Used Grimar Shear, Capacity 3000X6Mm for sale (32,719)

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Gjdpfx Aoz Izmcjivjuh Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Condition: used, Max. stamping capacity: 800 kN Gedpjxf E U Ujfx Aivouh Max. thrust: 1100 kN Punches 27 mm holes in 20 mm steel Shears on the flat steel shear to 500 mm up to material thickness of 18 mm steel Further technical data on request With a range of stamps and matrices

Condition: good (used), Year of construction: 1990, Used plate shear from Haco Type TS 3006 Capacity 3100 x 6 mm Gusdpfx Aioz Il Ideveh Adjustable back gauge and cutting angle Manually adjustable shear gap

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, actuation type: hydraulic, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, sheet thickness (max.): 13 mm, back gauge: 1,000 mm, power: 18.5 kW (25.15 HP), overall weight: 17,000 kg, Equipment: CE marking, documentation/manual, finger protection, foot remote control, type plate available, Hydraulic shear LVD HST-C 40/13 Year of manufacture: 1995 Serial number: 22764 Technical specifications: Max. sheet thickness: 13 mm Cutting length: 4050 mm Back gauge range: 1000 mm Cutting angle: 0.5° - 2° Blade clearance: 0.1 - 2.2 mm Number of strokes per minute: 7 - 28 Number of holding points: 21 Motor: 18.5 kW Weight: 17000 kg Godpfx Aiez D Dnboveuh Oil capacity: 300 l Voltage: 3 x 380 V Included options: Safety standards: CE 1 square arm support, length 1500 mm 2 additional supports, length 1500 mm

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cutting thickness 4 mm Back gauge 900 mm, accuracy +/- 0.5 mm Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting - 17 Hydraulic sheet hold-down device Godpfx Aieumpq Neveuh - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm - 2 material support arms 615 mm - Electric foot switch - Fixed finger guard in front of the hold-down devices Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Condition: used, functionality: fully functional, Used guillotine shear from Donewell Gusdpfx Aoy Nycqoivoh Model: 2500 3 Steel capacity: 2500 x 3 mm Electric backgauge Adjustable cutting angle

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 3-meter plate shear from Haco Atlantic Type: ATS 3006 Capacity: 3100 x 6 mm Electric back gauge Electric cutting angle adjustment Guedjzi Rl Tjpfx Aivsh Year of manufacture: 1987

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used small hydraulic plate shear from OMAG Gujdpfx Aiezk Akdjveh Type: CEL 104 Capacity: 1050 x 4 mm Electric back gauge Year of manufacture: 1987

Condition: good (used), Year of construction: 1987, Used OMAG plate shear Type CEL 104 Godpszz Ru Esfx Aivouh Capacity 1100 x 4 mm

Condition: good (used), functionality: fully functional, Year of construction: 1988, Used guillotine shear from Jorg Type: 4052 Gusdpfx Aieyu H Rdevjh Capacity: 1300 x 4 mm Electric back gauge Year of manufacture: 1988

Condition: used, A used well preserved guillotine shear Vöest Alpine Godspgmpdopfx Aivouh cutting length: 2010 mm cutting capacity in steel up to 370N/mm² tensile strength: 5 mm strokes per minute: 50 H/min Hold down pressure: 30 bar number of hold-downs: 8 pcs. backgauge manually adjustable: 950 mm throat depth: 150mm dimensions: LxWxH 280x190x140cm weight: 2500 kg

Condition: used, Year of construction: 2025, cutting capacity 2.0 mm throat 700 / 280 mm round blank diameter max. 1000 mm round blank diameter min. 120 mm speed 7.0 m/min total power requirement 1.10 kW weight of the machine ca. 360 kg range L-W-H 1400 x 400 x 1150 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven circular shears with large projection - with hardened blades Godjxaa Tujpfx Aivsuh - machine base - manual setting of the desired round diameter - manual material clamping - electric motor brake - 1x freely movable foot switch * including emergency stop button

Condition: ready for operation (used), functionality: fully functional, Guillotine Shear – Mechanical Model: HSM-F 15/3.0 Machine No.: 11644-0995 Year of manufacture: 1995 Condition: Good, operational condition TECHNICAL DATA Cutting capacity: 1,550 x 3.0 mm Cutting angle: 2° Number of cuts per minute: 35 Motor power: 3 kW with brake, 380 V/50 Hz Manual backgauge: 0-500 mm Weight: 1,255 kg EQUIPMENT/ACCESSORIES Guedpsydk Acjfx Aiveh  Angle stop with ruler  Double-edged blades  Foot switch  Documentation

Condition: used, LVD Shear Gusdsx Tqtbepfx Aivsh Type HST C-10/31 Capacity 3000 x 10

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used 4-meter Safan guillotine shear Type: VS 430 3 Gjdpfx Ajyu Ig Heivjuh Capacity: 4300 x 3 mm Electric back gauge Output stacking system with stacker and high support table Year of manufacture: 1990

Condition: good (used), Year of construction: 1998, Well-maintained, used plate shear from Safan. Type: HVR 430 6 Capacity: 4300 x 6 mm More photos will be available soon. Gujdpfxezz Rx Dj Aiveh

Condition: good (used), Year of construction: 1995, For sale is a good used guillotine shear from LVD. This machine was produced in Germany in 1995. guillotine shear LVD HST - C 40/6 Manufacturer: LVD Type: HST - C 40/6 Cutting capacity in steel 6,35 mm Guedpfjzty E Dsx Aivsh Maximum length 4050 mm Cutting angle 0.5 to 2 ° Cadence 10 to 45 strokes / min 7.5 kW motor Weight 9500 kg

Condition: used, round bar steel 33 mm square edge steel 30 mm L-beam 60 x 8 mm hole diameter in sheet thickness 20 in 13 mm hole punhing press: pressure 35 t hole punching press: throat 320 mm hole punching press: max. length of stroke 24 mm Guedpfx Aijx Hp Ahevsh hole punching press: capacity (dia. x thick.) 30 x 9 mm hole punching press: capacity (dia. x thick.) 20 x 13 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m Profile steel shear with: - Hole punch - Notcher - Foot switch - Machine light - Mounted on a trolley

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used Safan guillotine shear with discharge unit Type VS 430 3 Capacity: 4300 x 3 mm Electrically adjustable back gauge Manually adjustable cutting angle and blade gap Gsdpfjyzgdrox Aivouh Equipped with lift/discharge device at the rear

Condition: good (used), Year of construction: 1993, Used Darley guillotine shear Gujdpfoyzf Snox Aivoh Type VS 6008 Capacity 6050 x 8 mm Machine fully operational, frame needs to be welded (see last photo)

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. Gujdpfsu Icmhox Aivjh *

Condition: used, functionality: fully functional, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, type of input current: three-phase, overall weight: 4,500 kg, HACO 3000x6mm hydraulic guillotine shear TS-3006 Brand: HACO Model: TS-3006 Gujdpfewx Ix Sjx Aivsh Power: Three-phase 380V Cutting length: 3,050 mm Cutting thickness: 6 mm Type: Vertical cut, motorized blade angle adjustment (0.5 to 3º) Back gauge: 750 mm (motorized with manual handwheel for fine adjustment) Manual blade gap adjustment via lever at the rear Weight: 4,500 kg Motor: 7.5 kW

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, MORGAN RUSHWORTH GUILLOTINE MODEL HSGS 3100 X 6 MM CNC CONTROL - CYBELEC CYBTOUCH 6 YEAR 2016 Guodpfoz Ehtwox Aivjh FRONT AND REAR GUARDS SQUARING ARM FRONT SUPPORTS BLADES EXCELLENT BLADE GAP IN EXCELLENT CONDITION , ONLY USED ON LIGHT MATERIAL SINCE NEW CAN BE VIEWED AT OUR WORKS OR A VIDEO CAN BE SENT

Condition: used, functionality: fully functional, Year of construction: 2000, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Sold by: Casanova Three-phase 380V Year: 2000 Type: Vertical cutting (blade inclination) Cutting length: 3050 mm Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Squaring arm: 1000 mm Back gauge: 750 mm Gedpfxoxgdlns Aiveuh Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg

Condition: used, Year of construction: 2003, Technical details: throat: 625 mm number of strokes: 34 Hub/min Punching capacity: 95 t stroke: 80 mm flat steel: 480 x 15 / 380 x 20 mm U-H profile: 160 x 90 knife length: 483 mm total power requirement: 7,5 kW weight of the machine ca.: 2,7 t dimension machine xH: 1,4 x 0,8 x 1,8 m hydraulische section steel shear shearing station: -shearing max. 380 x 20mm / 480 x 15mm -shear cutting max. 120 x 15mm -holder adjustable in length to 750mm -knife cutting edges = upper knife 2-fold and lower knife 4-fold profile station: processing of round and square profiles; U-profiles; double T-beams and unequal angles -angle shearing max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -Profile cutting max. round steel = Ø 50mm; U-H profile = 160 x 90mm; T-profile = 120 x 12mm. Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Operation by foot switch Some accessories available. Gusdpou Icl Rsfx Aivjh *