Used Felix 100Sl Ce Dicer Felix 100Sl Ce Dicer for sale (9,710)

Condition: used, functionality: fully functional, Year of construction: 2001, pipe diameter (max.): 60 mm, power: 1.85 kW (2.52 HP), I-Beam steel, flat 100 x 15 (Ø 500) mm I-Beam steel, upright 50 x 10 (Ø 500) mm Angle steel 50 x 6.0 (Ø 600) mm Round material 35.0 (Ø 500) mm Max. tube diameter 60 x 2.0 (Ø 1200) mm Square material 50 x 50 x 3 (Ø 1000) mm Bending speed 10.0 rpm Top roller diameter 165 mm Bore 40.0 mm Dimensions (L-W-H) 560 x 1430 x 980 mm Adjustment range: upper roller 124 mm Total power requirement 1.85 kW Weight 275 kg Low usage (!!) Manufacturer's list price incl. accessories approx. €12,500 Special price on request Equipment: - electro-hydraulic ring/profile bending machine - heavy and robust machine body - 2x powered rollers (MR2 series) - segmented roller dies - digital position display for top roller (0.1 mm) Hnsdpfxewvrazo Ap Don - manual upper roller adjustment - forward / reverse operation of bending rollers - Bending speed approx. 20% higher than comparable machines in its class - shafts made of forged & ground chrome-nickel steel - machine base frame - suitable for horizontal and vertical operation - mobile control panel - CE marking

Condition: used, Year of construction: 2019, We are offering this used Wild Goose Canning WGC-CE brewery bottling machine, manufactured in 2019. Hsdpfxjza Tt Nj Ap Donn Top Level BOM number: WG5 Date of manufacture: October 2019 Rated voltage: 230 V Phase connection: single-phase Frequency range: 50 / 60 Hz Full load current: 12 A Short-circuit current rating: 10 kA RMS sym Serial number: WGC-0937 If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2014, operating hours: 9,700 h, CAT 336 tracked excavator The machine has only 9,700 operating hours and is in good condition Hnedpfxex Tyq As Ap Djn Operating weight approx. 36,800 kg

Condition: used, Year of construction: 2021, operating hours: 5,800 h, CAT 336 Crawler Excavator The machine has only 5,800 operating hours and is in good condition. Hodpfx Ajyyg Dpsp Djnn Operating weight approx. 36,800 kg.

Condition: used, Year of construction: 2021, operating hours: 5,300 h, Tracked excavator CAT 352-07 Hsdpfx Ajyy Hvxjp Djnn The machine has only 5,300 operating hours and is in good condition Operating weight approx. 52,800 kg

Condition: used, Year of construction: 2005, pressure 30 t Stroke 190 mm Hodpeyfwvrjfx Ap Djnn distance between columns 440 mm side window 450 mm daylight (max. stroke up, adjustment up) 350 mm table surface area 595x450 / 440x595 mm table height over floor 725 - 900 mm table adjustment range 175 mm ram surface 90 mm power requirement 0,5 kW Weight 1,20 kg dimensions (WxDxH) 1,5 x 1,0 x 2,9 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck Basic unit power pack K 30.181-190.10 with stroke limitation, anti-rotation protection, universal underframe UUM 1-200.031, adjustable working height Total stroke 190 mm / power stroke 10 mm

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed, in very good condition, CE compliant. Technical data: >> Year of manufacture 1990, machine no. 2102-5046 >> Fixed angular table >> Speed: 40 - 2000 RPM >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support, adjustable by 100 mm >> Vertical quill and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 800 kg Accessories and equipment: Hnodpfszbb E Ajx Ap Don >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, parts list About the machine: Offered is a universal milling machine Deckel FP1 in very good condition and CE compliant. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs very smoothly. In this newer FP1 model, the feed is steplessly adjustable in three axes, and the machine also has rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain control system, you can enter dimensions that the machine will automatically approach. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes the work easier and even more precise. Take the opportunity to inspect and test this machine on site under power.

Condition: excellent (used), Format (cm): 72 Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Hodpfxjvxqz Do Ap Donn

Condition: used, mileage: 1,001 km, first registration: 01/2006, color: blue, driver cabin: other, gearing type: other, Year of construction: 2006, Equipment: crane, Vehicle location: Bovenden, emergency stop, foldable, 2-point hydraulic outriggers, 3 hydraulic extensions Load chart: 3.4m-4400kg, 4.6m-3350kg, 6.25m-2400kg, 8.1m-1800kg, 9.9m-1400kg! ACCESSORIES INFORMATION IS SUBJECT TO SUITABLE ACCESSORIES. Subject to change, prior sale, and errors! Hedpfx Apsvy H Eze Djnn - .

Condition: good (used), Holac AU125 dicer, direct from meat factory. Good condition. Hnedpfx Apjqv Ezkj Don

Condition: used, Technical details: material width: 200 mm material thickness: 1,5 mm Number of Straightening rolls: 5x oben/upper/arriba no. of rolls: 6x unten/ lower/abajo throughput speed: nicht bekannt/ unknown/desconocido m/min current: 220/50 A/Hz total power requirement: 1,5 kW Hnsdpfx Aou Ic D Top Djn weight of the machine ca.: 0,447 t space requirements of the machine approx.: L:0,88xB:0,76xH:1,26 m description: machine does have 11 rolls upper roll: width: 210mm, dia. approx. 60mm, driven adjustable lower roll: width: 210mm, dia. approx.60mm, driven, not adjustable *

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: CAI965725, overall weight: 470 kg, power: 22 kW (29.91 HP), pressure (max.): 7 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Worthington RLR 30E V G10 is a lubricated compressor, ideal for those seeking a robust and efficient machine. Manufactured by the renowned WORTHINGTON brand, this specific model is well-suited for a range of industrial applications thanks to its capability to operate at 7 bar pressure. Hedpfx Asy Eyr Rjp Djnn Weighing 470 kg, it is designed to deliver stable and continuous performance while remaining relatively compact for its category. This used compressor maintains the high quality and reliability expected from the Worthington name. This piece of compression equipment is a viable solution for businesses looking to optimize their performance while managing costs effectively. Its robustness and technical specifications make it a relevant choice for those who prioritize both durability and efficiency.

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Hnjdpfxoxnlgco Ap Don Storage location: Garbsen

Condition: used, mileage: 299,000 km, power: 132 kW (179.47 HP), first registration: 03/1992, fuel type: gasoline, color: black, gearing type: automatic, number of seats: 5, Equipment: ABS, air conditioning, central locking, immobilizer system, for sale on behalf of a customer TOP condition Hnjdpfx Apomk Hkfe Dsn ORIGINAL

Condition: used, Year of construction: 2021, machine/vehicle number: ITJ514296, AIR ENERGIE CONTROL 3+ controller, maximum pressure 13 bar Hedpfsy Sqiyex Ap Dsnn

Condition: used, Year of construction: 2021, machine/vehicle number: ITJ719403, AIR ENERGIE CONTROL 3+ controller, maximum pressure 13 bar Hsdpfx Asy Sqkdop Denn

Condition: good (used), Year of construction: 2019, operating hours: 1,404 h, machine/vehicle number: 397, Offer 26148 Technical data: Hjdpfx Apsy Uwhbe Dsnn - Pressing force 420 kN / 42 t - Stroke 0 - 300 mm - Stroke speed 0 - 0.6 m/min - Tool height 200 mm - Bending capacity - with MW 125 flat prism, approx. 200 x 16 mm - with MW 240 flat prism, approx. 200 x 24 mm - Pipe bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - for angle programming + length programming - controlled length stop 3000 mm - various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Condition: good (used), Year of construction: 2003, - Table length (mm): approx. 3000 - Saw blade: swiveling - Scoring saw: included Hnodpfx Apey Tnbpj Don - Main motor power (kW): 5.5 - Power (kW): 0.75

Condition: used, Year of construction: 1996, pressure 100 t throat 510 mm stroke 600 mm Hodpovuunmofx Ap Djnn dayligth 1000 mm table surface area 1025 x 650 mm die cushion capacity 25 t die cushion stroke 200 mm die cushion area 600 x 400 mm table height over floor 970 mm ram surface 1025 x 650 mm feed down 350 mm/sec feed up 330 mm/sec working feed 30 - 43 mm/sec oil volume 540 l total power requirement 48,0 kW weight of the machine ca. 12,0 t required space 1,2 x 2,7 x 3,9 m with oil-hydraulic drive, hydraulic drawing cushion in table Video of the finished 'sister machine' - with new electrical control - available

Condition: used, Year of construction: 2007, pressure 315 t distance between columns 1750 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1500 mm pressure of drawing cushion in table 125 t Hjdpfx Apsvuukbe Dsnn stroke of drawing cushion in table 200 mm die cushion area 1200 x 1400 mm table height over floor 750 mm ram surface 1640 x 1500 mm power requirement 55,0 + 11,0 kW weight 29,5 t dimensions (WxDxH) 3,2 x 4,5 x 5,8 m Height above floor 5,1 m year of manufacture 1983 - 2007: modernization of electrical control (Siemens S 7) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact cushioning

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm Hnodpfsvuuckjx Ap Dsn dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t Hnedpfxsvuua Ns Ap Djn dimensions of the machine ca. 2,7 x 1,7 x 3,6 m with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min distance between columns 1270 mm dayligth (stroke and adjustment up) 590 mm Hedpfx Ajvut Uxjp Dsnn column travel -side 440 mm table surface area 1250 x 900 mm hole in the table 950 x 300 mm ram surface 1250 x 800 mm ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 64,5 kW Weight 21,00 t dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: used, Year of construction: 1996, pressure 160 t distance between columns 1380 mm Hedpovut Ilsfx Ap Donn stroke 300 mm distance table/ram, max. stroke up, adjustment up 500 mm table surface area 1250 x 850 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 150 mm die cushion area 450 x 450 mm table height over floor 900 mm side window 250 x 400 mm ram surface 1350 x 850 mm speed down 400 mm/s speed up 350 mm/s working speed 50 mm/s oil volume 1850 l power requirement 58,0 + 11,0 kW weight 24,1 t dimensions (WxDxH) 2,85 x 2,15 x 4,6 m with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion / ejector in table, cutting impact cushioning, mechanical depth stop (motoric adjustable), ram interlocking

Condition: used, Year of construction: 2003, pressure 300 t distance between columns 1640 mm stroke 900 mm Hsdpfxjvut H Us Ap Donn Distance table/ram, stroke up 1200 mm table surface area 1600 x 1300 mm table height over floor 890 mm ram surface 1600 x 1300 mm Speed down 400 mm/s Speed up 300 mm/s Working speed 10 mm/s Oil volume 1150 l power requirement 42,5 kW weight 25 t dimensions (WxDxH) 2,8 x 2,5 x 5,0 m year of manufacture 1994 overhaul 2003 with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, ram interlocking, two-hand operation No foundation pit necessary