Used Broaching Tool 20 Mm for sale (93,231)

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed Blodpfonzt A Hex Aqtei - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Bedsi Rixkspfx Aqteli Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: good (used), Mechatronic drive system, gearbox, spur gear gearbox, bevel gearbox, worm gearbox, Movegear -Gearbox: Angle gearbox -Translation: 31 : 1 -Shaft: Ø 20 x 50 mm / Ø 30 x 25 mm -Dimensions: 280/270/H210 mm Bedpfey D I Hysx Aqtjli -Weight: 24.5 kg

Condition: good (used), Clamping head, dead-collet chuck, collet sleeves, collet, tool holder, milling chuck, milling tool, clamping sleeves -Clamping sleeves: 17 pieces -Diameter: Ø 6 - 20 mm, see photos -Price/Delivery: complete -Transport dimensions: 230/120/H60 mm -Weight: 2.5 kg Bledewc R Dfjpfx Aqtsi

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 85 mm, 79 pieces -Sizes: Ø 1 - 20 mm, see photos -Price/Sale: complete -Dimensions: 310/200/H150 mm Blsdpfx Asvv Uy Soqtoi -Weight: 13 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 20 mm -Dimensions total: 84/63/H38 mm Blodpfew U Aq Hex Aqtsi -Total weight: 1.1 kg

Condition: good (used), Countersink, countersink, deburring countersink -Sizes: 2x20/2x30/3x45/4x60 mm -Countersink: 90° -Manufacturer: Bilz -Sale: only complete set -Weight: 5 kg Bledpfx Aqeb A Rccotji

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: Stroke 20 mm -Hole Ø 50 mm -Sheet width: up to 993 mm -Punch dimensions: 96 cutouts 22 x 3.5 mm -Individual components: see photos Bljdpfxjyv Aptj Aqtji -Dimensions: 1400/820/H380 mm -Weight: 732 kg

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Middle roller diameter: 320 mm Side roller diameter: 240 mm Blsdpfsv Htniex Aqtji Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Blsdpjiv H Ekofx Aqtsi Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Condition: used, Hydraulic plate shear STEINER, Type HTS 30/20 R Machine No. 315 Year of manufacture 1982 Cutting length 3050 mm Cutting thickness 20 mm Back gauge 800 mm, controlled Motor power approx. 30 kW Power connection 400 volts, 50 Hz - Back gauge with positioning control ELGO - Back gauge adjustment via ball screws - Safety light curtain SICK at the front as a guard - 3 units of material support arms with ball rollers - Electric foot switch - Spare blades - Oil cooler with air heat exchanger Bsdped Hxx Asfx Aqtsli - Very robust machine with a very stable design Space requirement of the base machine L x W x H 4650 x 2610 x 3200 mm Weight of the base machine 27000 kg Space requirement for transport (base machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Total weight 27000 kg Good condition Machine can be inspected in warehouse 37235 Hessisch Lichtenau, test cuts possible. The lower clamps are currently being re-sealed, and the corresponding price adjustment will be made in the next few days.

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 1500 mm / 1x 1000/500 mm each -Transport dimensions: 1000/143/H62 mm -Total weight: 31.5 kg Blsdpfx Aqjyazr Totoi

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 1500 mm / 1x 1000/500 mm each Bedjyazqpjpfx Aqtoli -Transport dimensions: 1000/143/H60 mm -Total weight: 30.8 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 3-piece -Type: PBS-H-SM-09 R=1 88° -Dimensions: see drawing in the photos Blsdpfxeyazmdo Aqtei -Total length: 2505 mm / 835/27/H170 mm each -Transport dimensions: 835/170/H81 mm -Total weight: 48.4 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Dimensions: see drawing in the photos -Length: 490 mm -Dimensions: 490/144/H30 mm Bodpfx Aqjyazhhetoli -Weight: 10.8 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 682 mm / 1x 505/177 mm each Bedpfx Aqjyazgdstoli -Transport dimensions: 682/143/H28 mm -Total weight: 13 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die Blsdpfx Aoiqhg Ujqtei -Manufacturer: Mubea, die Ø 90 mm -Type: Mubea 90 Mounting Ø 50 mm -Dimensions: Ø 90 x 115 mm -Weight: 3.4 kg

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3135 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Blodpfsiivc Djx Aqtsi Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 350 mm Lower roll diameter: 330 mm Side rolls diameter: 250 mm Guaranteed installed power: 14.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 13,000 kg Length: 5,700mm Width: 1,800mm Height: 2,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 20 mm Bending performance (full working width) 15 mm from pipe diameter 1750 mm Rolling capacity (full working width) 14mm Bending capacity (full working width) 12mm from pipe diameter 455 mm Standard equipment: planetary movement of the side rollers Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: good (used), Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders Bledpfx Ajx Tqnrsqtei -Manufacturer: Festo, Round cylinder type DSNU-20-35-PPV-A 1908293 -Stroke travel: 35 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Number: 34 cylinders available -Price: per piece -Dimensions: Ø 27 x 165 mm -Weight: 0.2 kg/pc.

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake Blodpfx Asx S Ec Ieqtji -Length: 250 mm -Width/Height: 65/155 mm -Dimensions: see drawing in the photos -Weight: 7.7 kg

Condition: good (used), Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake Bljdpex S Ea Tefx Aqtei -Total length: 285 mm -Width/Height: 100/120 mm -Dimensions: see drawing in the photos -Weight: 23.7 kg

Condition: good (used), Bending tool, die, lower knife, lower tool, prism tool Bjdjx S D U Aopfx Aqtjli -Tool: for press brake, 7-piece set -Total length: 1053 mm / each 1x 238/58/390/100/270 mm / 2x 75 mm -Width/Height: 97 mm -Weight: 75 kg

Condition: good (used), Bending tool, bending tool, die, upper blade, upper tool, straightening tool Bledpexugm Refx Aqtsi -Bending tool: Length 1760 mm -Tool angle: 83° -Dimensions: see drawing in the photos -Dimensions: 1760/28/H144 mm -Weight: 44.6 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Base jaws for three-jaw lathe chucks -Jaw width: 20 mm Bjdpjq Rg U Eefx Aqtsli -Dimensions: see photo technical. drawing -Total dimensions: 79/60/H40 mm -Total weight: 0.8 kg

Condition: used, Base for bending tool, bending tool, die, lower knife, lower tool, prism tool -Lower tool: for press brake -Total length: 3020 mm -Prism: 20 mm x 90° -Dimensions: see drawing in the photos Bljdpjrdilxsfx Aqtoi -Total dimensions: 3020/65/H110 mm -Weight: 136 kg