Used Hofmann Good Condition / Year Of Construction 1978 / Holz-Her Feed Unit for sale (92,734)

Condition: good (used), Year of construction: 1997, machine/vehicle number: 1349, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 850 mm, edge thickness (max.): 60 mm, total height: 1,725 mm, total length: 7,540 mm,

Condition: good (used), Year of construction: 1966, Spindle moulder type 54F, year 1966, V-belt drive, reversible (left/right rotation), 4 spindle speeds, 30 mm spindle, 3 kW, transport dimensions 940 x 780 x 1200 mm, weight 480 kg. Transport available at extra cost! Kodpfxey E Nuhe Aamonc

Condition: good (used), Year of construction: 1988, functionality: fully functional, Double mitre saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade 330 mm Ø - Cutting area at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg Kodpoygm Akefx Aamonc - Pneumatic clamping device Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: used, axle configuration: > 3 axles, first registration: 11/2006, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 2,240 mm, total length: 13,600 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, Year of construction: 2006, Meusburger MPG-4 4-axle sliding tarp semi-trailer Year of manufacture: 2006 First registration: 11-12-2006 Chassis number: W09PG400760M49844 Equipment: 4 axles 1st axle liftable Last 2 axles steered Sliding tarpaulin Sliding roof Support legs Lashing eyes in the loading area Ramp at the rear 2 spare wheels German registration Dimensions: Fifth wheel height: 1.17 m Loading area height: 0.76 m Loading area length: 9.50 m Kingpin length: 4.00 m Internal width: 2.50 m Internal height: 3.24 m Weights: Technical total weight: 47,600 kg Axle loads: 4 x 7,400 kg Permissible fifth wheel load: 18,000 kg The semi-trailer was used in combination with a MAN TGX 26.480 6x2 tractor unit from 2015 with approximately 511,000 km. This tractor unit is also available. Sale as a complete combination is possible. Contact: Haverhoek Trucks B.V. Zweedsestraat 6 7418 BG Deventer Netherlands Tel. E-mail: Website: = Further information = Kedpfx Aaez H Tkwjmenc Suspension: Air suspension Front axle: Lift axle; Axle brand: BPW; Tire tread left: 80%; Tire tread right: 80% Middle axle 1: Tire tread left: 75%; Tire tread right: 75% Middle axle 2: Steered; Tire tread left: 75%; Tire tread right: 75% Rear axle: Steered; Tire tread left: 75%; Tire tread right: 75% Unladen weight: 9,800 kg Payload: 37,800 kg GVWR: 47,600 kg

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Knjdpezpzy Ujfx Aamsc Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: used, Year of construction: 1985, functionality: fully functional, Scheer DB5 line boring machine Knjdowv Uy Dopfx Aamjc - Year of manufacture: 1985 - 380 Volt - 21 spindles; 32 mm pitch - stop ruler - various dowel drills - portal clearance: 1056 mm - 2.2 kW Transport available at extra cost!

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Edgebanding, flush sawing, flush milling, chamfer milling, radius milling - Scraper, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm Ksdpfx Aaewv Uq Aomjnc - Connection port: 140 mm Ø - Workpiece width: min. 60 mm - Feed speed: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for coil material - WITHOUT pre-milling unit - Pneumatic cylinder new Shipping possible at additional cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) Knodpfx Ajzpzy Isamoc - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, HOLZ-HER EVOLUTION 7405 (2021) – Like New! Only 202 Working Hours HOLZ-HER EVOLUTION 7405 vertical CNC machining center for sale. Knodpfozutd Njx Aamec Excellent condition, barely used, fully operational under power. Quick Specs: - Year of manufacture: 2021 - Active milling hours (Vorschub aktiv): ONLY 202 hours! - Total machine uptime: 1,860 hours - Serial No: 1195/2-109 - Made in Austria (CE) Features & Software: - HOLZ-HER CAMPUS / HOPS active / Betternest - Vacuum-free automatic panel clamping system - Complete 4-side routing, drilling, and grooving - Compact vertical design (under 5 m² footprint)

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Kedszzfr Eopfx Aamenc Cutting depth: max. 60 mm Extraction: - Saw unit 120 mm - Lath grid 100 mm Workpiece support: - Sturdy plastic support for optimal stability, even for narrow workpieces. Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2003, machine/vehicle number: 694/0-302 (2003), functionality: fully functional, operating hours: 2,580 h, power: 12 kW (16.32 HP), workpiece height (max.): 48 mm, workpiece width (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 11 m/min, overall weight: 2,000 kg, Equipment: documentation/manual, Holzher Sprint 1417, Year 2003 Machine is fully controlled by PLC, almost all settings can be adjusted on the control panel, no defects, well-maintained machine used with expertise. Leuco Z3 jointing cutter installed, a second set of cutters is available, various indexable inserts are available. Maximum panel thickness approx. 48 mm, edge banding from 0.3 - 15 mm possible. Chain conveyor renewed approx. 10 years ago. Spray system for separating and cleaning agents, controlled by the application. -Jointing fence, motor-driven, program-controlled. -Jointing cutters 1961, 2 x 2.0 kW. -Gluing system, cartridge type 1906, with sensing nozzle (important), cartridge magazine for 4 cartridges, color change easily possible, PU also possible. -Pressure unit 1903 MOT, pressure of the first and other rollers can be adjusted separately. -Miter saws 1918, bevel cut adjustable. -Flush trimming 1823. -Radius trimming 1942 MOT (one axis motor-adjustable for 1 and 2 mm edges, selectable on the control panel). -Profile cutting blade 2 mm 1929, pneumatically timed. -Corner copying unit 1983, carbide tipped, with adjustment on the control panel, functional, but needs further fine-tuning. -Straight cutting blade 1964. -Swivel unit, controlled by the application. Includes all operating manuals, documentation of the operating points digitally and in printed form by Holzher technicians. A set of DIA jointing cutters is also included, as well as various indexable inserts for the cutting units. Return conveyor system ZHR 15 Boomerang, Year 1995 Knodez Dxh Nepfx Aamjc Mounted on the machine with connection to the pressure bridge. Easily adjustable from the front control panel, with a rotating device for parts. Adjusted to the feed rate, sensors still available from HOMAG. -Information without guarantee, the parties agree that the sale of the used machine takes place with complete exclusion of any warranty, guarantee and liability for defects. The buyer has inspected and tested the machine before purchase. -Sale only to commercial enterprises, machine is currently powered and in operation. Price is negotiable. Machine available after clarification in December / January 2027. Crane or forklift loading also possible from an external warehouse.

Condition: reconditioned (used), Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced Knedpszlbpzofx Aamjc - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Holz-Her 5-Axis Nesting Machining Center DYNESTIC 7535 LIFT ATTENTION: The machine is located in Sydney / Australia! Nesting with lifting table + labeling station + pusher conveyor, including a manual labeling station for small parts. Machining area: 3700 x 2200 mm. The milling spindle has a power of 13.0 kW / 18 HP (S6) and accepts tools with a maximum diameter of 350 mm via an HSK interface. Drilling with 24 spindles, 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head has an integrated sawing unit for a saw blade with a maximum diameter of 125 mm and a maximum width of 4 mm. 18-position tool changer, pneumatically liftable, with a cover to protect the HSK 63F collet, as well as a 1-position pick-up changer for saw blades with a maximum diameter of 350 mm. Knsdpsz Hvy Ijfx Aamjc Pneumatic stops, which can be recessed into the table, for special machining operations on the nesting table, or also with vacuum suction cups. 1000 m³/h vacuum capacity via VariAir pump (frequency-controlled). To be able to use the vacuum capacity in a concentrated manner, the table has a 16-zone vacuum system. Power Label above the lifting table for panels up to X=4200 x Y=2200 mm. Touch Label Light - extra label printer under the operator screen for labeling small parts. The pre-installed pusher unit is connected to the extraction system and can clean the panels and the nesting table. Overhead laser for complex contours (laser color green). Screen: 21.5'' / 16:9 touch screen Software: 1x Campus V7 (machine) + 1x Campus V7 (office), including high-speed curve and 5-axis simultaneous milling. Barcode scanner Touch Tool - tool length measurement Cold Gun - tool cooling Delivery, installation, and training for the machine can be carried out directly by us for an additional charge. The machine is currently located at our branch in Sydney / Australia. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: new, HOLZ-HER 7405 EVOLUTION CONNECT machining center -Exhibition machine- This offer includes an equipment package. The following items and options are already included in the price: - Material support - Height-adjustable infeed roller conveyor - Diamond edge trimming cutter set EVOLUTION - CAMPUS V8 EVOLUTION CAD/CAM software - Flat screen monitor, 21.5", 16:9 - Laser workpiece length measurement - Milling head 7830 - Tool changer 7887, 6-position magazine, pick-up - Vacuum system ECO - Air conditioning unit for control cabinet cooling - Tool changer 7874 - Angular gearbox 7869 - Adapter for Clamex cutter - Tool set - 4-axis CLAMEX - Tool holder HSK-F 63 - Drilling unit XL 7885, 19 spindles - Handheld control unit - Tool set - EVOLUTION for XL drilling head 7885 - New exhibition machine - Kjdpfezq Dbdjx Aamjnc

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Very well-maintained and robust Heesemann MFA 8 wide belt sanding machine for professional use. The machine is particularly suitable for surface, fine, and finish sanding and features electronic control as well as cross and longitudinal sanding units. The machine is in very good used condition. Technical data: Manufacturer: Heesemann Type: MFA 8 Year of manufacture: 1994 Machine number: 9411252 Working width: approx. 1,300 mm Cross belt: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Longitudinal sanding belt: 2,100 × 1,350 mm Voltage: 400 V Frequency: 50 Hz Total connected power: approx. 50 kW Rated current: 100 A Sanding belt dimensions: 4,800 × 150 mm Kedpezxyfhofx Aamenc Pressure pad belt: 4,450 × 140 mm Constant working height Electronic control Cross belt unit Longitudinal sanding unit Brush units Suitable for finish, fine and surface sanding Weight: approx. 4,000 kg Equipment: Electronic control panel Pneumatic unit adjustment Feed carpet Dust extraction connections CE marking Transport possible for an extra charge! The machine is currently still at the customer's site but would be immediately available! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: excellent (used), HOLZ-HER Auriga 1308 XL edge banding machine - used PC control with screen, Touchscreen, Swiveling control panel, Program memory, Automatic adjustment of pressure beams, Feed via transport chain, Workpiece support can be extended, Diamond flush trimming cutter in both forward and reverse rotation, Strip magazine, Standby function, Glu Jet cartridge system, Cartridge system with sensing nozzle, Use of PUR adhesives possible, Gluing unit with driven roller, Pneumatic control of the gluing unit, Miter saw with 2 high-frequency motors, Miter saw pneumatically swiveling, Flush/radius milling unit, Motorized positioning control for milling unit, Milling tools with diamond coating, Air nozzle on the milling unit, Corner copying unit with diamond-coated cutter, Radius draw blade with motorized positioning, Air nozzle on the radius draw blade, Process-controlled surface draw blade, Air nozzle on the surface draw blade, Spray device for release agents, Spray device for cleaning agents, Edge trimming unit ----- Technical data ----- Edge thickness, roll material: 3 mm, Edge thickness, strip material: 5 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Distance workpiece support: 480 mm, Support plate Ø for edge material: 800 mm, Cutting blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of flush trimming cutter: 0.8/1.2 kW, Power of miter saw: 2x0.45 kW, Power of milling station: 2x0.65 kW, Power of corner copying: 0.3 kW, Power of edge trimming: 2x0.09 kW, Extraction port Ø flush trimming unit: 2x80 mm, Extraction port Ø miter saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø draw blade unit: 120 mm, Compressed air connection: 6 bar, Overall length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - New heater - Cartridge system checked for leaks - Complete basic inspection Knedpfjy T D N Aex Aamsc - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate use

Condition: good (used), Year of construction: 1993, functionality: fully functional, Table milling machine TF900 - Year of manufacture: 1993 - 380 Volt - 3 speed settings - good condition Transport possible at additional cost! Knjdpfeygm D Usx Aamoc Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: used, Year of construction: 2019, Edge Control Numerical Control Panel height min - max mm 6 - 60 Pvc/Abs up to mm 3 Minimum panel length \ width mm 140 \ 60 Feed speed up to mt/min 10 / 25 continuously Working height electronically adjustable by C.N Lateral roller conveyor with idle wheels for panel support Rectifier unit with 2 motors Coil holder plate Gluing unit for EVA \ PUR glue with cartridge or granular system Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C Trimming unit with 2 motors Gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 multifunction motors (edger + rounder) with regulation by numerical control in automatic Edge scraping unit with electronic regulation from N.C. Glue scraper group Brush group Machine length mm 6500 approx Weight Kg 2750 approx Ksdpfx Aaowwhn Demsnc

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Condition: Overhauled by a Holz-Her specialist Features and Technical Specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - FG 201 jointing unit with 2 milling heads, including 70 x 48 x 30 mm Z 2 diameter cutters - Edge feeder 1903, single-feed, automatic transport of roll and strip stock - Glu Jet GJ 301 gluing system with automatic glue height adjustment (probing nozzle) - With magazine for glue cartridges - Pneumatic pressure unit 1912-3; first roll driven with pneumatic immersion control - Trimming unit 1918, pneumatically swiveling 0–10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package, including dia. cutters - Profile milling unit 1832 for corner copying with radius cutters - Scraper unit 1929 MOT 2 - Chip collection box - Surface scraper FK 701 - Polishing unit 1940 - New main heater - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6–60 - Edge thickness (mm) 0.4–6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Kjdpozk N U Aefx Aamenc Availability: available immediately Location: 63934 Röllbach

Condition: used, Holz Her Sprint 1321, with edge banding and PU adhesive application Heavy-duty version – edge thickness 0.4 – 15 mm Ksdpfx Ajzp Hc Ueamsnc SPS-based Edgecontrol control panel Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Fully automatic edge magazine for roll and strip material Gluing unit with cartridge system + PU adhesive application Automatic glue height adjustment / touch probe nozzle Pressure unit 1913, pneumatic Trimming unit for roll and strip material 1918 – 15 mm With pneumatic adjustment for trimming saw angle from 0-10° Multi-function milling unit with motorized adjustment: flush trimming – 15 mm, radius and chamfer milling – 15° Profile milling unit – corner rounding 1833 Scraping unit for chamfers and radii 1929, pneumatic Pneumatic infeed and outfeed Surface scraping unit – finishing, pneumatic Buffing unit for finishing and edge polishing with 2 textile discs HIGH-END spraying system Complete set of tooling Machine is in FULLY OPERATIONAL CONDITION Machine from a craft business / consignment sale Available from stock in Lieboch, NET € 21,500.00

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam Knjdpfxezx Enns Aamoc PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 2017, Direct Numerical Control NC HOPS with Campus software Working range in X axis mm 3400 Working field in Y axis mm 1600 Working field in Z mm 300 Worktop with 6 adjustable bars No. 3 suction cups each work bar for holding the piece being processed N° 1 5-axis electrospindle, 10 KW, with automatic tool change, Hsk F63 type cones Boring head with 24 spindles as follows: N. 12 Y-axis vertical spindles N. 6 X-axis vertical spindles N. 4 horizontal spindles Y axis N. 2 X-axis horizontal spindles Automatic tool change system with 18 positions - positioned on the back of the machine Frontal protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the switchboard No. 1 vacuum pump Knsdpfxowwiybo Aamec

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, This vertical machining center, including the "Clamex unit," is for sale and has seen only a few hours of operation. The machine is being sold because we have switched to a nesting machine. In 2021, the machine was upgraded with a more powerful vacuum pump (16.3 m³). The machine also includes various vacuum clamps; we purchased several larger plates in addition to the standard equipment. Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 1200 mm (= max. opening) Material thickness: Z = 8 to 70 mm Max. contour milling dimension in X-direction without clamping: X = 1500 mm Max. contour milling dimension in Y-direction: Y = 985 mm, less milling cutter radius Max. drilling dimension horizontally in X-direction: H = 1168 mm Z-axis stroke: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Milling spindle 7830, power: 7.5 kW (S6), air-cooled with HSK-F 63 tool holder n(max.) = 1000 - 24,000 min-1, continuously adjustable with collet chuck with HSK shank, ceramic ball bearing (hybrid bearing), tool weight max. 6 kg (incl. holder) Tools: max. Ø 110 mm, tool length max. 80 mm Tool changer 7887, 6-position magazine - pick-up system, pneumatic, max. Ø tool: Ø 110 mm Maximum tool weight: Knsdpfjz In Ugox Aamec > 5 kg per tool or 30 kg when fully loaded Can be equipped with collet chuck with HSK shank Tool changer 7874, 1-position aggregate magazine, swiveling in X and Y directions, only for special bevel gear 7869 with HSK holder Vertical spindles can be activated individually Arrangement in L-shape, 5 in X and 4(5) in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Direction of rotation: alternating right/left n(max.) 1000 - 4400 min-1, continuously adjustable Holder: M 10 thread - parallel seat 11 mm without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction 1 double drilling spindle in Y-direction Holder: M 10 thread, parallel seat 11 mm Total drill length max. 63 mm from mounting end without tool, without holder Sawing unit Integrated sawing unit for sawing/grooving in X-direction n(max.) 1000 - 5650 min-1, continuously adjustable Tool holder: A max Ø = 120 mm, I Ø = 20 mm, B = max. 4.0 mm 4-axis “CLAMEX” tool set - Incl. original tool set consisting of 2 pcs. P-system slot milling cutter, DP (diamond) 100.4x7x30mm, Z3, NLA 4/6,6/48mm 1 pc. Milling arbor for P-system slot milling cutter S20x50mm, d=30, L=102, DTK 48mm 1 pc. Milling arbor for P-system slot milling cutter S16x55mm, d=30, L=68, DTK 48mm 1 pc. CNC drill 6mm for Clamex P, L= 57.5 / shank 10x27 / left 1 pc. Adapter for drill with shank d= 10 mm (left) 1 pc. Collet DIN 6388 form B, double slit, size 25 Clamping diameter 20, for HSK-F 63 holders

Condition: like new (used), Year of construction: 2021, functionality: fully functional, workpiece length (max.): 4,600 mm, workpiece width (max.): 2,200 mm, workpiece height (max.): 250 mm, Equipment: rotational speed infinitely variable, Holz-Her 5-Axis CNC Nesting Machining Center DYNESTIC 7535 Working area: 4600 x 2200 mm. Vector speed is 128.0 m/min. The milling spindle has a power output of 13.0 kW (S6) and accommodates tools with a maximum diameter of 350 mm via HSK interface. Drilling unit with 24 spindles – 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head is equipped with an integrated saw unit for blades with a maximum diameter of 125 mm and a maximum width of 4 mm. 18-position disc tool changer, pneumatically liftable and covered to protect the HSK 63F holders, as well as a single-position pick-up changer for saw blades up to 350 mm in diameter. Pneumatically retractable stops in the table for special machining either on the nesting table or using vacuum pods. Knodpfx Ajx E Ah Ioamoc Vacuum capacity of 750 m³/h, distributed across 2 pumps with 500 m³/h and 250 m³/h respectively, intelligently controlled by ECO-VAC software. To optimize vacuum efficiency, the table features a 16-zone vacuum system. The pre-installed pusher unit is connected to the extraction system and can be used for panel cleaning and/or clearing the nesting table. Delivery, installation, and machine commissioning training available directly through us at additional cost. The machine is currently located at our shipping warehouse in Gratwein, Austria. In case of discrepancies between the German version and any foreign language version, the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 2015, functionality: fully functional, workpiece height (max.): 60 mm, total length: 7,920 mm, warranty duration: 3 months, HOLZ-HER Edge Banding Machine ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Easy program changes and tool adjustments via the 18.5" touch control panel. Short heating time of the GlueJet adhesive system, approximately 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR glue and cleaning the system is extremely simple and can be done in just a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special features for materials with protective foil, such as high-gloss and supermatt surfaces! Knsdpfx Aaox Emf Demjc One of the absolute highlights of this machine is the multifunction package, which excels in operations with many different edge types. The DIA tools are multi-stage and can switch between radii and bevels as the situation demands – from the longitudinal milling unit to corner copying and profile scraper. The extendable workpiece support and extended infeed section help with large workpieces, and a guiding system assists in feeding small workpieces into the machine. Edge thickness (coil material): 0.4 – 3 mm (depending on material) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet, suitable for both EVA and PUR adhesives, with minimal effort. Handles all popular edge types, including high-gloss & supermatt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue amount control Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunction units for quick setup of radius, flush, bevel Vertical & horizontal spray units and much more. Delivery, installation, and machine commissioning can be arranged directly through us at an additional cost. The machine is currently located in our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, only the German version is binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.