Used Erw -Austria Pipe - Tube Production Line for sale (27,888)

Year of construction: 2023, operating hours: 20 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2022/02, Complete EPS Production Line / EPS Block & Insulation Board Manufacturing Plant – Like New Complete, almost-new EPS production system for sale – immediately available in Hungary, European Union. We are offering for sale a complete industrial production system for the manufacturing of EPS blocks and EPS insulation boards. The production line has been used only to a very limited extent and is in excellent condition. This presents an opportunity for an established manufacturer or investor to acquire a complete EPS production facility at a substantially lower investment cost than a comparable new system, without the long delivery and commissioning time associated with a new plant. Two purchase options: 1. Complete production plant including industrial site Price: EUR 859,000 + VAT The complete production system is offered together with the industrial site and the infrastructure included in the sale. 2. Complete machinery and production system without site and containers Price: EUR 769,000 + VAT The complete machinery and production equipment can also be purchased separately and relocated to the buyer's own production facility. Condition and availability Djdpfxoz Alpmj Adhocn The equipment is almost new and has been used only to a very limited extent. The complete production facility is available immediately and can be inspected in Hungary by prior appointment. Technical documentation and further information are available for serious prospective buyers. Key advantages: Complete industrial EPS production system EPS block production EPS insulation board production Almost-new condition Very limited use Immediately available Located in Hungary, European Union Significantly lower investment than a comparable new plant No long manufacturing lead time Available with or without the industrial site Technical documentation available Inspection possible by prior appointment Technical handover and support can be discussed individually Assistance with dismantling, preparation for transport, installation and commissioning can be agreed upon separately Investment comparison The estimated replacement value of a comparable new production system is approximately EUR 1.25–1.35 million + VAT, depending on the configuration. Selling price Complete production plant including industrial site: EUR 859,000 + VAT Complete machinery and production system without site and containers: EUR 769,000 + VAT Serious inquiries only. A detailed equipment list, technical specifications, photographs, videos, and further documentation can be provided to prospective buyers. The production facility can be inspected in Hungary by prior appointment.

Condition: excellent (used), CATALOGUE NUMBER 7816 TECHNICAL DATA DDCA - length of the sanding belt: 180 – 845mm - width of the sanding belt: 30 – 75mm - thickness of the sanding belt: 10 – 45mm - spindle diameter: 30mm - max. disc diameter: 250mm - 5 spindles: - left side: 1) vertical upper 2.2kW 2) horizontal lower 2.2kW right side: 1) vertical lower 2.2kW 2) vertical upper 2.2kW 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - material clamping device: 2 pcs - stepless feed speed adjustment: 0-10m/min - spindle diameter: 5x100mm - dimensions (L/W/H): 1870/2230/1320mm DDGA - width of the workpiece: 35 – 130mm - thickness of the workpiece: 10 – 40mm - minimum length of the workpiece: 200mm - spindle arrangement: 1) lower 5.5kW 2) right 5.5kW 3) left 5.5kW 4) upper 5.5kW - spindles adjustable up/down - 6-knife cutter heads mounted on the upper and lower spindles - spindle diameter: 40mm - milling cutters mounted on the right and left spindles, max. diameter: 50mm - spindle diameter: 30mm - 2 feed speeds: 4.9kW - central chain lubrication via an oil pump - spindle diameter: 4x125mm - dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES Dcodpfx Ajzx Rkzjdhon - Polish production - 5 spindles - unpainted - very good condition - used production line Net price: 52900 PLN Net price: 12302 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (price may be subject to change in the event of significant exchange rate fluctuations)

Condition: used, Type Production Line Radiator production line Dcedpfjzpbl Dsx Adhjn Further information can be found in the attached PDF document. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Year of construction: 2016, operating hours: 9,001,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. Dcjdpfx Ajy Uk A Sedhjn SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE .

Year of construction: 2016, condition: used, A complete bread production line with proofing equipment is offered. The production line consists of a total of nine documented components: WP Kemper lifting and tipping device HK200L, WP Haton conical rounder CR59-AT, WP Haton dough divider V300, WP Haton conveyor 500mm, WP Haton conveyor 1000mm, WP Haton intermediate proofer AF2002, WP Haton discharge conveyor with retracting belt, WP Haton long moulder Combi UL and WP Haton delay conveyor. Inspection possible by appointment. Dcjdsz H Ur Aspfx Adhon

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, DESCRIPTION: Complete production line: hydraulic uncoiler, guided feeding system, roll forming machine, hydraulic post-cutting, and automatic run-out/stacking. Profile-specific tooling for TR135-310-930 high-profile sheet metal. Siemens PLC/HMI control system and Schneider frequency-controlled main drives. Minimum thickness: 0.75 mm, Maximum thickness: 1.5 mm Effective width: 930 ± 5 mm Feeding width: 1500 mm Dcedpfezvaibex Adhsn Material: Galvanized coil, Yield strength: 350 MPa Working speed: approximately 20 m/min Stacker length: 12 m Location of the line: Serbia

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2025, For sale: Welding and deburring line with a turning table for PVC windows. The line consists of: - Welding machine - HOLLINGER MSP, year 2005 - Transport and cooling table - HOLLINGER SVS, year 2005 - Automatic cleaning machine with welded frame turning - ROTOX EPA 472, year 2005. The production line was only used in Germany and is in very good condition, having been regularly serviced. Negotiable price: 25,000 euros + VAT. Dcedpez A R I Eefx Adhjn

Condition: like new (used), SACOME Industrial Juice Processing Line – Stainless Steel SACOME industrial line for the processing and treatment of juices, nectars, and liquid beverages, designed to integrate different operations for the preparation, circulation, and thermal treatment of the product within a continuous system. The unit incorporates process tanks, heat exchangers, sanitary pumps, piping, valves, and instrumentation, mounted on a common stainless-steel structure with an upper access platform. The system allows the product to be conditioned under controlled parameters before being sent to the next stages of production or packaging. MAIN FEATURES -Manufacturer: SACOME -Type: Industrial juice processing line -Application: juices, nectars, and liquid beverages -Continuous processing system -Process tanks in stainless steel -Product circulation and recirculation system -Tubular heat exchangers -Indirect thermal treatment -Sanitary product pumps -Process piping and valves -Pressure and temperature instrumentation Dcodpfx Adoynkgcjhjn -Process condition control -Circuits for thermal services -Construction primarily in stainless steel -Upper operation and maintenance platform -Self-supporting industrial structure -Hygienic design for the food industry -Integrable with preparation, homogenization, and filling systems PROCESS The previously prepared product is introduced into the SACOME line and circulates via sanitary pumps through the different process equipment. The heat exchange system allows the product to be heated indirectly, keeping the product and the service fluid separate. Depending on the operating configuration, different stages of heating, thermal maintenance, and subsequent cooling can be performed. The temperature control and installed instrumentation allow the established conditions to be maintained during the treatment. The product that does not reach the required parameters can, depending on the circuit configuration, be recirculated to go through the process again. Once treated, the product can be sent to a storage tank, homogenizer, or directly to the corresponding filling line. APPLICATIONS Especially suitable for manufacturers of juices, nectars, fruit beverages, and other liquid food products that require an industrial system for thermal treatment and product conditioning. Depending on the characteristics of the heat exchangers and the installed configuration, it can work with: -Fruit juices -Vegetable juices -Nectars -Beverages with pulp -Liquid purees -Fruit bases -Formulated beverages -Other compatible liquid or semi-liquid products The line can be integrated with mixing systems, homogenizers, buffer tanks, CIP systems, and filling equipment to form a complete beverage production system. Machine available for inspection. Additional technical information, capacities, process temperatures, dimensions, additional photographs, or videos can be provided upon request.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1,200 units per shift! TECHNICAL DETAILS Production capacity: 150 pcs/h MACHINE DETAILS Electrical data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra / Thin frame machine i-3 – CE version Dcodszxgmrjpfx Adhsn Warm-edge spacer production system Production of Intercept ULTRA stainless steel, ThinPlate or BlackLine

Condition: good (used), Line now available for immediate sale. Was producing thins for supermarket contracts. Dcedpfx Adewhagmehon

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. Dedpfx Asy Exrpsdhocn Production line units: 1. Zhejiang Baina 150 20D 1000Kg/h cold feed vacuum extruder (Standard) 2. Zhejiang Baina EJ-PPF-150-04-00 conical die (Pneumatic) 3. Zhejiang Baina 6m infrared curing oven (width 1000mm) 4. Zhejiang Baina 6m hot air curing oven (width 1140mm) 5. Zhejiang Baina 6m hot air curing oven (width 1440mm) 6. Zhejiang Baina 6m hot air curing oven (width 1600mm) 7. Zhejiang Baina 6m hot air curing oven (width 1800mm) 8. Zhejiang Baina 6m hot air curing oven (width 2000mm) 9. Zhejiang Baina 6m hot air curing oven (width 2300mm) 10. Zhejiang Baina 6m hot air curing oven (width 2500mm) 11. Zhejiang Baina 6m hot air curing oven (width 2800mm) 12. Zhejiang Baina 36M FF-SLX-02-00 (3 layers * 12m) cooling system 13. PCM automatic longitudinal and transverse industrial cutting machine 2000mm 14. AC-15AD liquid chiller with 285 liters water tank If you are interested, we will send you a detailed description and data.

Condition: used, Year of construction: 2016, Aumann LWS/K 6-160 linear winding machine / production system for niQ stators, year of manufacture 2016. Two identical machines are available. Technical data: compressed air connection 5 bar, mains fuse 32 A, rated current 7.2 A, operating voltage 3 x 400 V / N / PE, 50 Hz, control voltage 24 V DC, connected load 5 kVA. Dimensions approx. 1,950 x 1,970 x 2,150 mm (L x W x H). The machines are offered including documentation. An on-site inspection is possible by appointment. Dcodpfjz I Dc Hjx Adhen

Year of construction: 2021, condition: used, Tube manufacturing line Manufacturer: Bazhou Wanxin Industrial and Trading Tube manufacturing line consisting of: Double-station unwinding device Function: Unwinds the coil passively Design: 2-station design with 180-degree rotation, manual expansion Advantages: Fast loading, simple and convenient operation Hydraulic shear and butt welding machine Function: Cuts off the front and rear ends, centers the strip, and welds the strip back together Design: Manual hydraulic shear with cantilever, front and rear pressure rollers, front and rear centering rollers, welding device Cutting method: hydraulic shear Press material method: double-cylinder press Welding method: manual welding Strip storage device Function: To ensure continuous production of the welded tube, a storage unit must be installed after the shear and butt welding platform so that the storage unit can continuously feed the strips while the strip steel material is prepared for stacking, unwinding, butt cutting, and welding. Design: Frame type, with moving and fixed frames (including feeding device) Feeding speed: max. 120 m/min Storage speed: max. 200 m/min Length of stored strips: 200 - 400 m Pinch roller motor: AC 11 kW Forming and sizing machine Working height: +850 mm Power: AC/DC motor: 160 kW, 1000 - 2000 rpm Reducer: Gear hardening Arrangement: Passive five-roll straightening machine, vertical rolls for feeding material, forming through 7 horizontal roll stands and 8 vertical roll stands, guiding, pressing, deburring, cooling, and sizing through 6 horizontal roll stands and 5 vertical roll stands, 1 round sizing stand Round sizing stand: 1 set of smoothing device, two sides with 8 rolls each, 4 rolls per side. 30 mm, 40cr, quenching, tempering, and hardening Horizontal roll shaft: 60 mm, bearing at position 55, made of material 40Cr Heat treatment of horizontal roll: surface hardening, HRC 50-55 Bearing guide: forged steel 45# Vertical roll shaft: 40 mm, material 40Cr, quenched, tempered, and hardened Vertical and horizontal rolls - Design: Portal design, opening width: 120 mm, clamping of horizontal roll stand: adjustment via worm gear Material of horizontal and vertical roll stands: welded (aging annealing) Gearbox: Gear: Spiral bevel gear Shaft of pinch roll: 50 mm, 2 rolls for pinching, adjusted via a manual screw rod Guide shaft: 40 mm Deburring knife: 2 pcs., one for working and one as a spare Cooling tank Cold cut-off saw Function: The cold cut-off saw is one of the most important machines in the ERW tube line. It can cut the tubes to the preset length during high-speed production. Djdpfxezuz H Sj Adhscn Type: KK-5-50 Tube diameter: Round tubes 16-63.5 mm and corresponding square and rectangular tubes Length cut: any length between 1 - 6 m Material thickness: 0.6-2.5 mm Drive motor: 11 kW servo Yaskawa Feeding motor: 2.9 kW serco Yaskawa Saw motor: 11 kW, AC motor with frequency converter Feeding method: Servo multi-stage speed feed Speed adjustment: max. 110 m/min Clamping force: pneumatic Drag chain Saw blade: 400 mm Saw gearbox model: KK-80 Saw stroke (device length): 3 m Device dimensions: 4500 x 1500 x 1300 mm Conveyor track, table, and packaging machine Function: The formed tubes are automatically removed from the roll.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Complete automatic URBAN welding and cleaning line for PVC windows and doors profiles. System consisting of 2 paralel welding machines: 1 four-head welding units of AKS 6410 27/25, 1 six-head welding units of AKS 6610 27/25, 1 automatic unloading and transfer bench TBA-F 26/28-TE 9M, 2 automatic transport bench TBA-F 26/28H to 1 automatic four-head cleaning unit SV 800/2.5M and 1 final TBA bench. Set of jaws for Komerling Profine profiles. Sold due to company closure. Djdpsyundrsfx Adhecn

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: K 0122, Equipment: CE marking, For sale: industrial machine K. Schulten KS AluKap 350-3, designed for the production of roller shutters with armored slats. The machine has been in use for 10 years. Technical data: - Manufacturer: K. Schulten GmbH & Co. KG – Germany - Model: KS AluKap 350-3 - Year of manufacture: 2011 - Machine number: K 0122 - Maximum slat width: 3500 mm - Minimum slat width: 500 mm - Power supply: 400 V / 50 Hz / 2.5 kW - Air consumption: approx. 250 l/min - Pneumatic system pressure: 8 bar - Weight: approx. 900 kg - CE marking Condition: used, operational. Reason for sale: replacement with a newer model. The machine will be available for collection in approximately 3 weeks. You are welcome to visit and see the machine in operation. Dedpfx Adezxcn Eshjcn Price: 20,000 EUR net.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 32.3.0218, input voltage: 400 V, type of input current: three-phase, KÖNIG ARTISAN SFC – 2012 Compact König line for the production of rustic rolls, ciabattas, and various products cut from a dough sheet. Year: 2012 Key features * Manufacturer: KÖNIG * Model: Artisan SFC * Year: 2012 * Capacity: up to 300 kg of dough/hour * Dough sheet width: up to 170 mm * Belt speed: up to 1.5 m/min * Wide feed conveyor for dough loading * Flour dusting system * Dough sheet calibration rollers * Longitudinal cutting system * Transverse cutting guillotine * Stamping/forming station * Interchangeable cutting rollers and stamping tools * Adjustment system allowing the production of many different formats Products that can be produced Depending on the tools installed: * Ciabattas * Square rolls Dcedpfxozyv Nxs Adhen * Rectangular rolls * Triangular rolls * Rustic products * Stamped products * Various special shapes Several cutting and stamping tools are available with the machine. The Artisan SFC works directly from a dough sheet and allows for gentle processing, particularly suitable for soft doughs and rustic products. Machine can be viewed and tested by appointment. Photos, videos, and additional information available upon request.

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Complete Abrasive Belt Production Line for Sale – Excellent Condition (2024) Complete Abrasive Belt Manufacturing Line – Ready for Production We are offering for sale a complete abrasive belt production line, purchased new in April 2024 from iSharp China. The equipment is in excellent working condition, has been professionally maintained, and is available immediately. Equipment included: 1. Cutting to Length Machine – CTB-L/W-1800      Quantity: 1 Maximum cutting width: 1800 mm Cutting angle: ±55° / 90° Pneumatic pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 2. Skiving Machine – SKV-C-N      Quantity: 1 Skiving speed: 30–200 mm/s Pneumatic pressure: 0.7 MPa Installed power: 7 kW Application: abrasive belt joint preparation / skiving 3. Abrasive Belt Press – PRS-480       Quantity: 1 Rated pressure: 15 tons Maximum width: 400 mm Press board temperature: 20–60°C Press holding time: 0–999 sec Power supply: 220V / 1PH / 50Hz 4. Rolling Abrasive Belt Press – PRS-R-1900        Quantity: 1 Pressing width: 1900 mm Pressing mode: Rolling Pressure: 350 kgf Press board temperature: 20–60°C Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 5. Jumbo Roll Slitting Machine – SLT-R-1650N Quantity: 1        Slitting width: 50–1650 mm Slitting speed: 2–10 m/min Blade pressure: 6–60 kgf Slitting accuracy: ±0.5 mm Working pressure: 0.7 MPa Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 6. Narrow Belt Slitting Machine – SLT-B-300   Quantity: 1 Application: narrow abrasive belt slitting Djdpfx Adozrzk Eshscn 7. Belt Slitting Machine – SLT-B-650        Quantity: 1 Belt width: 10–650 mm Belt length: 530–4000 mm Blade pressure: max. 500 kgf Belt tension: max. 160 kgf Air pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 8. Wide Belt Slitting Machine – SLT-B-1600 Quantity: 1 Maximum slitting width: 1600 mm Belt length: 1400–3200 mm Air pressure: 0.7 MPa 9. Abrasive Disc Punching Machine – PUN-40T1500    Quantity: 1 Stroke: 5–150 mm Power supply: 380V / 3PH / 50Hz 10. Portable Forklift – ELS500-1000KG   Quantity: 1 Application: material handling / lifting equipment 11. Moulds / Cutting Dies   Quantity: 44 pieces Various moulds / cutting dies for abrasive disc production Advantages: Complete production line Excellent mechanical and cosmetic condition Low operating hours Ready for immediate production Ideal for companies looking to expand production capacity or start abrasive belt manufacturing The original purchase value of the machinery exceeded USD 100,000 (excluding shipping and import costs). Location: Oradea, Romania The machines can be inspected under power by appointment.

Condition: used, Year of construction: 2015, Biesse Uniline 4500 CNC processing center (i.e. for window & door frames) Description Biesse Uniline 4500 Machine nr; 1000004833 Year of construction: 2015 Machining lengths: 175 - 4,500 mm Number of milling motors: 1 Motor power: 19.2KW (25.7HP) Label printer: No Tool holder: HSK 63F Dcedpfx Aozp Hbqjdhen Changer type: Fixed + movable Number of positions in toolchanger: Flexstore total 44 Software: BiesseWorks Office licenses: 1 x Fencing: Yes complete Extra The machine has a MULTIFUNCTION UNIT EQUIPPED with a drilling unit with four tool outputs. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER25 recordings, speed 5,000 rpm. (If this drilling unit is also to be used for sloping frames, only two exits (opposite each other) are used). The machine also has a MULTIFUNCTION UNIT EQUIPPED with a mortising unit with two tool outlets. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER32 recordings, speed 16,000 rpm. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Year of construction: 2007, condition: reconditioned (used), functionality: fully functional, Used production line, fully refurbished. In perfect working order. Details and price available upon request. Djdpez Hyxhofx Adhjcn

Condition: used, Year of construction: 2023, functionality: fully functional, CLT Cross-Laminated Timber (CLT) production line with CNC machining center Capacity: approx. 25,000 m³/year (2-shift operation) Functional Description / Scope of Supply: - Longitudinal lamella feeding: Loading – Singulation - Cross lamella feeding: Loading – Vacuum destacking – Feeding to planer - Formation and buffering of longitudinal layers: Longitudinal layer preparation and discharge station - Formation and buffering of cross layers: Two-stage cross layer buffer – Cross layer discharge station Dcodpoxzy N Sjfx Adhen - Layup and gluing area: Vacuum layup gantry – Adhesive application gantry – Layup table - CLT press: TimberPress X331 - Outfeed area after CLT press: Cross transfer carriage to buffer stations, Reichenbacher system and discharge station with flipping unit - Reichenbacher CNC machining center CLT blanks (LxWxH): Min.: 6,000 x 2,000 x 60 mm Max.: 12,040 x 3,140 x 350 mm 3–9 layers Raw material: Longitudinal layers (LxWxH): Min.: 6,000 x 100 x 20 mm Max.: 12,040 x 280 x 50 mm Cross layers (LxWxH): Min.: 2,000 x 105 x 23 mm Max.: 3,140 x 285 x 53 mm Price and further information available on request.

Condition: used, Second-hand SAC window production line comprising: - Automation Dcodpfxsz Dttyo Adhjn - SAC Type P5 (left-hand) - SAC Type P5 (right-hand) - SAC Type T400 - Window tool set IV 72/92 for sashes Technical data: - On request

Condition: used, Second-hand Weinig UC-Matic window production line, comprising: - Material feed station - Unirex No. 1 - Unirex No. 2 - Turner Dcodjz Dtwxepfx Adhen - Unitec - Univar 12 - Complete mechanisation Including Oertli Vienna IV 72 & 92 window tool set for timber and timber-aluminium Technical data: - On request.

Condition: used, Year of construction: 2020, functionality: fully functional, AL-2400 mm SS PP Spun-Bond Machine Line ( Filament 1.5D-1.8D ） -Raw Material： Polypropylene granule，master batches，additive -Production Process: With high temperature filament drawn, certain proportion of polypropylene, master batches and additive are drawn into net by negative pressure, which are boned together being into fabric by calender. -Annual Output: 4800 Tons/Year（30gsm） Dcsdpfxozlg Iij Adhen -Fabric GSM: 9-60 g/m2 -Installed power: Around 1500KW

Condition: used, Year of construction: 2017, Roll production line, dough band system, Lippelt Rustica Round 220 - Softrounder Year of manufacture: 2017 Condition: used, fully functional Approx. 5530 operating hours Rustica with Softrounder – the all-rounder for processing square and round-shaped wheat rolls With punching station and cutting guillotine – for individual and unique rolls Processes all types of dough, cuts all sizes, stamps patterns into your rolls, or cuts out triangles Ideal for producing rose rolls with fat application 1 to 6-row operation Dedpfx Ajz A Ry Uedhocn Discharge device for baking trays with a maximum size of 670 x 1000 mm With transverse belt, retractable for the discharge device for further processing Transverse belt with pressure roller and shaping board With seed station (water bath and seed rotating disc), type: Rumo 6 for double-sided seeding Touchscreen control with recipe memory Dough band width 220 mm Includes 2 punching dies (Veronese 5-row and double oblique cut) Includes shaping cups for 40-80g (5-row) and 80-120g (3-row)

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer Dcedpohgbarofx Adhen pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas