Used Fliegl Dhka 390 24,5 M³ for sale (70,141)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,480 mm, total length: 13,200 mm, total width: 2,550 mm, total height: 2,645 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to individual customer requirements. Chassis, Fifth Wheel, and Transport Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, mounting position for warning signs at the rear, outer frame with "Load-Lock profile" for lashing straps, 24-ton capacity, two-speed landing gear, single-sided operation, lashing eyes, yellow marked, 2 of which are located at the rear as towing eyes, container locking: 4 pairs of container locking mechanisms embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, pocket recesses embedded in the outer frame, 80 x 80 mm internal dimensions, pocket recesses embedded in the center of the floor, 80 x 80 mm internal dimensions, plug-in crossbars B=80/ D=80/ L=1200 mm, hot-dip galvanized, lashing eyelets embedded in the outer frame, 5 tons each, 2 storage boxes b= approx. 1230 / h= approx. 450 mm, closed and mounted across the entire width in front of the axles, replacing side impact protection, front locking mechanism can be inserted as a pin, lashing/crossbar rails embedded transversely in the floor across the entire width to the outer frame, approx. 100 mm high, with 20 mm round steel rails, top and bottom, distance from top to bottom approx. 60 mm (of the round steel), with angle sheet at the bottom as a closure, open halfway downwards for lashing and inserting crossbars 80 x 80 mm, storage compartment for warning signs, open, as technically possible. Fodpfozb Iu Dsx Afkjph Axles and Suspension SAF disc brake axles, "axles/chassis laser-measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brake", 2 driving heights, can be switched over via hand knob: 1 x for saddle height 1120 mm 1 x for saddle height 1200 mm Braking System 2-line compressed air braking system, color-coded lines for easy maintenance, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, EBS, electronic braking system with EBS socket at the front, with lifting and lowering valve, vehicle - driving stability system Wheels and Tires 385/65 R 22.5", steel rims, factory silver Electrical System 24 Volt, 4 x 3-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable Rotating beacon with holder, switched via parking light (light can be removed) 2 pairs of warning signs double LED illuminated, extendable to 4500 mm and removable with plug. With additional holder at the rear Additional 7-pin socket (according to ISO 1724) in the underride guard at the rear Floor Sieve-printed panels approx. 30 mm thick, transverse impact protection with omega inserts, on longitudinal cross members for high point load capacity for forklift axle load up to max. 7100 kg Front Wall / Front Corner Posts 25 mm aluminum hollow profile, 1650 mm high, corner posts steel in volume design Front wall additionally covered with 1250 mm high sieve-printed panel on the inside "Crash blocker", at the bottom inside at approx. 140 mm height with steel ram protection Storage compartment for plug-in crossbars 80 x 80 on the inside of the front wall Painting Frame: Hot-dip galvanized including passivation or pa

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34202036640, empty load weight: 6,213 kg, maximum load weight: 35,787 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, The images shown are archive photos; the vehicle may still be in use! Approx. fifth wheel height: 1200 mm Chassis: Semi-trailer tipper Basic lightweight construction, kingpin plate with interchangeable 2" kingpin, patented curved front bulkhead Folding underrun protection, underrun protection with spring assistance for easier handling Integrated mudguard bracket with stone-repellent surface Axles & Suspension: SAF disc brake axles with 430 mm disc diameter; axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle including forced lowering and starting aid, activation by "3x braking" (starting aid is functional up to a 30% axle overload and up to a maximum speed of 25 km/h) Braking system: 24 Volt EBS electronic braking system with EBS socket at the front (no connection cable), test port for brake cylinder pressure routed to the outside of the EBS module, with raise & lower valve Paver brake, electrically operated from the truck without truck installation, automatic tipper lowering with shut-off valve "TPMS" tire pressure monitoring system as per ECE R141, display via monitor in towing vehicle through EBS (requires appropriate truck setup; only for standard tires) Axle load detection via EBS-CAN bus signal for display in the cab; truck must be preconfigured, no truck installation Wheels and Tires: 385/65 R22.5 steel rims Electrics: Side-mounted yellow LED lights synchronised with indicators (flashing side lights) 2 white front position LED lights 2 white/red rear marker LED lights Fpsdsyylapjpfx Afkjh LED work lights on both sides; 2 additional work lights integrated into the rear Hydraulics: Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO (power take-off) Body/Tub: Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Internal ladder at the front bulkhead Greenline - conical and aerodynamic body shape “Membrane” tailgate Tailgate as hydraulic rear door opening upwards; clearance approx. 2,200 mm Side walls continuously 5 mm thick, base continuously 8 mm thick Body is insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom, and rear with Fliegl Isotherm "Flip Top sliding cover", automatic rear lock as folding hoop. Cover built to front. Electrically operated cover with 7-pin plug (charging plug) at front, no connection cable, no truck installation; operation on trailer and via remote control. Operational notes: For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and corrosion from the material. The specified gross weight is technically possible, but depending on the load, the gross weight may not be achievable while observing permissible axle, support, and coupling loads. (Improper load distribution may lead to poor driving and tracking performance) Paintwork: Frame: DB 7350 Nova Grey "10 years warranty against corrosion" Support legs: black coated Body: RAL 1007 Narcissus Yellow Roll tarp: RAL 7038 Agate Grey

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 R22,5", Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis, Saddle, and Transport Company Fine-grained steel welded construction in lightweight design, saddle plate with 2 interchangeable kingpins, main frame reinforcement for 25 tons in the center of gravity at a loading length of 3 m in the retracted state. 13 pairs of hooks for tie-down strap attachment welded onto the cross members. 23 pairs of lashing eyes recessed in the outer frame, each rated at 3.5 tons. Outer frame with Load-Lock profile for tie-down strap attachment. Note: Not usable with sideboards! 24 tons, 2-speed support leg in reinforced design for loaded docking, single-sided operation. Fpodpfxoi Ri Sze Afkeh Chocks with holder. Aluminum side impact protection. Underrun protection. Semi-fender mudguards. with anti-spray flaps according to EC standards. 1 spare wheel holder for 1 wheel, with wheel fastening kit. 1 closed stake pocket box, open at the top, below the loading platform, doors on both sides, w=450 mm/H=400/420 mm/d=2460 mm. 6 pairs of extendable stake pockets for square tube stanchions 80x80 mm, extendable from loading width of 2000 mm to 3100 mm. 4 pairs of stake pockets recessed in the outer frame, for square tube stanchions 80x80 mm. 11 stake pockets recessed in the middle of the floor, for square tube stanchions 80x80 mm, with reinforcing beam, installed between the outer stake pockets. 5 x 3 pairs of stake pockets recessed on the outside of the longitudinal beams, for square tube stanchions 80x80 mm, including reinforcing beams – for load securing to the front and rear for the transport of construction steel mesh 2x5000 mm or 2x 6000 mm. 6 lightweight plug-in stanchions, B=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with rope guide at the top for strap tensioning. 12 lightweight plug-in stanchions, B=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded on at the bottom on both sides. Note: Stake pockets/plug-in stanchions are not designed for the sole securing of long materials, pipes, etc. without wrapping. 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. (Lock not included) 6 construction steel winches with wire rope and swivel hook, with rope passage through the outer frame, 1 removable attachment gearbox for construction steel winch – supplied separately. Telescoping Main frame telescopic extendable by max. 4,000 mm and lockable approximately every 500 mm. Locking with pneumatic pin locking + display of frame locking on both sides, operated via a hand knob, control for brake/locking and suspension on the left front above the axles. Storage compartment between the longitudinal beams in the extended state. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Last axle with trailing arm steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via a hand knob, as well as manually via a switch in the towing vehicle (Pin 10), without truck installation. Axle spacing offset mm Air suspension 1st axle automatic lift axle, additionally electrically operated from the truck, with start-up aid. Braking system 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front. EBS manufa

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014232, empty load weight: 5,900 kg, maximum load weight: 29,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2025, loading space length: 13,650 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,638 mm, suspension: air, tire size: 235/75 R17,5", color: silver, The images are archive images! The vehicle may be in use! Chassis: Semi-trailer for transport companies Fine-grain steel welded construction, kingpin plate with interchangeable 2" kingpin Fpedpfxsxb D Swe Afkeh Suitable for transporting construction/agricultural machinery up to a maximum gross weight of 24,000 kg and with a maximum width of 2,480 mm (however, the track width of the construction/agricultural machinery or vehicles to be transported must not exceed 2,200 mm). Mounting rail for aluminum ramps at the rear (wider construction/agricultural machinery must not be loaded). Outer frame slightly angled, new design with "Load-Lock" profile for securing lashing straps. 14 pairs of lashing points recessed into the outer frame, 2.5 tons each. 6 pairs of lashing points recessed into the outer frame, 5 tons each. 24-ton, 2-speed support jacks, single-sided operation, with straight lower part, without thrust compensation. Free support foot angle or free swivel radius to the rear approx. 1920 mm. Foldable rear support. 2 x chock blocks with holder. Aluminum side impact protection. Steel underride protection. Quarter panel fenders in front of and behind each axle. With anti-splash flaps behind each axle. 1 x spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 x spare wheel, same manufacturer as the standard tires, steel rim. Axles + Suspension SAF drum brake axles. "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption. Air suspension. 1st axle: automatic lift axle, additionally electrically operated from the truck, including forced lowering and start-up assist, without truck installation (the start-up assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Braking System 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front, without connecting line. 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve. Vehicle - Driving Stability System. "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle's display, via EBS, without truck installation (this requires the truck to have the necessary capabilities. Only for standard tires). Wheels and Tires 235/75 R17.5 twin tires. Steel rims, factory silver. Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. Yellow LED lighting on the sides linked to the turn signal ("flashing side marker lights"). 2 white position lights at the front in LED. 2 white/red outline lights at the rear. 2 x 7-pole fail-safe sockets at the front, without connecting cable. Floor Sieve plate, approx. 30 mm thick, for high point load capacity for forklift axle loads up to a maximum of 5,600 kg. Front Wall / Corner Posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a robust design. Front wall additionally covered with sieve plate, 1250 mm high. Frame hot-dip galvanized. The images are archive images! The vehicle may be in use!

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902028859, empty load weight: 5,660 kg, maximum load weight: 29,340 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,700 mm, total width: 2,550 mm, total height: 3,700 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, Chassis, Semi-trailer, Transport Company Steel welded construction in reinforced design, only 2 longitudinal members as double T-beams with steel/diamond-plate between the longitudinal members, kingpin plate with replaceable 2" kingpin. Mudguard for tail lights. 8 pairs of lashing eyes screwed or welded to the frame, at the manufacturer's discretion. 24 tons, 2-speed support legs, single-sided operation, with straight lower part, without thrust compensation. Chocks with holder. Aluminum side impact protection. Galvanized steel underrun protection. Fpodpfx Afeza Anvoksh Half-shell fenders with anti-spray flaps according to EC. 1 spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 storage box recessed between the longitudinal members. 8 pieces of wood rack supports, at the manufacturer's discretion, screwed to the frame, each with 2 extendable wood racks from 1800 to 2800 mm, 7 tons per pair. Axles + Suspension BPW disc brake axles with 430 mm disc diameter. Air suspension with lift and lower valve, safety cable on the axles. 1st axle automatic lift axle, including forced lowering and starting aid, operated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Axle spacing staggered 1410/1310 mm (combined transport) up to 44 tons total weight. Wheels and Tires 385 / 65 R 22.5" at the manufacturer's discretion. Steel rims, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. Axle load recognition via EBS-CAN bus signal, for display on the dashboard in the cab; the truck must be correspondingly prepared, no truck installation (no calibrated scale). 2 non-interchangeable coupling heads at the front, without connecting cable. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! "Safe Parking" Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Front wall / corner posts Steel / grid front wall, approx. 2300 mm high, screwed to the frame. Approval / Signs Country of approval: Germany. Type approval according to EC 2007/46. Prepared for single-row license plate holder. Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Warning sign according to ECE - 70. Paint Frame: DB 7350 Novagrau (dark grey) Support legs: Black coated. Front wall: Hot-dip galvanized.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902029968, empty load weight: 6,100 kg, maximum load weight: 28,900 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, suspension: air, tire size: 435/50 R19,5", The pictures are archive pictures, the vehicle may still be in use! Fpjdpfx Aewk Dckofkoh Equipment on request!

Condition: new, machine/vehicle number: 8e6cf81e11b107f23f22f209a, axle configuration: 3 axles, tire size: 435/50 r19.5, Further information Fine-grained steel welded construction, with preload slight pretension in the neck area, saddle plate with replaceable 2 , kingpin, outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment, 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm, pull-out ladder at the rear, lateral door stop, 2 wheel chocks with holder, aluminium side collision protection, galvanized steel underride guard, quarter-shell mudguards in front of 1st axle and behind each axle, with anti-spray flaps according to EC, impact protection at the rear SAF disc brake axles, laser-measured axle/chassis to reduce tire wear and fuel consumption, air suspension 2-line compressed air brake system, colored cable routing for easy servicing, spring-loaded parking brake, 2 swap-proof coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS, with lift & lower valve, vehicle stability system 435/50 R19.5 tires of the manufacturer's choice, steel rims, factory silver Fodpfx Aoi Ri E Hjfkeph 24 volt, multi-chamber lights, amber LED lighting at the sides, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor: Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front bulkhead / corner stanchions: 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions: 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and a long pocket at the bottom, 3 pairs of stanchion positions Insertion slats: 5 rows of wooden insertion slats Rear wall / rear corner stanchions: Rear steel corner stanchions up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin: Tarpaulin with welded-in horizontal and vertical straps, stainless steel tensioning fasteners Roof: Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for car industry, internal width between the roof rails, approx. 2 490 mm, tarpaulin color: white, 400 Roof non-elastic, hardly any deflection of the roof rail when loading and unloading, optimum rain strip at the rear, at the top of the end bows, above the doors, EcoLift - lifting roof can be raised by approx. 380 mm, with gas pressure damper support, 3 driving positions at the front: interior height at the front approx. 2900 mm/ 2950 mm / 3000 mm, adjusted to approx. 3000 mm Germany, test approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural strength according to EN 12642 XL, prepared for single-line license plate holder, warning sign according to ECE - 70, reflective strips: white, continuous on the side tarpaulin at the bottom and at the top in the corners (if visible drop sides, then the strip at the bottom, on

Condition: new, machine/vehicle number: 068983c41e44eb5660fa9100c, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 435/50 r19,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, with preload slight pre-tensioning in the neck area, saddle plate with replaceable 2 kingpins X-tra Long, with 15030 mm internal length Outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm Extension ladder at the rear Door retainer at the side 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Quarter-shell mudguards in front of 1st axle and behind each axle Impact protection at the rear Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting cable Fjdpfx Aoi Riwuefkeph EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system AAC Basic, automatic relief axle acting on last axle, as maneuvering aid, up to 20 km/h, can be switched off manually Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 435/50 R19.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side Side amber LED lighting coupled with the blinker Flashing side lights Side lights 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall / front corner stanchions 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions 3 pairs of sliding stanchions can be moved along the entire length, with 4-fold pockets and with long pocket at the bottom. 3 pairs of stanchion positions Insertion slats 5 rows of wooden slats Rear wall / rear corner stanchions Rear corner stanchions steel up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Stainless steel tension locks Roof Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof rail when loading and unloading EcoLift - lifting roof can be raised by approx. 380 mm, on both sides, with gas pressure damper support, 3 driving positions at the front: Front interior height approx. 2900 mm / 2950 mm / 3000 mm, adjusted to approx. 3000 mm Optimum rain strip at the rear, at the top of the end bows,

Condition: new, machine/vehicle number: 824d4741dc933a94e9a7a7a8c, empty load weight: 5,600 kg, maximum load weight: 29,400 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Telescopic support in the middle, unhitching with load not possible, when unhitched the vehicle must be at an angle to the rear. Wheel chocks with holder Underride guard, foldable Half-shell mudguards Integrated mudguard holder Surface stone-repellent Splash guard behind last axle in asphalt version, attached to mudguard with hinge, with attachment option on top of mudguard, shortened mudguard Tow hook at the rear Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Fjdpfxsi Rix Sj Afkoph Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw socket, fixed part, NW 48 mm (without hose connection) Hydraulic actuation via truck power take-off Troughs Round steel body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic en with access to front wall. Membrane rear wall Rear wall as pendulum flap, resting on the outside with 2-fold hook locking. 2 clamping screws with toggle fasteners at the bottom side. Side walls 4 mm thick throughout, base 4/5 mm thick, wear and weight-optimized design, Insulated body, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom and rear with Fliegl Isotherm. BASIC cover, tarpaulin cladding Standing platform with access, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles according to RS 10 - 2013 Prepared for single-line license plate holder Contour marker

Condition: new, machine/vehicle number: d9c951d746f03c05bc5470f89, empty load weight: 5 kg, maximum load weight: 29,045 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis saddle forwarding Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Vario stanchion system 4 pairs embedded in loading area, can be pushed together to 2 100 mm and extended to approx. 3 500 mm for loading. Stanchions can be locked every 100 mm on an internal width of 2 100 mm to 3 000 mm, 4 pairs of divisible stanchions 600 mm + 1 200 mm, total height 1 800 mm removable. With an internal stanchion width from approx. 2 350 mm, excess width. Vario end walls Floor prepared for inserting 3 end walls. 4 x 5 pairs of Vario stanchion pockets for insertable end walls (front and rear) and 1 x 3 pairs in the middle for transporting 2 x 5,000 mm or 2 x 6,000 mm construction steel mats. 2 Vario end walls, each consisting of 1 pair of plug-in stanchions and 1 top crossbeam approx. 2200 mm wide. Cross beams can be extended by 220 mm on both sides, with lashing hole for tensioning. 1900 mm high Vario bulkhead, can be converted to 1300 mm or 700 mm high. 4 stanchion pockets embedded in the center of the floor for 80 x 80 mm stanchions 1 pair of supports at the bottom for Vario bulkhead at the front 1 pair of lower supports for rear Vario bulkhead Slightly slanted outer frame with Load-Lock profile for lashing strap attachment 14 pairs of lashing eyes additionally embedded in the outer frame, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Extension ladder at the rear Wheel chocks with holder Aluminium side collision protection Galvanized steel underride guard Quarter-shell mudguards in front of and behind axle unit with anti-spray flaps on last axle only Impact protection at the rear 8 construction steel winches with wire rope and counter hooks, 4 x left and 4 x right with rope feed-through through the outer frame, 1 removable slip-on gearbox for construction steel winches - supplied loose (without bracket on the frame) 1 spare wheel holder for 1 e-wheel, with wheel fastening set Fpedpfx Afsi Ri R Dekjh 1 plastic toolbox, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 1 closed stanchion stowage box, open at the top, below loading area, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm 4 lashing/stanchion rails embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel slats, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). For lashing and inserting stanchions 80 x 80 mm. Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle lift below the recomm. Driving height, therefore no warranty for tire damage Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be to

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902026582, empty load weight: 6,500 kg, maximum load weight: 28,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2020, tire size: 445/45 r19,5, Further information The images are archive photos, the vehicle may still be in operation! Chassis - Semi-Trailer for Freight Forwarding Fine-grain steel welded construction, with preload (slight tension) in the neck area, fifth wheel plate with interchangeable 2'' kingpin PRO SLIDE, additional sliding plate at the front to protect during coupling Outer frame slightly angled with load-lock profile for attaching lashing straps Note: To hook in the straps in conjunction with sideboards, the sideboards must be opened! 24 t two-speed landing gear, single-side operation, with semi-circular lower part and straight mounting plate, with push compensation Note: Free landing gear foot spacing or free rear swing radius approximately 1930 mm 1 pair rear gearbox landing feet, with straight lower part and single-sided operation on the right in direction of travel Telescoping ladder at the rear Side door retainers Wheel chocks with holders Aluminium side impact protection Galvanized steel underrun protection Quarter-shell mudguards in front of the first axle and behind each axle With anti-spray mud flaps behind each axle Heavy Blocker rear cross underrun protection + side roller bumpers Heavy-duty pallet stops, bolted on both sides, approx. 15-20 mm high, with lashing points every 200 mm, loading height reduced by approx. 15-20 mm Plastic toolbox with drawer and shelf, dimensions: width 650 mm / height 520 mm / depth 670 mm, lockable with padlock (padlock not included) Storage compartment for 16 plug-in slats, on left side in direction of travel, under load area Axles & Suspension BPW disc brake axles with 370 mm disc diameter Axle/chassis laser alignment reduces tire wear and fuel consumption Air suspension Rear loading height raised approx. 1200 mm (truck air suspension lowered to approx. 910 mm coupling height) No lift axle Brake System 2-line air brake system Color-coded piping for easier service Spring-loaded parking brake Duomatic connector at the front, without connecting line EBS (manufacturer: Wabco-E), Electronic Brake System with EBS socket at front, without connection cable Caution: The trailer may only be towed by vehicles that ensure effective ABS operation! With raise & lower valve + auto-reset function Fpjdjqhiyxjpfx Afkjh Vehicle driving stability system Ramp approach aid: Wabco TailGUARD with 3 ultrasonic sensors at the rear Electrics 24 volt, multi-chamber lights, yellow LED side marker lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin protected sockets at the front, without connection cable Reversing camera system with color flat-screen monitor, with wireless connection to screen, screen with suction cup mount and 24V vehicle power supply Floor Phenolic resin film-coated plywood floor approx. 30 mm thick, with longitudinal stringers for high point load capacity, suitable for forklift axle load up to max. 7100 kg Rear area with heavy duty floor, approx. 1800 mm length Rear area fitted with steel/chequer plate covering approx. 300 mm length (slightly protruding) Front wall / corner stanchions 2,580 mm high, steel volume-design corner stanchions, release mechanism for side curtain at front wall Crash Blocker: inside lower section, approx. 140 mm high with steel impact protection Middle stanchions 3 pairs of sliding stanchions, adjustable along full length, with four-fold plug-in pockets and long lower pocket 3 pairs of stanchion positions Plug-in slats Wooden plug-in slats Additional row of al

Condition: used, maximum load weight: 27,290 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,853 mm, Equipment: ABS, SDS390 101m³ X-TRA Long moving floor lift axle SAF* Deutscher Anhänger / German Semitrailer * 101m³ X-TRA Long model * SAF axles * Lift axle * Disc brakes / Discbrakes * Floor Sliding floor with rear wear plate made of V2A sheet metal, aluminum floor boards, 8 mm floor profile, ribbed design, aluminum end caps* Tires: 385/55 R 22.5 1st axle 9/9 mm, 2nd axle 12/10 mm, 3rd axle 11/9 mm * Empty weight: 7,710 kg * Permissible total weight: 35,000 kg * Payload / Working load: 27,290 kg Fpodpfx Afsrwvl Teksh * Air suspension * All data without guarantee * Further information and criteria on request. * Additional service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimum financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop / own workshop * Mówimy po polsku. * We speak english. * Goworim po russki * The repainting in your desired color is possible in our company at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and have no opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, axle configuration: 3 axles, first registration: 04/2021, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 6015 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2021, Side wall material: Tarpaulin, Sliding roof, Axle type: SAF = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 4 mm Axle 3: Tire tread depth left: 5 mm; Tire tread depth right: 9 mm Weights Tare weight: 6,015 kg Payload: 32,985 kg GVW: 39,000 kg Functional Loading platform height: 93 cm Sliding roof: Yes Environmental Emissions class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Financial Information Leasing price: €315 per month (default, 60 months); Ask for more information and terms = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands and models from various years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates can be arranged quickly • Expert technical services • The security of "recognizable quality" Fpsdpfx Aszbxp Sjfkjh • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 04/2021, loading space length: 13,700 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS - Sliding roof = Notes = Fpsdpfxjzbhi Uo Afkoh Number of axles: 3, Tare weight: 6015 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2021, Side wall material: Tarpaulin, Sliding roof, Sunroof, Axle type: SAF = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 6 mm Axle 3: Tire tread depth left: 5 mm; Tire tread depth right: 9 mm Weights Unladen weight: 6,015 kg Payload: 32,985 kg GVW: 39,000 kg Functional Sunroof: Yes Environment Emission class: Euro 0 Condition Overall condition: Average Technical condition: Average Optical condition: Average Damage: None Financial Information Leasing price: €315 per month (standard, 60 months); Ask for more information and terms = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing inventory of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), axle configuration: 3 axles, first registration: 03/2021, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,010 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = Fedpfsy Hcnqex Afksph - EBS - Lift roof = Notes = Number of axles: 3, Tare weight: 6015 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2021, Lift roof, Sliding roof, Axle type: SAF = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Twin tires; Tire tread depth left outer: 9 mm; Tire tread depth right inner: 9 mm Axle 3: Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Weights Unladen weight: 6,015 kg Payload: 32,985 kg GVW: 39,000 kg Functional Sliding roof: Yes Environmental Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: 315 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands, from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), axle configuration: 3 axles, first registration: 03/2022, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - EBS - Lifting roof = Notes = Number of axles: 3, Tare weight: 6080 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2022, Lifting roof, Sliding roof, Axle type: SAF = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 10 mm; Tire tread depth right: 11 mm Axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Axle 3: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Weights Unladen weight: 6,080 kg Payload: 32,920 kg GVW: 39,000 kg Functional Sliding roof: Yes Environmental Emission class: Euro 0 Condition Technical condition: good Fpodpjy Hcnkjfx Afksh Optical condition: good Damage: none Financial Information Leasing price: 315 € per month (default, 60 months); Ask for further information and conditions = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 04/2021, loading space length: 13,650 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 6015 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2021, Side wall material: Tarpaulin, Customs cord, Sliding roof, Axle type: SAF = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Axle 3: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Tare weight: 6,015 kg Payload: 32,985 kg Fpodpfx Afezazpxjksh GVW: 39,000 kg Functional Loading area height: 94 cm Sliding roof: Yes Environmental Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Financial Information Leasing price: €315 per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 06/2021, loading space length: 13,700 mm, loading space width: 2,400 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 6060 kg, Gross vehicle weight: 39000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2021, Side wall material: Tarpaulin, Sliding roof, Axle type: SAF = Additional Information = General Information Cabin: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 8 mm Axle 3: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Unladen weight: 6,060 kg Payload: 32,940 kg GVW: 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Financial Information Leasing price: 315 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands across different years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! Fedpfxoy U Utzj Afkoph • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,650 mm, loading space width: 2,490 mm, loading space height: 3,010 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2023, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 6080 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2023, Side wall material: Tarp, Customs cord, Sliding roof, Axle type: SAF = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Axle 3: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Unladen weight: 6,080 kg Payload: 32,920 kg GVW: 39,000 kg Functional Loading platform height: 95 cm Sliding roof: Yes Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Fedpfsy N Rnkox Afkoph Financial Information Leasing price: €334 per month (default, 60 months); Inquire for more information and terms = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is handled quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, maximum load weight: 31,410 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, Year of construction: 2020, Equipment: ABS, You can find our entire vehicle stock with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete equipment details available upon request. - 3 SAF axles - Disc brakes - 1st axle with automatic lift axle Fodpsw Tpr Uefx Afkjph - Air suspension - 24 t, 2-speed landing gear, single side operation - Rear extension ladder - Plastic toolbox with drawer and shelf - 2-line air brake system, EBS/ABS - 385/55 R22.5 tires - Cargo Floor moving floor, approx. 10 mm floor profile - Rear wall made of aluminum hollow profiles, double-winged door - LED work lights - Frame painted in DB 7350 Novagrau - Body painted in RAL 7035 light grey - Rolling tarp similar to RAL 3002 carmine red

Condition: good (used), axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2023, Equipment: ABS, = Additional Options and Accessories = - EBS - Lifting roof = Notes = Number of axles: 3, Tare weight: 6080 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2023, Customs wire seal, Lifting roof, Sliding roof, Axle type: SAF = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 3 mm; Tire tread depth right: 2 mm Axle 2: Tire tread depth left: 11 mm; Tire tread depth right: 10 mm Axle 3: Tire tread depth left: 11 mm; Tire tread depth right: 10 mm Weights Tare weight: 6,080 kg Payload: 32,920 kg GVW: 39,000 kg Functional Sliding roof: Yes Environmental Emission class: Euro 0 Condition Technical condition: good Fedpfx Aoy Iv Imsfkoph Optical condition: good Damage: none Financial Information Leasing price: €334 per month (standard, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024358, empty load weight: 6,149 kg, maximum load weight: 28,851 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: blue, The images are archive photos; the vehicle may still be in use! Chassis Platform Semi-Trailer for Freight Forwarders Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock" profile for lashing strap attachment Note: In order to attach the straps in combination with side walls, the side walls must be opened! Pair of additional lashing rings integrated into the outer frame, each rated at 2.5 t 24 t, two-speed landing leg, single-sided operation, with straight base, without compensation mechanism Pull-out ladder at the rear Side-mounted door retainers Wheel chocks with holders Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or rear swing clearance approx. 1,930 mm Underrun protection, galvanized steel Full-width rear spray flaps Half-shell mudguards With anti-spray mud flaps only on the last axle Rear impact guard "Blocker" – galvanized crosswise steel angle as forklift and hinge protection Pair of ferry lashing eyes, marked yellow Fpedpswyiw Eefx Afksh Pallet stop on both sides, approx. 15-20 mm high, bolted design; loading height is reduced by approx. 15-20 mm Spare wheel holder for one electronic wheel, including wheel mounting kit, basket type, brand Schoch! Spare wheel, same brand/type as main tires, steel rim Stainless steel toolbox, width=600/height=400/depth=500 mm, with polished, lockable door Stake pockets Front right: 5 rows of aluminum V-stake inserts Front left: without stake inserts Rear wall / rear corner posts Rear corner posts made of steel up to the lower edge of the roof, curtain pole mount with round tube and curtain tension ratchet Rear portal doors, 2-leaf design, each with 2 internal rotary bolt locks Curtain Curtain with welded horizontal and vertical straps Quick Lock system for side curtain with central locking, on left side only Stainless steel tension locks on right side Customs rope all around with holder at front wall (no customs seal, not in combination with Quick Lock) Customer labeling on side curtains and rear portal Curtain with high-strength embedded spring steel strips, left side (Attention! When fitted, no stake inserts front left) Roof Sliding roof, rear end-lift foldable upwards, sliding tarpaulin from rear to front, tarpaulin color: white EcoLift – roof can be raised by approx. 380 mm, both sides, gas strut assisted Optimal rain gutter at rear, upper end rail, above the doors Paintwork Frame: Hot-dip galvanized incl. passivation Landing legs: black coated Front corner posts: galvanized and painted to match front wall color Front wall: MB 5328 blue Rear corner posts: galvanized and painted to match rear wall Rear wall: MB 5328 blue Curtain: RAL 5010 gentian blue Pallet box lid: RAL 2011 deep orange The images are archive photos; the vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902029406, empty load weight: 5,800 kg, maximum load weight: 29,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2021, next inspection (TÜV): 06/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: silver, The images are archive images; the vehicle may still be in use. Chassis, semi-trailer, transport company Fine-grain steel, welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approximately 8,040 mm long, 6 coil supports (coil pockets, internal dimensions 82 x 52 mm), coil cover with screen-printed panels and steel crossbars, 2 gap band covers for the coil well, each approximately 293 mm wide, tare weight approximately 13 kg per cover, outer frame slightly angled with "Load-Lock profile" for securing lashing straps, note: to attach the straps in conjunction with the side panels, the side panels must be opened! 9 pairs of lashing eyes, each rated at 5 tons, embedded in the area of the coil well, 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without slide-out compensation, note: free support foot clearance or free rear swivel radius approximately 1930 mm, without supports, extension ladder at the rear, door latch on the side, 2 chocks with holder, aluminum side impact protection, bracket positioned transversely to the longitudinal beam and attached to the longitudinal beam to support aluminum slats, aluminum underrun protection, semi-elliptical fenders, with anti-splash flaps according to EC regulations, rear impact protection, 1 plastic toolbox, 2 pairs of stake pockets embedded in the outer frame, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 19219, 2 stake pockets embedded centrally in the floor, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 192198, note: stake pockets/recesses are not designed for the sole securing of long materials, pipes, etc., without wrapping. Fodswhp A Depfx Afkoph Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight, air suspension, without lift axle. The images are archive images; the vehicle may still be in use.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902017848, empty load weight: 6,537 kg, maximum load weight: 28,463 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2015, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: silver, The images are archive images! The vehicle may be in use! Fine-grain steel welded construction in lightweight design, kingpin plate with 2 replaceable kingpins, outer frame slightly angled with Load-Lock profile for attaching lashing straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened. 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation, door lock on the side, support wedges with holder, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: free support leg angle or free rear pivoting radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle, with anti-splash flaps only on the last axle, rear impact protection, pallet stop on both sides approx. 20 - 25 mm high, bolted design, loading height reduced by approx. 20 - 25 mm. Fpjdpfx Afjkyrmijkeh BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, operation of 3 brakes (with starting assist up to max. 25 km/h). Floor: Sieve plate approximately 30 mm thick, cross members with omega insert, on longitudinal stringers for high point load capacity for forklift axle load up to max. 7100 kg. Front wall/corner posts: 2,480 mm high, corner posts steel in full-volume design, release device for side tarpaulin on front wall, at the bottom inside at approx. 140 mm height with steel impact protection. Roof: Sliding tarpaulin, rear end lift that folds up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin color: white, lifting roof hydraulically with hand pump at each corner post, can be raised by 400 mm. Can be driven with the roof raised, adjustable by 4 x 50 mm upwards. Note the overall height! Includes tarpaulin extension by 200 mm, only in conjunction with the tarpaulin.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902037402, empty load weight: 6,460 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2026, next inspection (TÜV): 03/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,010 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, ground clearance: 310 mm, The images are archive images // The vehicle may still be in use! Tarp color can be freely selected. - Patented "D-Lock" door latch for I-Lock closure (not in combination with a direct tarp tensioner), awarded with the "INTERNATIONAL TRAILER AWARD 2025". - Pallet box for 24 Euro pallets (ground clearance approx. 310 mm). - "Heavy Blocker" rear impact protection + "roller ramp buffer" on the side. - 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable, mounted on both sides behind the axle assembly. - 1 storage box for fire extinguishers up to 6 kg, mounted on the front wall. - 1 fire extinguisher (ABC powder, 6 kg). - 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking". Fpsdpfx Ajyc D H Sofkjh - 3 pairs of sliding bars, adjustable over the entire length, with 4-fold insertion pockets and a long pocket at the bottom. - 5 rows of aluminum V-shaped insertion slats (in combination with side walls, 4 rows). - 2 pairs of Vario steel slats, in combination with Vario beams for front and rear load securing. - Fliegl quick-release cover. - Roof: non-elastic, minimal deflection of the roof beam during loading and unloading. - Optimal rain gutter at the rear, at the top of the end rail, above the doors. - Fliegl manufacturer certificate for superstructure strength according to EN 12642 XL. Tarp color can be freely selected.