Used Dörries Cte 320/3400 for sale (4,124)

Condition: used, swing diameter 2000 mm turning height 1800 mm Control Siemens Sinumerik 840 Dsl turning speeds range 2,8-315 U/min cross rail adjustment - vertical 1200 mm cross rail adjustment - horizontal +/- 1150 mm 1500 mm bit feeder section 240 x 240 mm Minimum immersion diameter 340 mm cutting capacity 50 kN max. torque on the faceplate 50000 Nm speed range step 1 2,8 - 80 U/min speed range step 2 12 - 315 U/min Max. clamping weight 12000 Kg power capacity faceplate 105 kW weight of the machine ca. 33 t dimensions of the machine ca. 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min; 0.01–50 mm/rev Pgedpfx Ahjy Dvlqslsl - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Overhaul: - Extensively overhauled in 2012 by Siemens Industry Munich - Items overhauled included: control system, cabling, motors, measuring systems, etc. - Further information can be found in the PDF

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: K 240/50 662, turning height: 2,150 mm, workpiece weight (max.): 20,000 kg, turning diameter: 2,200 mm, faceplate diameter: 2,000 mm, No reserve price – guaranteed sale to the highest bidder! The machine was overhauled between 2012 and 2016! 2012: - Digital measuring system (Positip 880) installed - New power clamping band - New selector switches 2015: - Directional clutches on the X-axis replaced - Gibs and nuts on both supports re-adjusted 2016: Pgodpfx Asyw N Ufohlel - All clutches in the main drive re-ground - All bearings in the main drive replaced, including the power supply unit - Drive shaft replaced - Several sets of discs - New spur gear, etc. TECHNICAL DETAILS Turning height: 2,150 mm Swing diameter: 2,200 mm Faceplate diameter: 2,000 mm Max. workpiece weight: 20,000 kg X-axis travel: 1,225 mm Rapid traverse X-axis: 2 m/min Rapid traverse Z-axis: 2 m/min Spindle speed: 3 – 125 rpm MACHINE DETAILS Number of tool turrets: 1 Total weight: 26,000 kg EQUIPMENT Documentation/Manual

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,446 h, load capacity: 200 kg, empty load weight: 2,050 kg, construction height: 2,000 mm, total length: 4,250 mm, arm reach: 7,500 mm, construction width: 800 mm, working height: 17,000 mm, Track-mounted aerial work platform Speed class: 3 Pgsdpoyuly Defx Ahlsl Technical condition: good Battery condition: good Description: The CTE Traccess 170 is a compact and versatile track-mounted aerial work platform for demanding work at height – particularly in areas with limited access, sensitive surfaces, or challenging terrain. Thanks to its narrow design, the machine is ideally suited for courtyards, narrow passageways, churches, halls, or outdoor work. With a working height of up to 17 m and a high lateral reach, the CTE Traccess 170 enables safe and flexible working even in hard-to-reach locations. The tracks ensure high off-road capability and a secure stance on a wide variety of surfaces. - Working height up to 17 m - High lateral reach - Narrow design for limited access - Tracks for challenging terrain - Ideal for assembly, maintenance, and tree care work - Compact, flexible, and easy to operate - Safe working at any height Further information and a non-binding inquiry can be found on our website. In addition to this machine, we offer other aerial work platforms, telehandlers, and forklifts for rent and sale. Our machines are continuously serviced and inspected. - Rental & sales - Service & repair - Lease purchase & financing options - Purchase of used machines Our team will be happy to provide you with competent and personal advice.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 430 h, load capacity: 250 kg, empty load weight: 2,750 kg, construction height: 1,995 mm, fuel type: gasoline, total length: 5,041 mm, drive type: Benzin, arm reach: 9,800 mm, construction width: 1,470 mm, working height: 18,200 mm, Track-mounted aerial work platform Podpfx Ajwx Tx Dshlsgl Technical condition: very good Battery condition: very good Description: The CTE TRACCESS 180 is a compact track-mounted aerial work platform for working at height in confined spaces, on sensitive surfaces, or in challenging terrain. With a working height of up to 18.2 m, a high lateral reach, and its track system, this machine is ideal for assembly, maintenance, and tree care work, even in hard-to-reach locations. Compact, all-terrain capable, and easy to operate. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this machine, we offer aerial work platforms and telehandlers for rent and sale. Our equipment is regularly serviced and inspected. Rental, sales, service & repair. You can get everything from a single source with us. Lease purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 217 h, load capacity: 200 kg, empty load weight: 2,900 kg, construction height: 2,010 mm, fuel type: diesel, total length: 5,337 mm, drive type: Diesel, arm reach: 12,000 mm, construction width: 780 mm, working height: 23,000 mm, Track-mounted aerial work platform Technical condition: very good Description: The CTE TRACCESS 230 Diesel is a powerful track-mounted aerial work platform for working at great heights in confined spaces, on sensitive surfaces, or in difficult terrain. With a working height of up to 23 m, a high lateral reach, and its track system, this machine is ideally suited for assembly, maintenance, and tree care work on a variety of surfaces. Compact, all-terrain, and easy to operate. You can find more information and submit a non-binding inquiry on our website – safe working at any height. In addition to this machine, we offer aerial work platforms and telescopic loaders for rent and sale. Our machines are regularly serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease-to-own, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personalized advice. Pgsdpfxowx Txwo Ahlol

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 185 h, load capacity: 250 kg, empty load weight: 2,782 kg, construction height: 1,998 mm, fuel type: diesel, total length: 5,324 mm, drive type: Diesel, arm reach: 8,500 mm, construction width: 780 mm, working height: 20,000 mm, Track-mounted aerial platform Technical condition: very good Battery condition: very good Pgjdpfx Aowx Txqehlol Description: The CTE TRACCESS 200 diesel is a compact track-mounted aerial platform for working at height in tight spaces, on sensitive surfaces, or in difficult terrain. With a working height of up to 20 m, a lateral reach of up to 8.5 m, and its track system, this machine is ideal for assembly, maintenance, and tree care work, even in hard-to-reach locations. Compact, all-terrain capable, and easy to operate. You can find more information and submit a non-binding inquiry on our website – Safe working at any height. In addition to this machine, we offer aerial platforms and telescopic handlers for rent and sale. Our machines are continuously serviced and inspected. Rental, sales, service & repair. You can get everything from a single source. Lease-purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, faceplate diameter 1200 mm swing diameter 1400 mm turning height 1250 mm cross rail - adjustment 600 mm work spindle adjustment 750 mm total power requirement 69 kW weight of the machine ca. 25 t reconditioned The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Pgsdpsyq Sy Njfx Ahljl More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1994, faceplate diameter 1250 mm swing diameter 1400 mm Podsyqvu Depfx Ahlogl turning height 1500 mm Control Siemens type 880T Table load 6000 kg cross rail - adjustment 700 mm Max ram stroke 1000 mm turning speeds 400 U/min transmission ratio 2 Feed 3-8000 mm/min total power requirement 69 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1972, faceplate diameter 3500 mm swing diameter 4100 mm turning height 1400 mm Control Siemens Slide movement horizontal longitudinal 2100 slide adjustment 1300 mm cross rail adjustment 1300 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Pgedpfoyqvpzjx Ahljl

Condition: used, faceplate diameter 1000 mm swing diameter 1400 mm turning height 1100 mm Control Siemens type 840 D Shop Turn Pgjdpfoyqtnuex Ahlol Tool changer 12 Pos. x-travel 2000 mm z-travel 700 mm slide adjustment 1000 mm Rapid movement 6000 mm/min turning speeds 500 U/min total power requirement 62 kW K 234/50822 Machine was overhauled in 2010 by Hering with Siemens 840 DSL Shop Turn The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1981, faceplate diameter 1600 mm swing diameter 2100 mm turning height 1700 mm Control R & D type MTC 4 turning speeds 280 U/min workpiece weight 20000 kg Pgedpfx Ahsyqr Sreljl Tool changer 14 Pos. weight of the machine ca. 2800 t dimensions of the machine ca. 3,7x3,75x5,1 m Machine is modernized The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1983, faceplate diameter 2500 mm swing diameter 2865 mm turning height 3000 mm Control R & D type MTC 4 Rest 2 slide adjustment 1500 mm turning speeds 140 U/min tool change unit 12 Pos. Pgjdjyqr Sfopfx Ahlsl Machine is modernized The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1990, turning diameter 2400 mm faceplate diameter 2200 mm turning height 2100 mm control SIEMENS Sinumerik 850T workpiece weight 17 t Tol measurements 32 Werkzeuge Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Pgodpfsygx D Hjx Ahlel Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN

Condition: excellent (used), DOERRIS SCHARMANN Manual Pendant Pgedpfew Iqz Tjx Ahljl Machine Hand Pendant Machine Control System

Condition: new, TECHNICAL DATA: - Base area: 16,000 x 20,000 mm [other versions available] - Grid spacing: 4,000 x 5,000 mm - Finished floor level: 3,340 mm - Clear height: 3,000 mm [customizable] - Flooring: 38 mm particle board P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice, powder-coated - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Cross bracing - Flooring - Fastening material EXAMPLE PRICES: 20 m² | Area: 4,000 x 5,000 mm | €2,135.00 net, plus transport costs and VAT 40 m² | Area: 4,000 x 10,000 mm | €3,825.00 net, plus transport costs and VAT 60 m² | Area: 4,000 x 15,000 mm | €5,435.00 net, plus transport costs and VAT 80 m² | Area: 4,000 x 20,000 mm | €7,215.00 net, plus transport costs and VAT 40 m² | Area: 8,000 x 5,000 mm | €3,725.00 net, plus transport costs and VAT 80 m² | Area: 8,000 x 10,000 mm | €6,519.00 net, plus transport costs and VAT 120 m² | Area: 8,000 x 15,000 mm | €9,695.00 net, plus transport costs and VAT 160 m² | Area: 8,000 x 20,000 mm | €12,755.00 net, plus transport costs and VAT 120 m² | Area: 10,000 x 12,000 mm | €8,995.00 net, plus transport costs and VAT 80 m² | Area: 16,000 x 5,000 mm | €6,785.00 net, plus transport costs and VAT 160 m² | Area: 16,000 x 10,000 mm | €12,472.00 net, plus transport costs and VAT 240 m² | Area: 16,000 x 15,000 mm | €18,108.00 net, plus transport costs and VAT Psdpfx Ahexpha Ijlsgl 320 m² | Area: 16,000 x 20,000 mm | €23,565.00 net, plus transport costs and VAT Optional accessories: - Railings - Flush wall connection - Staircase - Transfer station - Impact guard - Diagonal supports instead of cross bracing available at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ TAILOR-MADE DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and the intended field of use. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at extra cost. Additional charges depend on the place of delivery and consignment scope, and can be individually requested from us. PAYMENT TERMS Payment terms are to be agreed in the event of an order. The price is quoted as a unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveying technology, mezzanines, textile storage, as well as machines for trade, industry, and crafts. ✅ Four winning pillars – The building blocks for DLK's success – Storage technology | Levelmaker® | Logistics | Solutions

Condition: used, Year of construction: 1972, faceplate diameter 5000 mm swing diameter 6100 mm turning height 2300 mm control Siemens type Sinumerik840D mm 0 55 kW table load 55 t Rest 2 Drehsupporte ram head dimension 340x340 mm Table load 55000 kg turning speeds 280 U/min new control Siemens type Sinumerik 840D in 2015 Accessories and cabinets can be purchased optionally The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Pgjdpfx Aoyqtiljhlsl If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1993, swing diameter 1400 mm faceplate diameter 1500 mm Control Sinumerik 850T work height max. 1400 mm Tool changer 12 stck. Pgedpfx Asvxa Tpshlsl workpiece weight 5 t YEAR OF CONSTRUCTION: 1993 Mechanical overhaul: 2010

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,000 h, mileage: 70,000 km, load capacity: 200 kg, lifting height: 20,000 mm, TRUCK MOUNTED PLATFORMS CTE Zed 20 Year 2018 Working height 20 meters Horizontal outreach 9,50 meters Psdpfeyhdi Dex Ahljgl Basket capacity 200 kg Hours 4000 Km 70.000 Excellent conditions Complete of all documents Inspected and refurbished by CTE service provider

Condition: used, Year of construction: 1992, faceplate diameter 1250 mm swing diameter 1400 mm turning height 980 mm table load 3 t Control Siemens type Sinumerik 880T x-axis 1000 mm z-axis 1000 mm w-axis 600 mm c-axis 360 ° Tool changer 62 Pos. grinding head horizonzal grinding head vertical power capacity - table 69 kW weight of the machine ca. 26 t dimensions of the machine ca. 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Pjdpfx Ahsyt Rzdsljgl possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1981, machine/vehicle number: 78.977, Equipment: documentation/manual, Year of manufacture: 1981 / Year of retrofit: 1996/1997 Control: Siemens 840 C Siemens control for X/Y/Z/W/U/B/V axes Spindle diameter: 200 mm Main motor Siemens: 68 kW Spindle speeds: I gear: 3 - 202 rpm II gear: 180 - 808 rpm X travel: 12,000 mm Y travel: 4,500 mm Z travel: 2,400 mm (supporting sleeve □ 520 mm/travel 1200 mm + W axis 1200 mm) Mount: SK60 (SK50) Facing slide: yes Milling head: 2 units Prepared for CNC rotary table (4th axis) Without rotary table and clamping field (available separately) Full documentation Net weight: approx. 140 tons Pjdpfxoqc Umgo Ahlsgl Video available!

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machiningcenter Dörries Scharmann Type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Table indexing C-Axis 0.001° Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Pjdpfxegulkis Ahlsgl Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC 70 pots - system 240.2 Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm CNC controller Siemens Sinumerik 880M Accessories FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993 (2/2)

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machining centre Dörries Scharmann type: VCE 2000/160 Psdpoguk S Sofx Ahlogl Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Table indexing C-Axis 0.001° Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC for turning 59 pots - system 240.2 Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm ATC for SK50 61 pots CNC controller Siemens Sinumerik 880M Accessories FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 5,000 h, mileage: 54,000 km, load capacity: 200 kg, lifting height: 21,000 mm, fuel type: diesel, CTE ZED 21 J Year 2008 Working height 21 meters Horizontal outreach 10 meters Pedpfsx If D Dex Ahlegl Basket capacity 200 kg Hours 5800 Km 54.000 Excellent conditions Complete of all documents Inspected and refurbished by CTE service provider

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: CE358890, Year of construction: 2011, operating hours: 1,610 h, load capacity: 2,000 kg, lifting height: 3,000 mm, construction height: 2,200 mm, fork length: 1,200 mm, overall weight: 3,500 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates collection in the afternoon of 26.06.2026! TECHNICAL DETAILS Rated load capacity: 2,000 kg Fork length: 1,200 mm Lift height: 3,000 mm MACHINE DETAILS Operating hours: 1,610 h Dimensions & Weight Dimensions (L x W x H): 3,300 x 1,000 x 2,200 mm Weight: 3,500 kg EQUIPMENT Charger Pedpfxey D R U Ts Ahlogl External reference: 8

Condition: good (used), mileage: 20,076 km, power: 150 kW (203.94 HP), first registration: 10/2024, fuel type: electric, tire size: 225/75R16, axle configuration: 4x2, wheelbase: 4,320 mm, fuel: electricity, color: silver, driver cabin: day cab, gearing type: automatic, suspension: steel, number of seats: 3, total length: 6,970 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 4,300 mm, loading space width: 1,780 mm, loading space height: 1,910 mm, Year of construction: 2024, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - None - LED lamp - Manual - Radio/cassette - Rearview camera - Lane keeping assist - Fabric - Blind spot sensor - Partition = Notes = Configuration: 4x2, Tare weight: 2934 kg, Gross vehicle weight: 3500 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Auxiliary heater, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: Silver, Metallic, Rearview camera, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 150 kW (201 hp), Fuel: Electric, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Side wall paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat configuration: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, 320 L3H2 300KmWLTP 81kWh Airco 204Pk LED Automatic Camera BPM-free Mbux10 + Navi DC 115kw-CHARGING!, Spare wheel, Tire type: All-season tires Pgodjyx Ub Tspfx Ahlol = Further Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 225/75R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Unladen weight: 2,934 kg Payload: 566 kg GVW: 3,500 kg Functional Loading area height: 68 cm Maintenance APK (Technical Inspection): Valid until 10.2027 Condition Technical condition: good Optical condition: good Damage: None Number of keys: 2 Financial Information Leasing price: €704 per month (delivery van, 72 months); Ask for more information and conditions.