Used Embedding Center Tissue-Tek Tec 4715 Embedding Centre With Cryo Console Coldplate for sale (22,749)

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Pgjdpfx Aev Rpxloc Ajt Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: good (used), Included in the scope of delivery: 1x bracket for push-through lock, used Material color: Sendzimir galvanized Manufacturer: SLP Podpfx Asipuggec Asgt Leg A: approx. 200 x 140 mm Leg B: approx. 200 x 38 mm Opening dimension: approx. 52 x 32 mm for rectangular tube: 50 x 30 mm Weight/piece: 0.930 kg

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Pgjdpfx Aoud R T Soc Aot

Condition: like new (used), Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Pgodegl Nlmepfx Ac Ajt Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Year of construction: 2011, rofile width max 140 mm Profile height max 190 mm Stave length max 6.500 mm Drilling aggregates 2 Number of milling spindles 3 For aluminium Number of clamping devices 4 Feedrate max 65 m/min Continuously variable feed Automatic feeding Yes Pgodpfxjm H Ud Uj Ac Aet CE marking Declaration of CE-conformity

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen size optional (15 - 40mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for 4-sided segment base + €2,170 net (prevents the slide from jamming. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Over-band magnet + €6,980 net - Control for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: Pgodpfxsgmfa As Ac Ajt - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder and we will document the test with photos and videos.

Condition: excellent (used), Year of construction: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Pjdpfx Asw A Nnpec Aegt

Condition: excellent (used), Year of construction: 2001, operating hours: 70,180 h, clamping force: 800 kN, screw diameter: 40 mm, injection pressure: 1,830 bar, injection weight: 205 g, Demag Ergotech Viva 800-400 (144) Description without hopper General information Product Code: 144 Availability: In Stock Year of production: 2001 Brand: Demag Technical data Shot Weight: 205 g Clamping Force: 800 kN Screw dia: 40 mm Injection pressure: 1830 bar Tie bar distance: 400 x 400 mm Platen size: 590 x 580 mm Mould height min.: 250 mm Psdpfjvvtx Tjx Ac Aogt Type of controls: NC4 Language: German Power: 26,1 kW Workinghours: 70180 h Weight: 3600 kg Dimensions: 4,35 x 1,7 m Hopper: No Core pull: Yes

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Pgodpfxsvt Dwbe Ac Aet Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Machine No. 96-2374 with CE certification. Technical specifications: Pgedpfxeyuyruo Ac Aot - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 410 mm Table length: 650 mm Table width: 450 mm Table load capacity: 250 kg Workpiece length: max. 650 mm Workpiece width: max. 450 mm Workpiece height: max. 450 mm Workpiece weight: max. 250 kg Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Accuracy: ±0.015 mm Spindle speed: max. 12,000 rpm MACHINE DETAILS Control system: Siemens Sinumerik 840D Input voltage: 400 V Input current type: Three-phase Pgodpfszzx H Ajx Ac Aet Dimensions & Weight Dimensions (L x W x H): 2,000 x 3,000 x 2,500 mm Total weight: 4,000 kg EQUIPMENT Oil mist separator Spindle cooling (20 bar) Documentation ShopMill function Note: The machine has been regularly maintained electronically and mechanically. New ball screws and linear guides were installed approximately 2 years ago.

Condition: used, maximum load weight: 32,998 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 12/2026, loading space volume: 30 m³, Equipment: ABS, Stock no. 5337 For sale, for rent, or lease with purchase option upon agreement! ONLY approx. 68,000 km driven! Approx. 30m³ D-Tec slurry tanker semi-trailer with 6,000-liter Vogelsang pump / rear-steering axle ---- * Manufacturer: D-Tec * Model: VTT-01 * First registration: 02/2024 * Gross weight: 39,000 kg * Unladen weight (as per registration): 6,002 kg * Payload: 32,008 kg * Axles: 3x Valx axles / 1st axle liftable / 3rd axle rear-steering / disc brakes * Suspension: Air suspension with raising and lowering function * Tyres: 385/65 R 22.5 on steel rims * Colour: RAL 7016 * TÜV (roadworthiness certificate): valid until 12/2026 * Volume: 30m³ / Ø 2.20m / single compartment * Vogelsang rotary lobe pump with soft start * Max. delivery rate: 6,000 L/min * 6" swinging outlet at rear * 8" pipework to the pump with gate valve * 8" * Free-fall to swinging arm in 8" with 8" gate valve * 8" docking funnel on top, lockable with air-operated gate valve * Filling and ventilation with air-operated lock incl. safeguarding for all pneumatic valves * 1" ball valve on the right at the pump * 4" flushing line with two 2.5" nozzles (1x front, 1x center of the tank, with pneumatic valve) * Automatic pump shutoff * Pneumatic control panel, rear left * 1x foldable dome cover * 5 m hose holders left and right (galvanised steel) * Liquid level indicator front left * Operating temperature: 0-60°C * Side access ladder left * Unladen support legs * Single mudguards * Sight glasses at rear (1x top, 1x bottom) * Fifth wheel height: 1.180 m * 24 Volt lighting system * 2x LED work lights at rear * 2x LED work lights left and right * 1st hand (one owner) For sale, for rent, or lease with purchase option upon agreement! German vehicle! German documents! Disclaimer for possible errors in the listing: Podpfx Aoy Srbkec Aegt Despite careful creation of this listing, errors may have occurred in the text or specifications. We accept no liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2013, total width: 2,470 mm, total height: 1,520 mm, color: black, Year of construction: 2013, Equipment: ABS, = Additional options and accessories = - EBS - Lift axle - Air suspension - Disc brakes = Notes = Beautiful 2013 D-TEC FLEXITRAILER 45FT High Cube interchangeable container chassis with SAF axles with disc brakes, ABS/EBS, 1st axle = lift axle, 2x extendable (center and rear) + fixed head, 1x 20FT, 2x 20FT, 1x 20FT center, 1x 30FT, 1x 40FT, 1x 40FT HC, 1x 45FT HC, unladen weight: 5,140 kg, permissible total weight: 43,000 kg, tires 385/65-R22.5 (T: 6/4/4 mm; T: 6/6/5 mm), Dutch registration with valid main inspection (APK) until 26.10.2026 = Further information = Axle configuration Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Unladen weight: 5,070 kg Payload: 37,930 kg GVW: 43,000 kg Pgjdpfx Aozxgxnjc Ajt Functional Body brand: D-TEC FLEXITRAILER Extendable body: Yes Condition Technical condition: very good Optical condition: very good Identification License plate: OX-40-BN Further information Please contact Arne Honingh for more information.

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Psdpfszylxiox Ac Asgt Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: used, Year of construction: 2020, Orangeworks Stainless Steel Mixer Tank Pgodpfxswq Sz Us Ac Aet Qty 2 in stock Capacity 500 LTS Load cells Mixer Ancillary equipment included

Year of construction: 2010, condition: used, The belt dryer is ready for use; a video can be sent via WhatsApp. The dryer is no longer needed. It includes the feed screw, the blower unit, and the discharge screw, meaning it is complete. Pedpeztwhvsfx Ac Aogt

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Pressing force: 130 tons Pgjdpfjzq A Ipjx Ac Aot

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: DAM413, Equipment: CE marking, Cryogenic tunnel freezer 4m Effective freezing length Pgodpfx Ajz D H D Soc Ast 0.3m Effective machine width Total machine length 5m Total machine width *Cooling medium: Liquid nitrogen 2.5-3 Bar *Robust and high-quality design. Construction with 120mm wall thickness. Manufactured from AISI 304 and 316 stainless steel. With fully welded tunnel sections. U-shaped bottom for optimum cleaning. Opening and closing of the freezing tunnel is achieved by pneumatic bellows, providing full access for cleaning and maintenance purposes. *Insulation: Hard foam with an average density of ± 40 - 50 kg/m³. Cryo seal. *5 axially mounted motor units, IP55 rating, fitted with stainless steel extension and propellers. *Product & loading: Product infeed height 120mm. *Proportional controlled LN² injection. *Electrical stainless steel cabinet, IP67 rating. Control panel, IP55 rating. *Power supply: 3x400+N Pe 50Hz 16A. *CE declaration, food certified, user manual, after-sales service. *1 year warranty.

Condition: excellent (used), 5-axis Year of production: 2018 Pgjdeun Rqgopfx Ac Ast Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2190, functionality: fully functional, operating hours: 3,500 h, 5 axis cnc used for many applications with new touch screen set up and adopted to new air cooled spindle, tool changer and renishaw possible Pgedpszhaqcjfx Ac Aet

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Working area, Y-axis: 1,250 mm Max. panel thickness: 85 mm Podpez En Afofx Ac Aegt Number of controlled axes: 3 Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Milling unit Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 9 kW Automatic tool changer: yes Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Control system: PC Control Programming software: WoodWOP 5.0 EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: DAM558, Equipment: CE marking, Box Freezer: Ultra-low temperatures of -100°C achieved by direct injection of liquid nitrogen. Door opening: 0.7 x 2 m, usable internal space: W: 0.7 x D: 1.45 x H: 2 m Pjdez D Dftepfx Ac Ajgt Machine dimensions: W: 1.725 m, D: 1.795 m, H: 2.285 m LN² connection: 1/2", LN² supply pressure: 2.5-3 bar Power supply: 3 x 400V + N + PE, 16A Material: Stainless steel 316, thickness 1.5 mm, T.I.G. fully welded box Finish: Exterior polished K320 Interior: 2B Insulated with hard foam, average density +/- 40-50 kg/m³ Slightly angled door opening for easy loading. 4 x M16 lifting points Passive exhaust connection: 250 mm Fan speed adjustable with a variable frequency drive. Siemens HMI controls with multiple recipes. Documentation: CE declaration, food-grade certified, electrical diagram, user manual, after-sales service. 1-year warranty.

Condition: good (used), Clean air extraction system Pgedpfx Ajrb D Njc Ast Used machine, in good condition Images to follow mobil Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h, 400 V

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Precision Lathe RML 1640V – Comprehensive Equipment Description: This machine is ideally suited for tool manufacturing, training workshops, maintenance departments, as well as precise single-piece and small-batch production. Pjdpjyudwbefx Ac Aegt Features: - 3-axis digital readout - 3-jaw chuck with internal and external jaws - Coolant system - Removable gap bridge - Hardened and ground bedways - Fixed steady rest - Live center - Multifix quick-change toolpost - Slip clutch for feed overload protection - Foot brake - Machine work light - Bed stop with micrometer adjustment - Toolmaker’s accuracy according to DIN 8605 - Two-tone paint: Blue (RAL 5012) / Grey (RAL 7032) - CE conformity - German operating manual and spare parts list Technical Data: Swing over bed: 410 mm Swing over cross slide: 264 mm Swing in gap: 533 mm Distance between centers: 1000 mm Bed width: 260 mm Spindle bore: 52.5 mm Spindle mount: D1-6 DIN 55029 Cross slide travel: 220 mm Spindle speeds: 20 – 2500 rpm Number of speed ranges: 2 Speed range 1: 20 – 400 rpm Speed range 2: 400 – 2500 rpm Motor power: 3.7 kW Tailstock quill diameter: 52 mm Tailstock quill travel: 152 mm Quill taper: MT 4 Machine weight: 1400 kg Thread cutting range: Metric: (39) 0.2 – 14 mm Whitworth: (45) 2 – 72 TPI Diametral Pitch: (21) 8 – 44 DP Module: (18) 0.3 – 3.5 MOD Other: Inspection by appointment. The machine is ready for immediate use.

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 018-2310-0001, Sono TEK ultrasonic spray coating system with conveyor belt or workpiece carriage - 6-head spray system - Was set up for anti-fingerprint / hydrophobic spray coating for display glass, but has seen little use as product launch was postponed - Conveyor approx. 2 m - Flexible gantry design, allowing spray width to be easily and precisely adjusted - Siemens Simatic touch panel Pgsdpfx Acjyl Rr Hj Aet - Commissioning / installation support can be provided - Documentation available System is dismantled and ready for transport.