Used Butzer - E.v.r. Ess for sale (10,766)

Condition: used, Year of construction: 2025, operating hours: 2 h, Operating hours: 2, First registration: 06/30/2026. New tractor with dealer pre-delivery registration. Standard equipment / technical data: Engine, Rated power (ISO) 82 / 110 kW/hp at 2200 rpm, Max. power 86/115 kW/hp at 2000 rpm, Max. torque 460 Nm at 1600 rpm, Manufacturer / Type: Agco Power / AP 44MBTN-D5, Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5, Controlled turbocharger, SCR catalyst, DOC - diesel oxidation catalyst, SCR particulate catalyst, Hood - single-piece, foldable, Exhaust on the right side in front of the cab, Fuel tank capacity 198 liters / AdBlue 18 liters. Transmission / PTO: 16/16-speed Dyna-4, SpeedMatching, 40 km/h, PowerControl control on the left with load-sensing reversing shuttle, 4-stage load shifting, Permanently cooled wet disc clutches with independent lubrication system, Dual-speed PTO: 540 / 540E / 1000, PTO switching electrically in the cab, PTO START / STOP button on the rear, left fender. Hydraulics / Lift: Open system (OpenCenter) 58 l/min total flow rate, max. 200 bar, 2 control valves with hydraulic couplings: 1x single/double acting, MR + 1x single/double acting, NL, SST, Quick coupler Cat. 3 with balls and catch baskets Cat. 3/2, Lower link control, 5,200 daN maximum lifting force, 2 external lifting cylinders, Adjustable lift struts on both sides and 2 lateral stabilizers, EHR with external control on both fenders. Electrical equipment: Thermo start, 120 A alternator, Battery disconnect switch (electrical), Power supply (12 Volt) for external devices with plug. Axles / Additional weights: Rear axle ND with flange hub, Oil-cooled disc brakes, Height-adjustable automatic trailer hitch, Fenders, external width rear 2.00 m, without extensions, Front weight carrier with integrated drawbar and drawbar pin. Fsdpsyvmq Isfx Alfogf Driver's seat: Low-vibration mounted standard cab with standard roof, ventilation and heating, air conditioning, Integrated safety frame with tinted glazing, Doors on both sides with safety steps, Steering column adjustable in height and inclination, Air-suspended driver's seat with armrests, swivel adapter, safety belt, 2 large telescopic exterior & wide-angle mirrors, Interior mirror, Analog-digital instrument panel (SIS), Radio preparation with antenna and speakers, 4 work lights front and rear on the cab roof, 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders, Rear window wiper / washer system, All-wheel drive front axle with switchable differential lock. Special equipment: With fuel tank protection, PowerControl & Brake on Neutral (clutch effect), 100 l/min, Open Center hydraulic system, Oil flow coupling (58+42 l/min), Leakage oil collector on quick couplings, 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return, 2.5t front lift, 1 hydraulic line set, electrical socket, 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ, Rear fender extensions - wide, Air conditioning, Cab with mechanical suspension, Telescopic exterior & wide-angle mirrors, Co-driver/passenger seat with belt, Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter & armrests, Rear window wiper/washer system, Battery.

Condition: used, axle configuration: 3 axles, first registration: 06/2011, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,260 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 1,320 mm, Year of construction: 2011, Tyre size: 385/55R22,5 Suspension: air suspension Fodsuc Ebzopfx Alfjgf Rear axle 1: Steering Drive: Wheel Empty weight: 11.340 kg Carrying capacity: 23.660 kg GVW: 35.000 kg

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 117591299, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Fsdpfxsznmdvj Alfogf TECHNICAL DETAILS MACHINE DETAILS Weight: 17,600 kg Length without attachments: 2.55 m Length with attachments: 3.70 m Width without attachments: 0.9 m Width with attachments: 1.25 m Height without attachments: 4.15 m Height with attachments: 4.30 m Mains voltage: 415 V AC Frequency: 50 Hz Hydraulic oil: AGIP OSO 46 Thermal oil: AGIP ALARIA 3 EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 157090207, functionality: fully functional, pressing force: 180 t, stroke length: 325 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 180 t Max. hydraulic pressure: 600 bar Cylinder stroke: 325 mm Opening: 325 mm MACHINE DETAILS Control: Electronic control with operating panel/CNC Voltage: 400 V / 50 Hz Fsdpfxeznmb Io Alfsgf Design: Industrial design EQUIPMENT Enclosed safety cabin Hydraulic press system Heating plate press Molding press

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, pressing force: 660 t, overall weight: 28,000 kg, heating capacity: 31 kW (42.15 HP), plate length: 1,900 mm, plate width: 1,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 660 t Fgjdpfx Aleznmbzjfsf Press plate dimensions: 1,900 × 1,600 mm Heating capacity: 31 kW MACHINE DETAILS Electrical data Operating voltage: 400 V Control voltage: 220 V Frequency: 50 Hz Phases: 3 + N + PE Rated current: 160 A Connected power: 108 kW Machine weight: approx. 28,000 kg Design: Lower platen heating press / molding press EQUIPMENT Heated press plates Documentation

Condition: used, Year of construction: 2007, Auction of a drilling line with the following components: PRIESS EIN-Igel (Vertical storage system) PRIESS BAT-DTW-CNC PRIESS BAT-DTW-CNC PRIESS BMA DLS-CNC WANDRES CVT 05/1000 PRIESS Conveyor system TECHNICAL DETAILS Vertical storage system Max. panel width: 500 mm Max. panel length: 1,500 mm CNC drilling machine Machining process: Drilling Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Max. panel thickness: 26 mm Number of drilling units: 4 Total number of drilling spindles: 88 Drilling unit 1 Position: Top Vertical drilling spindles: 23 Drilling unit 2 Position: Top Vertical drilling spindles: 23 Drilling unit 3 Position: Bottom Vertical drilling spindles: 12 Drilling unit 4 Position: Bottom Vertical drilling spindles: 20 CNC drilling and dowel insertion machine (Priess BAT-DTW-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of working areas: 1 Total number of drilling spindles: 49 Number of drilling units: 4 Drilling unit 1 Position: Top Horizontal drilling spindles in X-direction: 8 Drilling unit 2 Position: Top Horizontal drilling spindles in X-direction: 17 Drilling unit 3 Position: Top Vertical drilling spindles: 12 Drilling unit 4 Position: Top Vertical drilling spindles: 12 Insertion unit Number of insertion units: 1 Number of injectors: 10 Number of hoppers: 1 Insertion material: Wooden dowels CNC drilling and insertion machine (BMA DLS-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of controlled axes: 3 Main electric spindle power: 4.4 kW Number of milling spindles: 3 Number of insertion units: 2 Milling spindle 1 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 2 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 3 Position: Top Number of controlled axes: 3 Motor power: 4 kW Grooving unit Position: Top Insertion unit 1 Number of injectors: 1 Number of hoppers: 1 Insertion unit 2 Number of injectors: 1 Fgsdpfx Aljzmtpvefef Number of hoppers: 1 Brushing machine Max. working width: 800 mm Max. machining width: 800 mm Max. machining length: 2,500 mm Brush diameter: 160 mm Roller conveyor Max. panel width: 800 mm Max. panel length: 2,500 mm Panel feed: Motorized belt

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), number of axes: 4, working width: 1,320 mm, milling spindle speed (max.): 24,000 rpm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 1,320 mm Travel, Y-axis: 1,900 mm Max. panel thickness: 170 mm Work table: Cantilever and rail table Number of controlled axes: 4 Travel speed, X-axis: 80 m/min Travel speed, Y-axis: 80 m/min Travel speed, Z-axis: 20 m/min Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 10 Horizontal drilling spindles, X-direction: 4 Horizontal drilling spindles, Y-direction: 2 Total number of drilling spindles: 16 Milling spindle Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 4 Automatic tool changer: yes Motor power: 13 kW Speed: 24,000 rpm Grooving unit Number of grooving units: 1 Position of grooving unit: top Design: fixed, for grooving in the X-direction Max. tool diameter: 120 mm Motor power: 1.7 kW Speed: 7,500 rpm Number of tool magazines: 2 Tool magazine, rear: 12 slots Tool magazine, side: 10 slots Total number of tool change slots: 22 MACHINE DETAILS Machine programming software: BiesseWorks Number of vacuum pumps: 1 Suction capacity per pump: 90 m³/h Total connected load: 17.1 kW EQUIPMENT CE marking Protective structure for machining units with safety sensors Safety system: front safety mats Fjdpfezmtlkex Alfjgf 4 consoles with suction cups for workpiece clamping 1 drilling unit, top 1 milling spindle, top 1 fixed grooving unit, top, for grooves in the X-direction 1 rear tool magazine with 12 slots 1 side tool magazine with 10 slots 1 vacuum pump Front safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8359

Condition: new, functionality: fully functional, Endress + Hauser Proline T-Mass 651-30AB1AD1AAABCA Thermal Mass Flow Meter Fgjdpfx Aljznw Hzefef 6 pieces available Brand new, unused, ex stores stock. Sold as seen.

Condition: excellent (used), functionality: fully functional, REF: MM6472 1 x Fortress Phantom metal detector on inclined conveyor belt with alarm and belt stop on detect reject system. Stainless steel frame mounted on height-adjustable feet. Manufacturer - Fortress Technology. Model - Fortress Phantom. Serial number - K-24417-13183. Aperture dimensions - 550mm wide x 295mm high (clearance). Handing - Inclined, Left to Right. Belt type - Modular plastic. Belt dimensions - 1750mm long x 530mm wide. Electrical requirements - 380 V / 50 hz / 3 phase. Fgsdpfxjzqt Hco Alfjf

Condition: good (used), 1 x Schnitzel Press Fgodpfx Aezq Eh Eolfef

Condition: used, Reportedly unused Sinclair Stainless Fabrications approximately 20,000 litre nominal capacity vertical 316L stainless steel fermenter/bioreactor, approximately 15,000 litre working capacity with (4) zone limpet coil jacket. Unit has a welded dished top and bottom. Internal rated -1/+3barG internal operating at 0-159degC. Internal coils rated -1/+5barG and limpet coils rated -1/+5barG operating at 0-159degC. Mixer Drive = Nominal Speed: 100 RPM; Motor: 55KW 1500RPM 250 IE3 IP55 3PH 230/400V 50HZ; Gearbox Input Coupling: Integral w/Gearbox; External Paint Finish: Standard Paint; Colour: Blue RAL5005 Mounting = Arrangement: Structural Nozzle w/Flange Shaft Seal = Mechanical Seal: Custom Seal - No Bearing Balanced (AES CDM C/SiC/C/SiC-AFLAS(3) - Double Mechanical Seal. ) Mounting Flange = Flange Size: DN400 [16”]; Flange Class: CL-150; Flange Material: 316 Stainless Steel Face & Core Shaft = Shaft Diameter: 4-1/2”; Shaft Extension: 6754 mm; Shaft Material: 316 Stainless Steel Impellers = Impeller #1: 921 mm BT-6; Impeller #2: 959 mm W-4; Impeller #3: 959 mm W-4; Impeller #4: 959 mm W-4; Impeller Material: 316 Stainless Steel Mixer Options = Gearbox with Food Grade Lubricants Design Compliance = Machinery Directive 2006/42/EU Specifications: Capacity: 15,000 L Type of stainless: 316L Internal Pressure: -13 bar Internal Temperature: 0°C Jacket Pressure: -15 bar Jacket Temperature: 0°C Fgjdpfx Aljyln E Rjfof Diameter: 1,800 mm Straight Side: 5,900 mm Legs/Lugs: Mounted on (4) legs Weight: 6720kg Dimensions: 2400mm diameter x 7500mm height

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, operating hours: 16,000 h, 2012 Intermac Master 33c CNC C-axis (for groove) AND T-axis Bed size 1500x3000mm Selection of cups and tools included This CNC can be used for stone or glass. It was originally used as a stone machine but i use it for glass processing. We have two of these machines, we are replacing this one with a larger Master 38.3, machine in perfect working order and can be seen running in our factory right now. Can show buyer the basics on how to use machine. Fjdpfx Alszi T Uqefogf Can also dismantle and load machine for buyer. Can help out with installation. Have more detailed pictures and videos if required

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Fjdeu Hldmjpfx Alfegf Gluing unit Snipping unit Rough trimming unit Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Machine number 94391 Year of construction 2013 CE

Condition: ready for operation (used), Kessler DM 100 / 2 KX three-phase asynchronous motor, serial number: 145479, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fgsdpfx Aoi D Iytjlfof

Condition: new, Kessler stator, complete, D02586 + Kessler rotor, complete, for TSM 099.30 - 632 437, unused, 100% functional, scope of delivery as shown in the photos. NOTE: Please request the costs for packaging and shipping separately! Fsdpfji D Izfox Alfogf

Condition: ready for operation (used), Kessler DMQ .4.AFS main spindle motor, serial number: 129850, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of supply as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please inquire separately about the costs for packaging and shipping! Fodpfji D Iy Ejx Alfsgf

Condition: new, Kessler DMQ .4.AFB motor, mounting hole spacing: 248 x 248 mm, drive shaft diameter: 55 mm, unused with storage marks, 100% functional, scope of delivery as per photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Fgsdji D Iyzepfx Alfef

Condition: new, Franz Kessler DM 100 / 2 LX three-phase asynchronous motor, serial number: 190072, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Fgodpfsi D H S Usx Alfsf

Condition: new, Franz Kessler DMR 100.52.4.R0H three-phase asynchronous motor, serial number: 187242, unused, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Fgjdpei D H Tnjfx Alfsf

Condition: new, Endress + Hauser CPM221-810 transmitter/controller, serial number as shown in the photo, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Fgedpfx Aji D Urxolfsf

Condition: ready for operation (used), Franz Kessler DMQ 160 M-I, serial number: 123458, used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Fedpfxei D H Tgo Alfogf

Condition: used, Year of construction: 1992, x-travel 1400 mm y-travel 1200 mm z-travel 1000 mm Fedpfxsftfcze Alfogf Control ZM total power requirement 0,5 kW weight of the machine ca. 2 t dimensions of the machine ca. 2 x 1,5 x 2 m

Condition: used, Biesse Akron 1440 A - Manual setting - 2017. £16750 + VAT (Ex-Works). Manual setting edgebander with multi profile cutters for thin tape and 2mm tape. Can also apply 8mm Lippings. Fgsdpfxezm U Rns Alfef PLC Control unit. EVA Glue, Pre-Melting unit. Pressure zone. End Trimming Saws. Top & Bottom Profile trimming. 2 x Motor Corner Rounding. Profile scraping. Glue line scraper Buffing. Machine still powered and comes with extraction manifold.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, A very good machine with the benefit of the infeed table and outfeed exit table, which saves significantly on labour. Fgedpfjzifpgex Alfsf

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Specifications Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Fsdpfozf Ivuex Alfsgf Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston