Used Alrowa 1"-2" for sale (106,810)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting Gjdpeuxfu Njfx Ag Tsuh ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2008, Technical details: Gjdpfxelqac Ss Ag Tsuh max. workpiece diameter: 29 mm min. workpiece diameter: 26 mm workpiece length: 66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. *

Condition: used, Year of construction: 2010, x-travel 450 mm y-travel 400 mm z-travel 320 mm tool taper HSK 63 spindle turning speed range U/min rapid traverse 30 m/min control GE FANUC Series 16 i System for processing fittings, valve housings, etc. consisting of Guedpetqqqmofx Ag Toh 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, travel paths module 3: X3 / Y3 / Z3 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø, (B-axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device

Condition: used, mileage: 830,000 km, power: 368 kW (500.34 HP), first registration: 10/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, SCANIA S 500 – RETARDER – STAND-UP AIR CONDITIONING – FULL CAB – 2 TANKS – FIRST OWNER – ----VEHICLE HISTORY * GERMAN VEHICLE * FIRST OWNER * VIDEO AVAILABLE UPON REQUEST * WELL-MAINTAINED VEHICLE EQUIPMENT * AUTOMATIC TRANSMISSION * RETARDER * CRUISE CONTROL * DISTANCE REGULATOR (ACC) * LANE KEEPING ASSIST * ACTIVE BRAKE SYSTEM * STAND-UP AIR CONDITIONING * AUXILIARY HEATER * AIR CONDITIONING * FULL CAB * DIFFERENTIAL LOCK * REFRIGERATOR * 2 SLEEPER BERTHS * COMFORT SEATS / HEATED SEATS / AIR CONDITIONING * ONBOARD COMPUTER / NAVIGATION * XENON HEADLIGHTS * RADIO * FRONT AXLE: LEAF SPRING SUSPENSION * REAR AXLE: AIR SUSPENSION * 2 TANKS * ELECTRIC CAB TILT FUNCTION * CAB IN VERY GOOD CONDITION * TIRE SIZE: 385 / 65 R22.5 * REAR: 315 / 70 R22.5 * GOOD TIRES Gusdpfsz R Hhrex Ag Teh * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR EXPORT REGISTRATION, CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER) - 5 DAYS, 15 DAYS, 30 DAYS LICENSE PLATES AND 15 DAYS AUSTRIAN LICENSE PLATES EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. For sales to EU and non-EU countries, a deposit/guarantee of at least EUR 500.00 / EUR 1000.00 will be charged. Subject to change, errors and prior sale! You can find more vehicles on our website. Sales are made exclusively according to our general terms and conditions – see homepage. Important note – important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the purpose of initiating a contract. The information provided here is without guarantee and does not therefore constitute guaranteed characteristics.

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter Goded Scp Topfx Ag Tsuh -Inch thread: 1/4 - 1 inch -Dimensions: 385/120/110 mm -Weight: 5.1 kg

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -Inch thread: 1/4 - 1 inch -Dimensions: 550/120/100 mm Gedpfx Aged Scp Us Teuh -Weight: 4.7 kg

Condition: ready for operation (used), Rexroth MAC090C-0-KD-2-C/110-A-1, 3-phase permanent magnet motor, model number: R911223272, serial number: MAC090-93908, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gedpfx Agez R Iiqe Tjuh

Condition: used, mileage: 280,000 km, power: 115 kW (156.36 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,963 mm, total width: 2,010 mm, total height: 2,660 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typos, and prior sale: Iveco 35S16 SV Box Van (Vehicle 11) Registration Date: 15.08.2019 280,000 km Engine: 2,287 ccm 115 kW / 160 hp Euro 6 Permissible Gross Vehicle Weight (GVW): 3,500 kg Godpfsz R Ha Ijx Ag Tsuh MOT valid until: 09/2027 Unladen weight: 2,397 kg Payload: 1,103 kg Overall length: 5,963 mm x Overall width: 2,010 mm x Overall height: 2,660 mm Auxiliary headlights Tires: 225/55R16, approx. 60% tread remaining on the front, approx. 30/40% on the rear Trailer hitch with ball coupling Double doors, 1/2 and 1/2, at the rear Side sliding door on the passenger side is damaged 6 pairs of lashing eyes in the cargo area Side walls lined with PVC up to a certain height Wooden floor Partition Central locking with remote control 1+2 seats 2 x electric windows, mirrors, heated mirrors Multi-function steering wheel Fully automatic transmission Air conditioning Radio/CD Rearview camera with monitor Cruise control Storage compartment above Last repairs: Service on 06.06.2025: Maintenance service, water cooler GR, new coolant hose, new exhaust turbocharger Service on 23.09.2025: Maintenance service, fuel line, A/C recharge, filter cover, turbocharger solenoid valve, stabilizer link + connecting rod rear axle, front brake calipers reconditioned and front brake pads replaced Service on 24.02.2026: Maintenance service, particle filter regenerated, all injectors new, crankshaft pulley new, valve cover new Price: €6,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, Bag filter housing – 1 size #2 bag – stainless steel 304 Number of bags 1 Bag size #2 Gujdpfxsz N Euue Ag Teh Material Stainless steel 304 Housing dimension D (mm) 204 × 2 Height H (mm) approx. 1405 Max. working pressure (bar) 6 Design pressure (bar) 8 Max. working temperature (°C) 100 Inlet/outlet 1½″ Quick Chuck Seal Silicone Surface Polished Data source Individual drawing Dimensions and operating limits follow the assigned technical drawing. The offered material is stainless steel 304; the drawing also applies geometrically where its title block specifies a different material.

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Gedpfopu R Nvsx Ag Tsuh Good condition

Condition: used, mileage: 225,000 km, power: 115 kW (156.36 HP), first registration: 11/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,109 mm, total width: 2,052 mm, total height: 2,694 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, In accordance with our "General Terms and Conditions," without any warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Iveco 35S16 SV Box Van (Vehicle 509) First registration: 23.11.2022 225,000 km Engine: 2,287 cc 115 kW / 160 hp Euro 6 TÜV (technical inspection) valid until 11/2026 Permissible total weight: 3,500 kg Unladen weight: 2,180 kg Payload: 1,320 kg Overall length: 6,109 mm x overall width: 2,052 mm x overall height: 2,694 mm LED daytime running lights Tires: 225/55R16, approximately 80% tread remaining in the front, approximately 40/30% in the rear Trailer hitch with ball head Double doors, 1/2 and 1/2 at the rear Sliding door on the passenger side 6 pairs of lashing eyes in the cargo area Side walls lined with PVC up to a certain height Wooden floor Partition wall Central locking with remote control 1+2 seats 2 x electric windows, mirrors, heated mirrors Multi-function steering wheel Fully automatic transmission Air conditioning Radio/CD Rearview camera with monitor Guedpfoz R Hazsx Ag Teh Cruise control Storage compartment above Maintenance contract Last repairs: Service on 20.03.2026: Maintenance service, both rear brake calipers new, brake pads new, cabin mounts new, front axle brake disc + pads + brake calipers + wear sensors, 2 new shock absorbers Service on 06.03.2026: Both front axle wheel hubs new, both front axle wheel bearings new Price: €10,500.00 (net) All information is provided without any warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the local court of Ludwigslust for disputes up to a value of €10,000; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: excellent (used), mileage: 807,896 km, power: 375 kW (509.86 HP), first registration: 01/2016, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,890 mm, total width: 2,540 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, parking heater, second fuel tank, = Additional Options and Accessories = - Aluminum fuel tank - Television - Light alloy rims - Mooring space - Radio/CD player - Side mirrors with electric adjustment - Sun visor - Digital speedometer = Additional Information = General Information Cab: simple License plate: 84-BGP-2 Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 7,502 kg Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65 R22.5; Max. axle load: 8000 kg; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Leaf spring suspension Rear axle: Tire size: 315/70 R22.5; Max. axle load: 11,500 kg; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Air suspension Maintenance APK (Technical Inspection): valid until 01/2027 Condition Technical condition: very good Optical condition: very good Gujdpfx Asz R S Rasg Tjh Damage: none

Condition: used, mileage: 104,525 km, power: 120 kW (163.15 HP), first registration: 04/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2027, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2019, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, * First owner * Sliding door on both sides * Rearview camera * Tow hitch * 120 kW engine * TÜV (technical inspection) valid until 2027/9 * Numerous dents and dings Special equipment: Preparation for tow hitch, Audio system: radio with CD player (MP3 compatible) - display integrated, radio remote control on the steering wheel, Bluetooth hands-free system, exterior mirrors electrically adjustable and heated, exterior mirror electrically adjustable, right, floor panel in the cargo area, reinforced rear suspension, metallic paint, sliding door cargo/passenger compartment left and right with glazing, seats in the driver's cab: driver's seat suspended, underride guard, USB connection, interior paneling in the cargo/passenger compartment: half-height Additional equipment: Guodpszrq Dzofx Ag Tjh Airbag, driver's side, exterior mirrors with wide-angle view, turn signals integrated into exterior mirrors, colored, traction control system (ASR), body/superstructure: high-roof van standard, upholstered headrests, fuel tank: 90 liters, cargo area partition, steering column (steering wheel) height adjustable, engine 2.0 liters - 120 kW Blue-HDI FAP CAT, wheelbase 3450 mm, spare wheel in driving condition, low emission according to emission standard Euro 6, sliding door cargo/passenger compartment right, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: double passenger seat, seats in the driver's cab: driver's seat height adjustable, seats in the driver's cab: driver's seat with lumbar support, start/stop system, permissible total weight 3.50 t.

Year of construction: 1995, condition: used, diameter 0 mm workpiece length 1000 mm work piece width 875 mm CNC deburring/brushing cell, tool magazine, SIEMENS 510, 5 axes CNC Controlled Flexible Brushing and Deburring Cell Gjdpfx Aet Hwu Nog Teuh

Condition: good (used), frequency monitor, speed and frequency monitor, frequency monitoring, frequency monitoring -Type: FW4-2-120-400-1 -Un: 120 VAC -Fn: 400 Hz -Number: 1x frequency monitors available -Price: per piece Gedsb A Saqspfx Ag Touh -Weight: 0.8 kg

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Gsdpfx Agoz Dta Tj Tjuh Machine in perfect condition, ready for production. Format: 500x700mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes electronically adjusted via computer 1 cross-cut knife First cassette extended. Continuous speed control via inverter control panel Counter with batching function and folding speed indicator. Rietschle compressor. Raised soundproofing hood. Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Window cassette with control unit. Mobile delivery with continuous speed control.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, Rotor line Loop1 & Loop 2, location: Trnava, Slovakia. We will gladly provide further technical documentation or detailed images upon request. Gsdpfx Aszy E I Djg Touh Inspection and collection are possible by arrangement. Shipping is possible, subject to payment of costs. Subject to prior sale, errors and omissions excepted.

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine Gjdpfx Agsydi A Ij Tjuh -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Condition: good (used), Thread cutting machine, pipe thread cutter, thread cutting head, thread cutting chuck, thread chuck, thread cutting apparatus -Manufacturer: Rems, thread cutting head -Pipe size: 2 1/2 to 4 inches -Spindle bore: dimensions see pictures Gedpjwq Nvisfx Ag Tsuh -Dimensions: 410/400/H340 mm -Weight: 50 kg

Year of construction: 2018, condition: as good as new (ex-display), Grinding wheel Gedpfx Ajf Etr Reg Touh Manufacturer: Comet Type: 3760 1/2 10 C 320 H I 7 V Item number: 5120 Weight: 6.6 kg

Year of construction: 1993, condition: good (used), machine/vehicle number: 931216, Technical specifications: - Edge grinding machine for edge finishing on Gusdpsggbmaofx Ag Tjh - welded boxes, cabinets, safes, etc. - SIEMENS control for indexing and oscillation - max. grinding height approx. 1200 mm - grinding belt dimensions 100 x 2240 mm - grinding belt speed 12 + 24 m/s - grinding unit can be swiveled - 2 magnetic clamping plates - motorized grinding dust extraction - pneumatic connection 6 bar - power supply 400 V - space requirement approx. W 2500 x H 2000 x D 2000 mm - weight approx. 1500 kg

Condition: good (used), Welding rotary device, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary device, gearbox, spur gear gearbox, bevel gearbox Gusdpfx Aozkfr Deg Tsh -Manufacturer: Guso, welding rotary device, container rotary device on a solid base frame -Load capacity: kg -Control: with handheld terminal and foot pedal -Three-jaw chuck: Ø 400 mm, three-jaw chuck bore Ø 130 mm -Speed: 0-2 1/4 rpm Right/Left rotation -Axles: 1 piece -tiltable: No -Height adjustment: Yes -Transmission: switchable 2 stages -Manufacturer Sawa- Gearbox Type -Translation: 1:1000, 1:2508 -Input shaft: Ø 28 mm -Output shaft: Ø 135 mm -Transport dimensions: 2070/1430/H1520 mm -Weight: 1880 kg

Condition: new, Year of construction: 2026, Folding bench ZGR2000/1.2 of company prod - masz locally to the try out and equal to the take. You get professional instruction on the spot. Working width 2140 mm Sheet thickness up to 1, 2 mm Bending angle up to 145° -Forward: 80 mm Gas pressure spring Scala of degree of Velocity for preset bending angle Hanger depth stop Tray for sheets Weight approx. 250kg Gjdpfszfirksx Ag Tjuh Accessories - Rollenschere(bis 0,8mm) 350EUR Shipping within Germany 180EUR All prices are inclusive of value added tax. Certificate CE Warranty: 12 months Pickup Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on demand

Year of construction: 1991, condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW weight of the machine ca. 10 t Workpiece Ø, min./max. 30 - 400 mm Gsdpfx Ajt Hwylog Tsuh Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.

Condition: good (used), mileage: 370,717 km, power: 375 kW (509.86 HP), first registration: 10/2019, fuel type: diesel, fuel: diesel, gearing type: automatic, number of gears: 16, emission class: euro6, Year of construction: 2019, Unladen weight: 12,240 kg Technical condition: good Godpfxezhrd Us Ag Tjuh Optical condition: good Please contact Maarten Busser or Niels Busser for further information.