriel (FR), Chiller wody lodowej (PL), Agregat frigorific (RO), Enfriadora industrial (ES). This unit is listed in English for international buyers.

Condition: used, Year of construction: 2009, CNC series 245 A 3l T R DH, control system, manufacturer: Siemens, type: Sinumerik 840D SL, 2 spindle units (1x external type WMZ; 3x internal, manufacturer: GMN, type HSX 150-24.000/23 with tool holder HSK 63; grinding spindle turret), 2 cross slides, 2x C-axis, 2x magnetic chucks Ø 800 mm, workpiece Ø max. 1,000 mm, workpiece length max. 400 mm, spindle speeds max. 1,000 rpm, table travel X1/X2 axis 885 mm, table travel Z1/Z2 axis 1,000 mm, 4 table levelers, electronic balancing system MPM, coolant system, manufacturer: Liqui, type KSS system MTBF V500, MW250, capacity 1,900 l, band filter, temperature control, manufacturer: Hyfra, chip conveyor, switchgear and control cabinets, platform, table system, 5-piece, 3 drawer cabinets, 5 drawers, contents: setup tools, machine accessories. Hnedpfx Alszgvlyj Tor

Condition: excellent (used), Catalogue number: 7853 TECHNICAL DATA - Max. diameter of main saw blade without scorer: 400mm - Max. diameter of main saw blade with scorer: 350mm - Main blade adjustment (height/tilt): electric - Arbor diameter: 30mm - Arbor lock - Sliding table included - Side carriage + angle stop included - Sliding table length: 3000mm - Cutting width at rip fence: 1350mm - Side carriage included - Scoring unit included - Max. scorer blade diameter: 120mm - Scoring motor power: 0.75kW - Main motor power: 6kW - Motor for height adjustment: 0.25kW - Motor for tilt adjustment: 0.25kW - Three spindle speeds: 3500/4500/6000 rpm - Table dimensions: 1220x650mm - Table extension: 1920x1450mm - Large blade guard Hnedpezum Diefx Al Tsr - Extraction port diameters: 80mm, 125mm - Machine dimensions (LxWxH): 3500x3460x1500mm - Weight: 1000kg ADVANTAGES – Manufactured in Poland – Equipped with scoring unit – DTR documentation + CE certificate – Used saw, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (according to 4.2 EUR exchange rate) (Prices may change with significant currency fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8041 TECHNICAL DATA - shaft width 240mm Hsdpfjzkvhiox Al Tenr - shaft diameter 260mm - inlet width 250mm - inlet height 120mm - number of knives 9 pcs - automatic reversing with adjustment capability - screen dimensions 30mm - toothed drive shaft (bottom) 0.75kW - toothed drive shaft (top) 0.75kW - with conveyor belt 2060x260mm - feeder motor with conveyor belt 0.55kW - main motor 15kW - feeder dimensions (length/width/height) 2270x700x600mm - machine dimensions (length/width/height) 1550x850x700mm - weight 800kg ADVANTAGES - German production - automatic reversing with adjustment capability - with conveyor belt - very good condition - used shredder Net price: 29900 PLN Net price: 7119 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8039 TECHNICAL DATA - inlet width 320mm - inlet height 160mm - roller width 320mm - blade length 310mm Hnodjzkvglspfx Al Tsr - number of blades 2 pcs - toothed drive roller, top - toothed drive roller, bottom - vibratory feeder with magnet 1650x310mm - automatic reversing - main motor 22kW - feed motor 2×1.1kW - machine dimensions with vibratory feeder (length/width/height) 2600x1500x1800mm - machine and vibratory feeder weight approximately 1500kg ADVANTAGES – Austrian made – vibratory feeder with magnet 1650mm – automatic reversing – original DTR documentation – used shredder, very good condition Net price: 34900 PLN Net price: 8310 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8040 Hjdpfjzul Dhsx Al Tenr TECHNICAL DATA - dimensions of the loading hopper (top, length/width): 850x1180mm - rotor width: 350mm - engine: 22kW - screen size: 12mm - number of knives: 6 pcs - dimensions (length/width/height): 1260x1200x1890mm - weight: 980kg ADVANTAGES – German-made – very good condition – used shredder Net price: 25900 PLN Net price: 6167 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to fluctuations in the exchange rate)

Condition: excellent (used), CATALOGUE NUMBER 8038 TECHNICAL DATA - Inlet of the loading hopper: 800x600mm Hnjdpozkvb Asfx Al Tsr - Outlet for shredded wood: diameter 160mm - Working width of the rotor: 600mm - Main engine: 15kW - Pump engine: 0.75kW - Tank capacity: 0.4m3 - Number of blades: 14 pcs - Blade dimensions: 30x30mm - Screen: 15/10mm - Presser drawer - Electric auto-reverse - Dimensions (length/width/height): 1800x1120x1760mm - Weight: 930kg ADVANTAGES - German production - Presser drawer - Auto-reverse - Used wood chipper, very good condition Net price: 31900 PLN Net price: 7595 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOG NUMBER: 7949 Technical data: - Track width: 380 mm - Shaft width: 420 mm - Max saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max cutting height: 120 mm - Table width with clearance: 1060 mm - Table length: 2050 mm – Top section: - Pawl/anti-kickback row - Metal pressure roller - Kickback fingers - 2 metal feed rollers - Hold-down clamp - Saw shaft - 3 metal pressure feed rollers Hedszkuawjpfx Al Tjnr – Bottom section: - Guide - Kickback fingers - Track - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 30 kW - Centralized track lubrication - Extraction outlet diameter: 250 mm - Roller tables: 2 pcs 1st table length: 3500/800 mm 2nd table length: 2550/800 mm - Roller width: 700 mm - Table height: 950 mm - Overall dimensions (LxWxH): 2950 x 2000 x 2000 mm - Weight: approx. 3000 kg Advantages: - Made in Germany - 2 roller tables - Used multirip saw - Very good condition Net price: 32,900 PLN Net price: 7,833 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7901 Technical specifications: - track width: 300mm - working width of roller: 300mm - max saw blade diameter: 350mm - saw blade bore diameter: 70mm - max cutting height: 120mm - table width with extension: 750mm - table length: 1530mm - from above: - kickback prevention barriers (safety barrier against material reverse) - metal sliding roller - kickback prevention barriers - metal sliding roller - shaft with saw blades - 2 smooth metal sliding rollers - from below: - guide rail - kickback prevention barriers - track - central track lubrication - stepless feed speed adjustment Hsdszul Akepfx Al Tjnr - feed motor: 1.5kW - main motor: 22kW - brake - suction nozzle diameter: 200mm - overall dimensions (L/W/H): 2300x1370x1570mm - weight approx.: 1700kg ADVANTAGES – Italian manufacturing – very good condition – technical DTR documentation – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR (calculated at 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER: 7480 Technical data: - Track width: 360mm - Shaft width: 350mm - Max. blade diameter: 350mm - Blade bore diameter: 80mm - Max. cutting height: 120mm - Table size: 2040x1220mm From above: - Pawls - Driving/sprocket shaft - Pawls - Shaft with saw blades - Sliding, pressure shaft From below: - Rollers in front of the table, 2 pcs - Guide - Pawls - Track - Central track lubrication - Electric height adjustment of saw blade shaft - Electric height adjustment of the body - Stepless feed speed control - Extraction outlet diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight: approx. 4000kg ADVANTAGES Hedpezulzmofx Al Tjnr – Czech production – Used multirip saw – Very good condition Net price: 30,900 PLN Net price: 7,360 EUR (depending on EUR exchange rate of 4.2) (Prices may change with large fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7817 TECHNICAL DATA DDCA – Double-sided profiling machine - length of moulding 180 – 850mm - width of moulding 30 – 75mm - thickness of moulding 10 – 45mm - spindle diameter 30mm - max. cutter diameter 250mm - 4 cutters included 5 spindles: left side: - 1) vertical upper 2.2kW - 2) horizontal lower 2.2kW right side: - 1) vertical lower 2.2kW - 2) vertical upper 2.2kW - 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - 2 material clamping devices - stepless feed rate adjustment 0-10m/min - central lubrication via oil pump - pump motor 2.2kW - diameter of dust extraction nozzle 5x100mm - dimensions (L/W/H) 1900x2230x1530mm DDGA – Four-sided planer - width of workpiece 35 – 130mm - thickness of workpiece 10-60mm - min. length of workpiece 200mm spindle arrangement: - 1) lower 5.5kW - 2) right 5.5kW - 3) left 5.5kW - 4) upper 5.5kW - spindles adjustable up/down - upper and lower spindle diameter 40mm - right and left spindle diameter 30mm - 4 feed rates 13/20/26/40 - central lubrication of chain via oil pump - diameter of dust extraction nozzle 4x120mm - dimensions (L/W/H) 3200x1370x1830mm DBCA – Profiling machine feeder - max. feed rate 40m/min - max. width of moulding 150mm - motor 0.55kW - overall dimensions (L/W/H) 2320x600x1150 Hjdpfxezkt Rze Al Tjnr DBGA – Moulding feeder - length of mouldings 200-600mm - width of mouldings 30-20mm - thickness of mouldings 10-40mm - stepless feed rate adjustment 10-40m/min - motor 0.75kW - overall dimensions (L/W/H) 1500x500x980mm - total weight approx. 4900kg Net price: 63900 PLN Net price: 15200 EUR depending on the exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes, to identify the product. We only resell products that the manufacturer has previously placed on the market. We have no business relationship with the manufacturer.

Condition: excellent (used), CATALOGUE NUMBER 7958 TECHNICAL DATA - Maximum cutting height: 120mm - Shaft width: 510mm - Shaft diameter: 75mm - Maximum sawblade diameter: 400mm Hnjdezulypepfx Al Tsr – From above: - 2 rows of anti-kickback fingers - toothed feed roller - toothed outfeed roller – From below: - anti-kickback fingers - 2 toothed feed rollers - arbor with sawblade - toothed outfeed roller - 6 feed speeds - Hydraulic motor (for extension, feed, rollers): 3kW - Main motor: 22kW - Infinitely variable feed speed - Control stand dimensions: 700x600x1000mm - Overall dimensions (L/W/H): 2300x1450x1600mm - Weight approx. 2650kg ADVANTAGES – Turkish production – Robust construction – Used machine, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 6763 Hedpfszulxlsx Al Tjnr TECHNICAL DATA - 5 piston cylinders - 3 upper - 2 side - max length of glued elements: 3100mm - max height of glued elements: 2100mm - motor power: approx. 2kW - upper cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700mm - weight: approx. 800kg ADVANTAGES – very good condition – used press – not repainted – designed for professional use Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may be adjusted)