Used Cormak Mm2315Q 400V for sale (3,021)

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series Itodpfoycg Ryjx Altok 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2026, Complete Compressed Air Set: LUFT 1000 INVERTER Screw Compressor + 500L Vertical Air Receiver + IZBERG N10S Air Dryer This professional compressed air set includes: The LUFT 1000 INVERTER screw compressor (7.5 kW, direct drive, with frequency inverter), A 500-liter vertical air receiver with fittings, The IZBERG N10S refrigerated air dryer. This system is designed for industrial facilities, workshops, and all pneumatic applications that require reliable, efficient, and energy-saving compressed air solutions. The LUFT series by the Polish brand CORMAK represents the latest in pneumatic technology, combining innovation with high-quality materials and components. Low operating costs, user-friendly design, robust construction, and high performance ensure efficient and trouble-free operation even in demanding conditions. LUFT 1000 INVERTER Screw Compressor – Technical Specifications: Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg IZBERG N10S Refrigerated Air Dryer – Technical Specifications: Parameter Value Inlet/Outlet Pipe Diameter (BSP) 1" Max Operating Pressure 10 bar Max Inlet Air Temperature ≤ 38°C Dew Point Temperature 3°C Flow Capacity 1500 L/min Power Consumption 0.58 kW Power Supply Voltage 230V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Refrigerant Type & Quantity R134a, 400 g 500L Vertical Air Receiver – Technical Specifications: Parameter Value Tank Capacity 500 liters Operating Pressure 11 bar Itedpjxa Ah Ujfx Altsk Wall Thickness 4 mm Diameter Ø 600 mm Height 2098 mm Weight 145 kg Number of Connections 6 Connection Sizes 1¼", 2", ½" Dimensions (H x D) 209.8 x 60 cm

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Efficient and precise CNC CORMAK C1325 milling plotter, has a structure made of steel and cast iron, which provides it with adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood or PVC, plexiglass, dibond. Dissecting table with four independent vacuum sections with dimensions of 1300x2500 mm. For each machine, training is included in the price at our headquarters! Itedpfxof Eyqqo Altjk Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1080 kg Machine dimensions 2100 x 3100 x 2200mm Table height 715mm Vacuum pump 5.5kW (included) Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h Highest class security barriers: Optionally available highest quality light barriers The safety zone determined by the sensors does not allow you to enter the machine's operating area A set of barriers ensures the operator's safety Gate height in the Z axis up to 450 mm UCANCAM V11 software(possibility to import files from Corel, Autocad). File import/export, text editor and input Tool set: mills, drills, holders *Unloading and positioning the machine by the customer. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis for 350mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP Control - Digital Data Processing Machine equipped with the function of remembering the last track of the G-code (In the event of a power failure or interruption, it starts working from the last point without losing time and material.) The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2026, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Construction Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Itsdpfjiz A Ezjx Altok Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Linear bearing: trapezoidal rails Spindle High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Table height 715mm Guides linear Transfer toothed rack ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 700 VSD+PM screw compressor is the perfect choice. With a power output of 5.5 kW and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting tools. This model, powered by 400V, is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 700 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution guarantees stable performance and long service life by ensuring direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and control over your processes. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 l/min Air delivery at 6 bar: 690 l/min Air delivery at 8 bar: 650 l/min Air delivery at 10 bar: 650 l/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Iedpfxoycctqe Altstk Weight: 100 kg

Condition: new, Year of construction: 2026, CORMAK PS12E-2000 Panel Saw with Scoring Unit The CORMAK PS12E-2000 panel saw with scoring unit is a solid and precise woodworking machine designed for cutting furniture boards, MDF, HDF, plywood, and other wood-based materials. Thanks to its dual cutting system (main blade + scoring blade), the machine guarantees clean cutting edges without chipping or splintering, which is essential in furniture production and interior finishing applications. Main Advantages of the Machine Dual cutting system: main blade + scoring blade – eliminates the risk of laminate tearing and ensures clean edges. Stable cast iron worktable – provides precision and rigidity even under heavy loads. Large 2000 mm sliding table – designed for cutting large-size workpieces. Powerful 3.8 kW (400V) motor – enables effortless cutting of even hard materials. Adjustable cutting angle up to 45° – allows precise bevel cuts without loss of accuracy. Precision side fence – equipped with an accurate scale for repetitive cutting operations. Dust extraction system – efficient removal of sawdust improves cleanliness and workplace safety. Complete standard equipment – includes scoring blade, measuring guides, blade guard, angle indicator, and accessories. Construction and Technology The construction of the CORMAK PS12E-2000 panel saw is based on a precision-ground cast iron table and a bearing-mounted sliding table with support, ensuring stability and full control over the material during cutting. High-quality guide rails provide smooth and accurate table movement, while the reinforced machine body minimizes vibrations. The ergonomic front-mounted control panel allows convenient adjustment of cutting height and blade angle. The blades are driven by a 3.8 kW motor, providing sufficient power reserve for demanding applications and difficult-to-cut materials. Precision and Work Efficiency The CORMAK PS12E-2000 panel saw with scoring unit has been designed for high repeatability and accuracy. Cutting depth and angle adjustments are carried out using locking adjustment knobs, increasing both safety and operator comfort. High blade speeds, including up to 5800 rpm for the scoring blade, enable fast and clean cuts without burning or damaging the material surface. Itedpfxsvuf Tms Altek Applications This panel saw is designed for: Professional woodworking workshops Furniture manufacturing companies Custom woodworking businesses Prototype production departments It is ideal for daily production, dimension cutting, and complex projects requiring precise angled cuts. It is the perfect solution wherever cutting accuracy, edge quality, and reliability are essential. Standard Equipment Main cutting blade Scoring blade Crosscut fence Rip fence Blade guard Table extension Mitre fence Blade angle indicator Eccentric clamp User manual EC Declaration of Conformity Technical Specifications Parameter Value Sliding table length 2000 mm Cutting width on right side 1260 mm Saw blade tilt range 45° Cutting height at 45° 80 mm Cutting height with 315 mm blade at 90° 100 mm Cutting height with 300 mm blade at 90° 95 mm Maximum main blade size 315 × 30 mm Maximum scoring blade size 100 × 20 mm Main blade speed 4500 rpm Scoring blade speed 5800 rpm Motor power S1/S6 3.8 kW / 6.1 HP Power supply 3-phase, 400V Weight 275 kg Warranty 12 months Technical documentation (DTR) Included CE Declaration Yes

Condition: new, Year of construction: 2026, CORMAK MM950 Belt Edge Sander Key Features Large 850 × 300 mm main worktable provides stable support for workpieces. Adjustable sanding angle up to 90° allows the working position to be adapted to different sanding applications. Additional 340 × 340 mm worktable makes sanding smaller workpieces easier. Rigid steel frame ensures stable material guidance and consistent sanding results. Maximum 3 kW motor power delivers efficient performance under heavier workloads. 150 × 2515 mm sanding belt provides a large working surface for material processing. 110 mm diameter sanding roller expands the machine's range of applications. Ø120 mm dust extraction port allows connection to a dust collection system. Stable 800 × 400 mm base minimizes unwanted machine movement during operation. 400 V power supply is suitable for professional workshops and production facilities. 16 A, 5-pin power plug ensures convenient electrical connection. Applications Iodjznttkspfx Altotk The CORMAK MM950 Belt Edge Sander is suitable for: sanding straight edges, leveling and smoothing surfaces, sanding workpieces at adjustable angles, finishing edges and surfaces, preparing components for further machining, workshop and production applications requiring a large sanding area. The machine is an excellent choice for woodworking shops, manufacturing workshops, craft studios, and companies processing workpieces of various sizes. Standard Equipment Main worktable – 850 × 300 mm Additional worktable – 340 × 340 mm Sanding belt – 150 × 2515 mm 110 mm sanding roller Ø120 mm dust extraction port Heavy-duty steel stand 16 A, 5-pin power plug Technical Specifications Model CORMAK MM950 Main table dimensions 850 × 300 mm Additional table dimensions 340 × 340 mm Maximum sanding angle Up to 90° Maximum motor power 3 kW Power supply 400 V Sanding belt dimensions 150 × 2515 mm Dust extraction port diameter 120 mm Roller diameter 110 mm Power connector 16 A, 5-pin Base dimensions 800 × 400 mm Overall dimensions 1600 × 460 mm Weight 172 kg

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Integrated Refrigeration Air Dryer The LUFT series screw compressor from the Polish brand CORMAK represents the latest advancements in pneumatic technology, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features: Innovative Design Our compressors are built on advanced engineering and European manufacturing precision. The solid construction, enhanced with modern components, ensures long-lasting and reliable operation in all working conditions. Integrated Refrigeration Dryer The COMPACT version with an integrated dryer offers space-saving and comprehensive functionality in a single unit. The built-in refrigeration dryer ensures clean and dry air, protecting your system from corrosion and damage. Quiet Operation & Comfort Designed with attention to detail, our compressors operate with exceptionally low noise levels. Effective soundproofing and vibration reduction systems provide a comfortable working environment, enhancing operator focus and well-being. Smart Control System The intuitive MAM electronic control panel acts as the command center of your compressor. It allows precise monitoring of parameters, scheduling of maintenance, and quick diagnostics, ensuring system stability and protecting key components. Tailored to Your Needs We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems to perfectly match the specific requirements of your industry. Dynamic Operating Pressure Automatic pressure adjustment ensures that the compressor delivers exactly the amount of compressed air needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable Development We prioritize environmentally friendly solutions. The energy-saving technologies used in our compressors not only reduce your energy bills but also minimize environmental impact. The heat recovery option allows for maximum energy utilization. Integrated Refrigeration Dryer – Top-Level Air Quality Two-Stage Drying System: Provides effective moisture removal and protection for your pneumatic system. Variable-Speed Fan: Automatically adjusts cooling performance to match working conditions, optimizing energy consumption. Dual Filtration System: Includes a pre-filter with 3.0 µm precision for removing larger solid contaminants, and a fine filter with 0.1 µm precision that captures oil aerosols and other fine particles, ensuring the highest level of air purity. Itodpfx Aloxmg A Aotsk Technical Specifications Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Air Delivery (0–6 bar) 990 L/min Air Delivery at 6 bar 950 L/min Air Delivery at 8 bar 950 L/min Air Delivery at 10 bar 930 L/min Outlet Connection Diameter (G) 3/4" Dimensions (L x W x H) 1320 x 650 x 945 mm Weight 320 kg

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Itsdpjudi Uzofx Altsk Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: new, Year of construction: 2026, Set including LUFT 1500 Inverter Screw Compressor, 1000L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer Itsdpsxnyhuofx Altek The LUFT 1500 screw compressor with inverter, combined with a 1000-liter vertical compressed air tank equipped with fittings and the IZBERG N20S air dryer, provides a complete, efficient, and modern solution for compressed air systems. The LUFT series compressor from the Polish brand Cormak represents the latest technology in pneumatics, combining high-quality materials and precision-engineered components. Its low operating costs, ease of maintenance, ergonomic and durable design, and high performance guarantee reliable and efficient operation in industrial applications. Technical Specifications – LUFT 1500 INVERTER Motor Power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Connection (BSP): 1" Maximum Operating Pressure: 10 bar Max. Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Flow Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Dimensions (L × W × H): 420 × 700 × 690 mm Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 1000L Vertical Air Receiver Tank Capacity: 1000 liters Working Pressure: 11 bar Wall Thickness: 4 mm Diameter: Ø 808 mm Height: 2300 mm Weight: 230 kg Number of Connections: 6 Connection Sizes: 2", 1/2" Dimensions: 230 × 80.8 cm

Condition: new, Year of construction: 2026, CORMAK C2141 ATC PREMIUM CNC Router (2100 × 4200 mm) 1. Worktable Sectioned vacuum worktable with four independent vacuum zones, manufactured from rigid and durable HPL panels. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces of various sizes. The worktable surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. 2. HQD Spindle High-performance 9 kW brushless HQD spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system, ensuring reliable operation and low maintenance. 3. Drive System Energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, delivering excellent machining quality while maintaining high feed rates. Brushless servo motors drive the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for maximum durability and long-term reliability. Professional HIWIN linear guide rails are installed on all axes and undergo strict quality inspection. A centralized automatic lubrication system continuously lubricates the linear bearing blocks and ball screw, minimizing maintenance requirements and extending component life. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining, resulting in improved machining accuracy and superior surface finish. Itedpsvupu Uefx Altok 5. 8-Position Automatic Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump & Dust Extraction Hood (Optional) Four independent vacuum zones for efficient workpiece clamping. 7. Industrial Control System & Software Equipped with the NK-105 G3 CNC control system. Compatible with the latest CAD/CAM software solutions. Optional UCanCAM V13 software available in Polish/English versions. Technical Specifications Working Area 2100 × 4200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump Optional 2 × 7.5 kW vacuum pump Software Optional UCanCAM V13 (Polish/English version) Machine Dimensions 5070 × 2870 × 1900 mm Machine Weight 3350 kg

Condition: new, Year of construction: 2026, CORMAK PT260Q 400V Planer Thicknesser – Professional Woodworking Machine The CORMAK PT260Q 400V planer thicknesser is a professional woodworking machine combining the functions of a surface planer and thickness planer. Equipped with an advanced integrated table system and a powerful three-phase motor, it ensures reliable operation and high precision when processing both hardwood and softwood. The machine is an ideal solution for carpentry workshops, production facilities, and any environment where efficiency, repeatability, and machining accuracy are essential. Main advantages of the machine Three-phase motor S6: 2.6 kW – enables long-term, stable operation with demanding materials without loss of performance. Integrated working tables – an innovative lifting mechanism allows simultaneous table adjustment, eliminating the need for repeated calibration. Stable cast iron construction – a 175 kg machine weight and precisely manufactured components reduce vibrations and ensure accurate planing, even with thin workpieces. Quick function switching – an intuitive mechanism allows fast conversion from surface planer mode to thickness planer mode. Efficient chip extraction system – the Ø100 mm dust extraction outlet improves cooperation with extraction systems and keeps the working area clean. Construction and technology The CORMAK PT260Q is built on a rigid cast iron body with working tables designed for high resistance to deformation. The main tables are connected and adjusted simultaneously, eliminating setup errors typical of traditional folding-table designs. This technology not only speeds up machine preparation but also improves machining accuracy compared with older solutions. The 700 × 150 mm tilting aluminium fence with an adjustment range of 90°–45° enables precise angled processing of wooden elements. Precision and working efficiency The machine is equipped with a Ø75 mm cutter block with three 250 mm long knives, rotating at 4000 rpm, allowing perfectly smooth surface finishing. The maximum working width is 250 mm, while the maximum thicknessing cutting depth reaches 3 mm. The centrally mounted thicknessing table provides accurate height adjustment, and the 6 m/min feed speed ensures efficient processing of larger quantities of material. Standard equipment Ø75 mm cutter block with 3 knives 250 × 30 × 3 mm Integrated planer and thicknesser tables Adjustable aluminium fence 700 × 150 mm (90°–45°) Precision table height adjustment mechanism Ø100 mm dust extraction outlet Operating manual (DTR) CE Declaration of Conformity Technical specifications Parameter Specification Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction outlet diameter 100 mm Fence tilt angle 90°–45° Number of knives 3 Cutter block length 250 mm Knife dimensions 250 × 30 × 3 mm Maximum surface planing width 250 mm Maximum thicknessing width 250 mm Maximum thicknessing height 180 mm Maximum thicknessing cutting depth 3 mm Maximum surface planing cutting depth 2.5 mm Thicknessing feed speed 6 m/min Itodpfx Alsvxh A Sstsk Fence dimensions 700 × 150 mm Machine dimensions (L × W) 1080 × 269 mm Weight 175 kg Motor power S1/S6 S1: 2.2 kW / S6: 2.6 kW Power supply 400 V Operating manual (DTR) Yes CE Declaration Yes

Condition: new, Year of construction: 2026, LUFT 1500 COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT series screw compressor by the Polish brand Cormak represents the latest innovations in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features of the Screw Modules in CORMAK Compressors: Modern Technology and Efficiency The screw modules ensure excellent performance and outstanding energy efficiency. Their design focuses on maximizing output while minimizing energy consumption. Precision and Control Thanks to advanced engineering solutions, the screw modules allow for precise control of the compressed air generation process. This translates into stable pressure and optimal operation of the entire pneumatic system. Durability and Reliability The screw modules used in CORMAK compressors are built for longevity. Their sturdy construction and use of high-grade materials ensure reliability even under harsh industrial conditions, minimizing downtime and the need for frequent repairs. Integrated Refrigerated Air Dryer – Top-Level Air Quality Two-Stage Drying System Effectively removes moisture and protects the pneumatic system. Itjdpfxjxnk Acj Altok Variable-Speed Fan Automatically adjusts cooling capacity according to operating conditions, resulting in energy savings. Dual Filtration System A pre-filter with 3.0 µm accuracy removes larger solid contaminants. A precision filter with 0.1 µm accuracy captures fine oil particles (aerosols) and other impurities, ensuring ultra-clean air. Technical Specifications: Parameter Value Motor Power 11 kW Voltage 400V / 50Hz Output (0–6 bar) 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet Connection Diameter (G) 1" Dimensions 1550 x 740 x 1150 mm Weight 500 kg Manufacturer: CORMAK

Condition: new, Year of construction: 2026, Universal Metal Lathe CORMAK 410 × 1500 mm The CORMAK 410 × 1500 universal conventional metal lathe is a professional machine designed for precision machining of shafts, bushings, threads, cylindrical surfaces, and tapered surfaces. Thanks to its large distance between centers, rigid bed construction, and extended standard equipment package — including a 20 × 20 mm indexable turning tool set and a precision MT4 live center — it provides a complete machining solution for industrial plants and professional workshops. Main Advantages of the Machine Large 1500 mm distance between centers – enables machining of long shafts and large-length components. Rigid cast iron bed and base construction – hardened and ground working surfaces minimize vibration and ensure high machining accuracy. Large 52 mm spindle bore – allows machining of pipes and workpieces with larger diameters. Precision spindle bearing system – reinforced spindle support guarantees long-term accuracy and reliable operation. Removable bed gap section – enables machining of components with diameters up to 580 mm. 3-axis digital readout system – optical scales provide accurate control of carriage positioning. 16 spindle speed ranges – allows precise cutting parameter selection within a range of 45–1800 RPM. Direct thread selection system – enables machining of a wide range of metric, imperial, module, and DP threads without changing gears. Standard Equipment Set of turning tools 20 × 20 mm – 7 pcs. (with indexable inserts) Precision live center MT4 6 vibration isolators 3-axis digital readout system (optical scales) 3-jaw chuck 200 mm with complete set of jaws 4-jaw independent chuck 250 mm Faceplate 350 mm Fixed and follow steady rests Fixed center MT4 Spindle reducing sleeve MK6/MK4 Complete set of change gears Coolant system with pump Work lighting Lubricator, keys, and service tools Safety guards compliant with CE standards Operating manual and CE Declaration of Conformity Technical Specifications Parameter Value 3-jaw chuck 200 mm Maximum turning diameter over bed 410 mm Maximum turning diameter over cross slide 255 mm Maximum turning diameter in bed gap 580 mm Bed gap length 190 mm Distance between centers 1500 mm Center height 205 mm Compound slide travel 145 mm Iodpforh E Smex Altjtk Cross slide travel 225 mm Longitudinal carriage travel 1150 mm Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MT6 Tool post dimensions 100 × 100 × 32 mm Maximum tool size 20 × 20 mm Spindle speeds 16 ranges, 45–1800 RPM Available spindle speeds 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 RPM Metric threads 42 ranges, 0.2–14 mm/rev Imperial threads 42 ranges, 2–72 TPI Module threads 18 ranges, 0.3–3.5 mm DP threads 21 ranges, 8–44 DP Longitudinal feeds 17 ranges, 0.05–1.7 mm/rev Cross feeds 17 ranges, 0.025–0.85 mm/rev Tailstock quill diameter 50 mm Tailstock quill travel 120 mm Tailstock taper MT4 Main motor power (S1/S6) 2.2/2.64 kW or 3.3/3.96 kW Coolant pump power 0.1 / 0.12 kW Machine dimensions (L × W × H) 2440 × 900 × 1660 mm Net weight 1800 kg

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm Itedoudi Unepfx Altjk BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: new, Year of construction: 2026, CORMAK TYTAN 210 × 400 VARIO Universal Conventional Lathe (230 V) The CORMAK TYTAN 210 × 400 VARIO 230 V is a compact universal conventional metal lathe designed for precision machining in workshops, toolrooms, maintenance departments, and small manufacturing facilities. Featuring infinitely variable spindle speed control, a rigid machine construction, and extensive threading capabilities, it delivers excellent machining accuracy and everyday operating convenience. It is a reliable conventional lathe suitable for single-piece production, maintenance work, and prototype manufacturing. Powered by a 750 W motor combined with an electronic variable-speed drive, the machine provides smooth and stable performance even when machining demanding materials. The spindle speed range of 50–2,500 rpm allows operators to select the optimum cutting speed for both rough turning and precision finishing operations. Key Features Infinitely variable spindle speed from 50 to 2,500 rpm 750 W / 230 V motor providing smooth and reliable operation Rigid machine construction for high machining accuracy 4-way tool post for quick and convenient tool changes Capability to cut both metric and imperial threads MT3 spindle taper with 21 mm spindle bore Forward and reverse spindle rotation for increased versatility Hinged spindle safety guard for improved operator protection Integrated chip tray for easy cleaning and maintenance Standard Equipment 3-jaw self-centering chuck Internal and external chuck jaws Change gears for thread cutting MT2 dead center Oil can Chip tray Chuck key and tool post wrench Open-end wrenches and hex keys Spare fuses Operating manual CE Declaration of Conformity Optional Equipment Lathe stand 4-jaw independent chuck Tool holders Live centers Turning tools Tailstock drill chucks Technical Specifications Specification Value Ijdpezqzi Eofx Altotk Swing Over Bed 210 mm Swing Over Cross Slide 135 mm Distance Between Centers 400 mm Bed Width 100 mm Spindle Bore 21 mm Spindle Taper MT3 Spindle Speed Control Variable Spindle Speed Range 50–2,500 rpm Metric Threads 14 Metric Thread Range 0.3–3 mm Imperial Threads 10 Imperial Thread Range 10–44 TPI Longitudinal Feed Range 0.089–0.198 mm/rev Tool Post Type 4-way Compound Slide Travel 65 mm Cross Slide Travel 80 mm Carriage Travel 276 mm Tailstock Quill Travel 50 mm Tailstock Taper MT2 Main Motor (S1/S6) 750 W / 1000 W / 230 V / 1 Ph / 50 Hz Machine Length 900 mm Machine Width 400 mm Machine Height 1120 mm Weight (with stand) 63 kg

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Itsdpfoy Sf Uksx Altek Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: new, Year of construction: 2026, Professional 8-Ton Log Splitter – Robust Construction and Reliable Performance The professional 8-ton log splitter is designed for efficient and safe wood splitting. Its solid construction and high-quality splitting wedge ensure long service life and reliable operation. The machine is designed for splitting logs with a diameter of up to approximately 450 mm. Its stable and durable construction guarantees excellent working results even under demanding conditions. The log splitter is equipped with a hydraulic cylinder featuring an automatic piston return function, ensuring smooth and efficient operation. Device features Side support tables included – make loading and positioning logs easier. Reliable and powerful 230 V electric motor – 3.0 kW power, with the ability to temporarily increase output up to 3.5 kW during heavy loads. Iedpfewymwcex Altstk Safe operation compliant with EU standards – equipped with a two-hand control system for maximum operator safety. Pre-filled hydraulic oil system (4 litres) – ready for immediate use after purchase. Angled splitting wedge – improves penetration into the material and reduces splitting resistance. 4-way splitting wedge included – allows logs to be split into four pieces. Adjustable stop rod – enables setting the wedge return height according to the user's needs. Hydraulic oil level indicator – allows quick monitoring of the oil level. Transport wheels – provide convenient mobility. Operating manual included. Comfortable transport handle – makes moving the machine easier. Recommended hydraulic oil viscosity: HL32. The original, reliable hydraulic pump ensures long-lasting and trouble-free operation. Reliable hydraulic pump! Technical specifications Parameter Value Motor 3 kW (4.1 HP) / 230 V Splitting force 8 tons Maximum log length 520 mm Log diameter range 80–450 mm Wedge travel speed 0.029–0.04 m/s Wedge return speed 0.15 m/s Maximum hydraulic pressure 265 bar Hydraulic oil tank capacity 4 l Overall dimensions 1070 × 800 × 1500 mm Weight 120 kg

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. Itedpfxsmrnk Ej Altsk The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg

Condition: ready for operation (used), Year of construction: 2008, grinding length: 1,600 mm, grinding width: 630 mm, Surface grinder 1600 x 630 M7163x16100, magnetic table size 1600 x 630, machine length 5400mm, depth 2500mm, height 2600mm. Automatic feeds in the X and Y axes. We are the first owners; the machine is used on average for a few hours a month for service-related grinding. Year of manufacture: 2008. Power: 22KW, 60A. Shipping costs are borne by the buyer. We can arrange complete container shipping, including packing and loading. Here are two packing options: Isdpfjy Shzasx Altetk Option 1 Packing on a pallet + aluminum foil and moisture absorbers Requires a 40' HC container. This is the recommended option, as the vacuum foil and absorbers create a protective barrier against moisture and salt. Cost, including loading and securing the machine in the container: 1800 EUR (net). Option 2 Packing without a pallet, aluminum foil, or absorbers. Loading only into a 40' OT container. Cost: 850 EUR (net). Note: In this case, the machine will be more exposed to moisture and salt. Example cost of TRANSPORT ORGANIZATION SERVICE – freight forwarding (all-in), loading Częstochowa, PL, unloading 121001 India, IN, 40 HC, port-to-port, approximately 40 days: 5,050.00 USD.

Condition: new, Year of construction: 2026, CORMAK AT320 is a professional combination lathe and vertical milling machine designed for precision metalworking in manufacturing facilities, toolrooms, maintenance workshops, and repair shops. By integrating both a lathe and a milling machine into a single compact unit, the operator can perform complex machining operations without removing or repositioning the workpiece, significantly improving accuracy and productivity. The machine is supplied with a complete set of 16 × 16 mm turning tools and an MT3 live center. Key Features 2-in-1 machine – combines a universal lathe and a vertical milling machine in one compact, heavy-duty design. Separate induction motors for the lathe and milling machine provide maximum torque and independent operation. 38 mm spindle bore allows machining of larger-diameter shafts and bar stock. Hardened and precision-ground guideways together with a hardened gearbox ensure long service life and high machining accuracy. Thread cutting without changing change gears enables fast setup for different threading operations. Vertical milling head with ±90° tilt and 360° column rotation provides exceptional flexibility for angular and multi-sided machining. Integrated coolant system supplied as standard extends cutting tool life and improves machining performance. Construction and Technology The CORMAK AT320 is built on a rigid cast iron bed with induction-hardened and precision-ground guideways, ensuring excellent accuracy even during long carriage movements. The 1.5 kW lathe motor provides reliable performance when machining a wide range of materials, including carbon steel, stainless steel, aluminum, and brass. The vertical milling head is mounted on a round column, allowing 360° rotation and ±90° head tilt, greatly expanding the range of possible machining operations. Precision and Productivity The machine is capable of accurate longitudinal, cross, and taper turning, as well as metric and imperial thread cutting. Itjdpfxericx Sj Altsk The 12-speed lathe gearbox and 4-speed milling gearbox allow optimal selection of cutting parameters for various materials and machining operations. Standard Equipment Machine stand 160 mm 3-jaw chuck with reverse jaws MT5 and MT3 dead centers Change gears MT3/B16 drill arbor B16 drill chuck (1–13 mm) Coolant system with pump Service tools and oil can Polish user manual CE Declaration of Conformity CE-compliant safety guards Complete set of 16 × 16 mm turning tools MT3 live center Technical Specifications Lathe Specification Value 3-jaw chuck 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Distance between centers 800 mm Bed width 160 mm Spindle bore 38 mm Spindle taper MT5 Spindle speeds 12 ranges (60–1600 RPM) Longitudinal feed rates 0.1–1.4 mm/rev Cross feed rates 0.022–0.3 mm/rev Metric thread range 17 pitches, 0.5–4 mm Imperial thread range 26 pitches, 9–48 TPI Main motor 1.5 / 1.8 kW, 230 V Milling / Drilling Head Specification Value Maximum drilling capacity 20 mm Spindle taper MT3 Quill diameter 45 mm Quill travel 60 mm Head tilt ±90° Head rotation around column 360° Spindle-to-column distance 170 mm Spindle-to-table distance 45–300 mm Spindle speeds 200, 500, 900, 2200 RPM Milling motor 0.55 kW, 230 V Machine Dimensions Specification Value Overall dimensions (L × W × H) 1450 × 650 × 1890 mm Machine weight Approx. 400 kg (±2%)

Condition: new, Year of construction: 2026, CORMAK OE4.0 TUNGSTEN ELECTRODE GRINDER – PRECISE TIG SHARPENING 1–4MM The CORMAK OE4.0 tungsten electrode grinder is a professional device designed for welding shops and industrial workshops, enabling fast, precise and repeatable preparation of TIG electrodes with diameters of 1–4mm. Thanks to its compact, solid construction and adjustable rotational speed, it ensures welding arc stability and the highest weld quality. Main advantages of the CORMAK OE4.0 grinder Versatile operation: one device for angle sharpening, end grinding and cutting the electrode to length. Precise sharpening angles: 15°, 18°, 22.5°, 30° ensuring repeatable results and a stable welding arc. Rotational speed adjustment: adaptation to the electrode diameter ensures process control and minimises the risk of overheating. Compact and mobile construction: easy to carry, ideal for workshops and service work. Low noise level and safety: fully compliant with EU standards, equipped with guards and occupational safety micro-switches. Complete consumables set: spare motor brushes included, increasing reliability and continuity of operation. Construction and technology of the device The CORMAK OE4.0 grinder has been designed for professional preparation of tungsten electrodes. A solid spindle bearing and precisely made housing construction minimise vibrations during operation. The 750W motor with rotational speed adjustment (up to 11,000rpm) allows the sharpening process to be adapted to the electrode diameter, ensuring repeatable results. The grinding disc cooling system and ergonomic electrode mounting guarantee safety and device durability. Precision and work efficiency Thanks to adjustable sharpening angles and the end grinding function, the CORMAK OE4.0 enables tungsten electrodes for TIG welding to be prepared in a repeatable and efficient way. Each electrode is sharpened according to the required specification, which directly translates into arc stability, reduced spatter and savings in welding material. The electrode cutting function allows the electrode length to be quickly adapted to the requirements of the welding station. Application of the tungsten electrode grinder The CORMAK OE4.0 device is used in: TIG welding, both AC and DC, in industrial and production plants, welding workshops, service departments and repair points, industrial installations requiring high precision and repeatability of welds, Iedpfx Alozfgi Hetotk production processes where electrode preparation time and quality are crucial. Standard equipment CORMAK OE4.0 grinder with electrode sharpening, end grinding and cutting functions, Guards and micro-switches compliant with occupational safety standards, Spare motor brushes, User manual and CE and EC conformity documentation. Technical parameters – CORMAK OE4.0 Power supply 230V 50–60Hz Motor power 750W Rotational speed 11,000rpm Electrode diameter range 1.0–4.0mm Minimum electrode length 30mm Sharpening angles 15°, 18°, 22.5°, 30° Disc diameter Ø33.5 × Ø5 × 2.4mm Dimensions 340 × 76 × 76mm Weight 1.6kg

Condition: new, Year of construction: 2026, CORMAK TS315 Table Saw The CORMAK TS315 is a robust, efficient, and precise table saw designed for intensive use in professional woodworking and manufacturing facilities. Equipped with a 315 mm diameter saw blade and a rigid industrial-grade construction, this panel saw is ideal for cutting solid wood, MDF, HDF boards, as well as plastics with similar properties. The powerful motor and extensive working capabilities make the machine suitable for even the most demanding users. Main advantages of the machine 315 mm saw blade – enables cutting materials up to 100 mm thick at a 90° cutting angle. Powerful motor 2.8 kW (S1) / 3.3 kW (S6) – ensures stable operation even under maximum load. Blade speed of 4250 rpm – provides high-quality, smooth cutting results. Sliding format table 1600 × 238 mm – allows comfortable handling of large furniture panels and sheet materials. Stable industrial construction – reduces vibrations and improves machining accuracy. Multi-section table system – table extensions and widening elements increase the total working area. Precision rip fence – ensures repeatable dimensions during serial cutting operations. Design and technology The TS315 table saw has been developed as a professional woodworking saw, combining a heavy-duty structure with carefully designed ergonomics. The machine body is made of high-quality steel, providing maximum rigidity and resistance to deformation during intensive operation. The table system, including the main table, sliding format table, extensions, and widening sections, allows comfortable handling of large workpieces. This significantly improves workflow efficiency and increases operator safety. Ijdpfxovxhm De Altjtk Smooth adjustment of cutting height and blade angle is carried out using precise handwheels, allowing quick setup according to the requirements of each task. All moving components are mounted on bearings, while the guide mechanisms ensure long-lasting and trouble-free operation. Precision and working efficiency Thanks to the large 315 mm blade diameter, the TS315 table saw can cut materials up to 100 mm thick while maintaining excellent accuracy. The blade speed of 4250 rpm guarantees clean, precise cuts without burning or tearing of the material. The sliding format table combined with precision guides enables accurate material positioning and perfect angle cutting, which is essential when processing furniture boards, cabinet fronts, and structural components. The CORMAK TS315 table saw is suitable for: Professional woodworking factories – for intensive daily production work. Furniture manufacturing – precise cutting of large MDF, HDF, plywood, and laminate panels. Craft workshops – as a versatile professional table saw. Specialized production facilities – for cutting PVC, ABS panels, and materials with similar density. Standard equipment Saw blade 315 × 30 × 3.2 mm Mitre gauge Parallel rip fence Sliding table Table extension and widening section Technical specifications Saw blade dimensions 315 × 30 × 3.2 mm Blade speed 4250 rpm Maximum cutting height at 90° / 45° 100 / 75 mm Maximum cutting width with rip fence 940 mm Main working table dimensions 800 × 365 mm Table extension 760 × 600 mm Table widening section 500 × 350 mm Sliding format table 1600 × 238 mm Dust extraction port diameter 100 mm Motor power S1/S6 2.8 kW / 3.3 kW Power supply 400 V Weight 245 kg Machine dimensions 1540 × 2400 × 1300 mm

Condition: new, Year of construction: 2026, CORMAK LBM290 PRO Horizontal Wood Boring Machine – Precision and Versatility for Professional Woodworking The CORMAK LBM290 PRO is a precise and multifunctional horizontal wood boring machine designed for intensive operation in woodworking shops, furniture production facilities, and manufacturing plants. Thanks to its stable construction and extensive standard equipment, the machine ensures maximum efficiency and repeatability of drilling operations, even in the most demanding projects. Main advantages of the machine Mortising attachment – enables precise production of rectangular holes and slots. Double-sided tilting of the working unit – allows drilling at any angle within a range of 0–45°. Four-position spindle head – enables quick changing of drill diameters: 16, 20, 22, and 25 mm. Two end stops – ensure repeatability and accuracy during series production. Left/right spindle rotation – increases drilling versatility and allows adaptation to different types of tools. Easy one-hand operation – an ergonomic lever provides fast and comfortable control of the drilling cycle. Construction and technology The CORMAK LBM290 PRO horizontal boring machine is built on a heavy-duty grey cast iron base, which effectively absorbs vibrations and minimizes machining errors. The integrated extendable worktable (600 × 300 mm) allows convenient processing of larger workpieces. Drilling height and width adjustments are carried out using precise adjustment knobs and guide systems, ensuring smooth and accurate movement of the working unit. The machine is equipped with a professional Westcott drill chuck (0–20 mm) and a complete set of holders for square chisels. Ijdpfx Asvuq Hlsltetk Precision and work efficiency The machine reaches spindle speeds of 1400/2800 rpm, while the maximum drilling depth is 155 mm. A stable and quiet 4.2 kW (S6) motor provides consistent performance even during long operating cycles. Horizontal wood boring machines such as the LBM290 PRO are designed for continuous industrial operation – both for individual production and large series of drilling operations for dowels, hinges, and frame joints. Applications The CORMAK LBM290 PRO horizontal boring machine is designed for: professional woodworking and furniture production facilities, manufacturers of furniture fronts and frame components, workshops specializing in furniture restoration, woodworking technical training centers. Standard equipment Mortising attachment + 1 square chisel 9.5 mm Four-position spindle head 16/20/22/25 mm Westcott drill chuck 0–20 mm Extendable and widened worktable 2 eccentric clamps Angle stop with measuring scale 4 holders for hollow chisels (shank sizes 19/20/28/30 mm) Base with tool storage compartment Left/right spindle rotation Technical specifications Parameter Value Table dimensions 570 × 300 mm Table extension 600 × 300 mm Drilling table height 870 mm Drilling depth 155 mm Drilling width adjustment 300 mm Height adjustment 160 mm Spindle speed 1400 / 2800 rpm Motor power (S6) 4.2 kW Power supply 400 V Two-jaw chuck 0–20 mm Dimensions 570 × 850 × 1340 mm Weight 140 kg

Condition: new, Year of construction: 2026, CORMAK PT265 Planer Thicknesser Isdpfx Alsvxhznetetk The CORMAK PT265 planer thicknesser is a professional woodworking machine designed for intensive and precise processing of solid wood and wood-based materials. The new version of this machine features an innovative connected table system that significantly improves work efficiency and eliminates adjustment errors typical of older designs. With a 2.6 kW motor and a stable construction, the PT265 is a reliable solution for carpenters, craftsmen, and production workshops requiring accuracy, durability, and consistent machining results. Main advantages of the machine New connected table system – synchronized calibration of the infeed and outfeed tables eliminates setup errors and improves machining precision. Stable cast iron construction – the 170 kg machine weight minimizes vibration and increases operating safety. Powerful S6: 2.6 kW motor – provides smooth and efficient processing of hard wood species. Quick conversion from surface planer to thickness planer – fast mode switching reduces downtime. Three HSS knives – ensure precise cutting and excellent surface quality. 265 mm planing width – allows processing of wider workpieces. Design and technology The CORMAK PT265 is a modern woodworking planer thicknesser based on a reinforced construction with cast iron components. The working tables are ground and properly balanced to ensure repeatable accuracy and precision. The innovative connected table system enables synchronized height adjustment – once the table level is set, no further calibration is required when changing the planing thickness. The centrally positioned thickness planer table mounted on a guiding column ensures even material feeding without deviations. Rubber anti-vibration feet additionally reduce vibration, improving component durability and machining quality. Precision and working efficiency Thanks to the 2.6 kW (S6) motor, the machine provides high efficiency while maintaining stable operating parameters, even when processing hard wood species. The Ø75 mm cutter shaft with three knives and a speed of 4000 rpm guarantees a perfectly smooth surface finish. The precise graduated scale allows accurate adjustment of the table height. The aluminium tilting fence (700 × 150 mm), adjustable from 90° to 45°, enables precise material straightening at various angles. Standard equipment Cutter shaft with three HSS knives Aluminium fence 700 × 150 mm Graduated handwheel for table height adjustment Cutter shaft guard Built-in Ø100 mm dust extraction outlet Rubber anti-vibration feet Technical specifications Parameter Value Cutter shaft diameter 75 mm Cutter shaft speed 4000 rpm Dust extraction outlet diameter 100 mm Tilting fence angle range 90–45° Number of knives 3 Shaft length 262 mm Knife dimensions 250 × 25 × 3 mm Maximum surface planing width 265 mm Maximum thickness planing width 265 mm Maximum planing height 180 mm Maximum thickness planing cutting depth 3 mm Maximum surface planing cutting depth 2.5 mm Thickness planer feed speed 6 m/min Fence dimensions 700 × 150 mm Machine dimensions (L × W × H) 1080 × 269 × 1000 mm Weight 170 kg Total motor power S6: 2.6 kW Power supply 400 V Operating manual (DTR) Included CE declaration Yes