Used Alliance Heavy-Duty Roller Conveyor for sale (19,107)

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Bjdjh U Rzgspfx Akasdb Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, machine/vehicle number: XL9T0N30004415020, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2005, total length: 13,800 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2005, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 6.370 kg Carrying capacity: 38.630 kg GVW: 45.000 kg Registration number: OJ-20-BV Bdodpfx Akoymbg Rjasb

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm -Saw blade speed: 2x speeds Bsdjy Hu H Espfx Akasdb -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg

Condition: used, machine/vehicle number: XL9T0N30074415040, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2007, total length: 13,800 mm, total width: 2,550 mm, suspension: air, wheelbase: 9,110 mm, color: other, Year of construction: 2007, = Additional options and accessories = - Air Suspension - BPW Axles - Lift Axle = More information = Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 6.540 kg Carrying capacity: 38.460 kg GVW: 45.000 kg Identification Bdodpfxsx Ihhfs Akajb Registration number: OJ-34-ZH

Condition: good (used), workpiece weight (max.): 80,000 kg, grinding diameter: 1,580 mm, grinding length: 7,500 mm, Manufacturer: Farrel Type: 60" x 24" Heavy Duty Year of manufacture: 1960 Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Specifications Metric US Standard Center height 930 mm Grinding diameter Ø 1860 mm Grinding length 7500 mm Grinding stone dimensions 1080 x 180 mm Grinding stone speed 400 - 100 rpm Tailstock 260 x 1250 Mk Coolant system Yes filter Yes Dimensions (estimate) length 13200 mm width 4250 mm height 3200 mm weight 80000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Share on download Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanges / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930mm Grinding diameter Ø: 1860mm Grinding length: 7500mm Grinding stone dimensions: 1080 x 180mm Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 13200mm Width: 4250mm Height: 3200mm Weight: 80000kg Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930inch Grinding diameter Ø: 1860inch Grinding length: 7500inch Grinding stone dimensions:1080 x 180inch Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Bjdpjr Ikvmjfx Akasdb Length: 519.684inch Width: 167.323inch Height: 125.984inch Weight: 176449.6lbs Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill

Condition: used, mileage: 370,777 km, power: 368 kW (500.34 HP), first registration: 04/2017, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2026, color: green, gearing type: automatic, emission class: euro6, Equipment: air conditioning, MAN 33.500 TGS 6x4 First registration: 04/2017 Bdjdpfxoy E U Ias Akasb * Automatic transmission * Unladen weight: 9,725 kg * Wheelbase: 3,250 mm * German registration Inspection possible at any time during our opening hours, test drive by appointment only! For export sales, a deposit will be retained, which will be refunded after receipt of the proof of arrival. Company logos or advertising logos on the vehicles may have been digitally altered on the photos. No guarantee is given for the functionality of the extras. All information provided without warranty - subject to errors, changes, typographical mistakes, and prior sale. Vehicle descriptions do not constitute guaranteed characteristics. Please refer to our Terms and Conditions and make sure you are familiar with them.

Condition: excellent (used), mileage: 534,062 km, power: 537 kW (730.12 HP), first registration: 02/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: semi-automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 7,250 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2020, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, navigation system, parking heater, power assisted steering, retarder, soot filter, spoiler, traction control, trailer coupling, - Alarm - Aluminum fuel tank - Roof spoiler - High beam - Low noise - Speed limiter - Tipping hydraulics - Air conditioning - Refrigerator - Leather interior - Leather upholstery - Air suspension - Air horn - Particulate filter - Radio/CD - Reversing camera - Sleeper cab - Side skirts - Sun visor - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Power take-off (PTO) SCANIA S730 V8 NGS | 8X4 | Heavy-duty 180Tons | 534,062 km | 2020 | Hydraulics | Retarder | Full air suspension | Sliding fifth wheel | King of the road | Leather seats | Heated/cooled seats | Stationary air conditioning | Navigation system | Reversing camera | Refrigerator | Sleeper cab | Air conditioning | ACC | Cruise control | Semi-automatic transmission | Euro 6-D | TÜV/MOT/APK 02-2027 | Belgian truck *Heavy-duty truck direct from Scania factory* Chassis number: YS2S8X40002169225 EXPORT Transport by truck: Austrian transit license plates with insurance for 21 days + €550 Transport by ship: Transport to port (Antwerp/Rotterdam/Amsterdam) + €300 Transport to port Zeebrugge + €400 More about the truck: Video of the truck (YouTube): More about Geerts Trucks & Trailers: YouTube channel Geerts Trucks & Trailers: Instagram Geerts Trucks & Trailers: Facebook Geerts Trucks & Trailers: TikTok Geerts Trucks & Trailers: LinkedIn Geerts Trucks & Trailers: Follow us and subscribe to our channel to see our latest vehicles! No rights can be derived from erroneous information in the advertisement. Geerts Trucks & Trailers always strives to provide correct information. Technical Information Number of cylinders: 8 Engine displacement: 16,353 cc Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steering; Axle brand: GOOD YEAR; Tire tread left: 70%; Tire tread right: 70% Front axle 2: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steering; Axle brand: GOOD YEAR; Tire tread left: 70%; Tire tread right: 70% Rear axle 1: Tire size: 315/80R22.5; Twin tyres; Differential lock; Max. axle load: 13,000 kg; Axle brand: ALBOURGH; Inner left tread: 50%; Outer left tread: 50%; Inner right tread: 50%; Outer right tread: 50%; Reduction: Hub reduction axles Rear axle 2: Tire size: 315/80R22.5; Twin tyres; Differential lock; Max. axle load: 13,000 kg; Axle brand: DEBICA; Inner left tread: 50%; Outer left tread: 50%; Inner right tread: 50%; Outer right tread: 50%; Reduction: Hub reduction axles Bedpfxeyx Acfo Akajdb Weights Unladen weight: 12,828 kg Payload: 29,052 kg Gross vehicle weight: 41,880 kg Interior Upholstery: Leather Maintenance, History and Condition APK (main technical inspection): valid until 02.2027 Technical condition: very good Optical condition: very good...

Condition: good (used), Gravity Flexi Roller Conveyors in Stock 3 Conveyors available Dimensions Conveyor 1, 3240mm closed x 560mm wide double plastic rollers, height 680mm fully adjustable Conveyor 2, 750mm closed - 2160mm fully open x 500mm wide steel rollers, height 8000mm fully adjustable Conveyor 3, 1350mm closed - 4500mm fully open x 500mm wide plastic rollers, height 770mm fully adjustable Bdedpfeyr Nuasx Akajb

Year of construction: 2009, condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer Bdodpfx Aol Tuu Dskasb -Manufacturer: KTS, Heavy-duty transport wagon industrial trailer type DSL with 1-axle turntable steering -Type: DSL -Platform: 2000/1000/H610 mm -Load capacity: max. 5000 kg -Tires: Solid rubber -Overall dimensions: 3560/1000/H610 mm -Empty weight: 300 kg

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer Bedpfjxuqipox Akajdb -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Platform: 5280/1325/H820 mm / 790 mm extendable to 6070 mm -Load capacity: 16 t -Tires: Solideal 425/150-305 solid rubber dual tires -Dimensions when retracted: 7120/1325/H820 mm -Weight: 1760 kg

Condition: good (used), Year of construction: 1972, functionality: fully functional, Swing diameter over bed: 1,650 mm Swing diameter over support: 1,350 mm Turning length: 10,000 mm Bdodpfx Akoy Id U Ujaob Bed width: 1,120 mm Speed range: 1.4 - 280 rpm Max. torque (approx.): 20,000 Nm Workpiece weight between centers, max.: 10,000 kg with 1 steady rest / follower rest: 12,500 kg Equipment 3-axis digital readout: ACU RITE 1 steady rest 1 roller support Chip conveyor: KABELSCHLEPP Chuck guard The machine comes from first ownership, is free from defects, and is in very good condition. In 2023, the headstock was overhauled; among other things, the main spindle bearings were replaced and the main spindle and bull gear (bearing seat) were hard-chromed and reworked. The guideways are also in very good condition for its age.

Condition: new, 20000 kg length 6000 mm width 2450 mm height 697 mm lenkbar lenkbar size of tyres 450 x 300 weight of the machine ca. 2,8 t dimensions of the machine ca. 7,2 x 2,5 x 0,7 mm Heavy load trailer with - double steering Bdjdovn Ux Eepfx Akaeb - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar, Length 1320mm - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us.

Condition: used, Drive 37kw (ca be changed to max. 75 kw) rotor diameter 500 mm Bdedpfx Asy Ib Ekjkasb rotor width 600 mm 5 knive scissor cut, housing hingeable, with 2 stator knives Opening inlet 500 x 600 mm

Condition: used, mileage: 589,000 km, power: 350 kW (475.87 HP), first registration: 03/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, * MB TruckLine CD Radio * BLUETOOTH / NAVIGATION / TELEPHONE * On-board computer with multifunction steering wheel Bdsdey Ikzbepfx Akajb * Camera system with external monitor * Refrigerated box * Automatic climate control * Electric parking air conditioning * Auxiliary heater * Sun visor * Additional headlights * Headlight cleaning system * Adaptive cruise control (ACC) * Emergency brake assist (AEBS) * Cruise control * Lane departure warning (LDW) * Hill-start assist * Retarder * Leaf/air suspension (to be clarified) * Rear axle differential lock * 2nd axle liftable * Tire size front axle: 315/70R22.5 * Tire size rear axle: 315/70R22.5 * Fuel tank: * AdBlue tank: 85 liters * Gross vehicle weight: 28,000 kg * Unladen weight: 8,966 kg * Overall length: 6,458 mm * Wheelbase: 2,650 + 1,350 mm * Safety inspection (SP) due: expired Vehicle number: 12026----Subject to errors and prior sale----Advertising and various decals digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other services, we can offer you the following for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, Complete export processing, Financing arrangements, Application for export license plates, Vehicle transport and transfer, Vehicle registration, Vehicle recovery and transport----YOUR VTS TEAM

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 20,000 W, Description BAISON H13 (12 meters) (20 kW) H-BEAM AND PLATES HEAVY DUTY FIBER LASER CUTTING MACHINE GANTRY TYPE WITH ±90° BEVEL HEAD This machine is also for plates, H, U profiles and different shape + inclined cutting. Technical specifications Laser Power 20.000 W (Raycus) Max. work area (L*W*H) 12.000* strait 2.000* bevel 1.200*600 mm Min. work area(W*H) 150*150 mm Max. Speed 40m/min Max Acceleration 0.4 G X-axis (straight cuts) 2.000 mm X-axis (bevel cuts) 1.200 mm Y-axis 15.000 mm Z-axis 1.000 mm Positioning Accuracy (X/Y) ±0.1 mm/m Repeated Positioning Accuracy (X/Y) ±0.1 mm Power Data 94kw / 151A Power supply 380V/50Hz/3Phases Power Protection Level IP54 Machine Size 20.741*4.373*3.576 mm Machine Weight 8.450kg (Excludes platform) ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 20 kW Special Bevel head ±90° system for cutting H-beams and plates – BOCI Controller system – FSCUT 9200-P Servo motors – VEICHI Reducer – TECHMECH High precision X/Y transmission mode with rack and rails – JT Guide rail – SHAC Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Proportional valve – AVENTICS Electronic Components – SCHNEIDER / PHOENIX Bsdpfjvcb Aasx Akaedb Welded and heat-treated machine bed – BAISON Wireless remote controller Computer with Windows 11 interface, Internet & WIFI Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Operation, maintenance and programming manuals Voltage stabilizer & regulator unit CE mark with safety light barriers - Machines for cutting H-beams profiles and plates - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, Description BAISON V52U(12+12 meters): (12 or 20 kW) FOUR-CHUCKS HEAVY-DUTY TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND UNLOADING SYSTEM 12 meters automatic loading system + 12 meters automatic unloading system (can be equipped in different configurations ex:12+6 meters) This machine is also for profile, tub and different shape. Tube size range: Round tube: φ50-φ500mm Square tube: □50*50-□500*500mm Channel Steel: 5#-50# Angle Iron: 200*200mm I-beam:10#-50# H-beam:100*100mm-500*500mm Laser Power 12.000 W (Raycus) Max. Single Tube Weight 2.000 kg Claw Stroke Full stroke Min. Tail Length 0 mm Max. chuck speed 40 r/min Max Speed 50 m/min Max Acceleration 0.4 G Max. Tube Cutting Length 12.000 mm Ultra-short Tail Material 0 mm X-axis 500 mm Y-axis 12.000 mm Z-axis 500 mm Positioning Accuracy (X/Y) ±0.05 mm/m Repeated Positioning Accuracy (X/Y) ±0.05 mm Power Data 130kw / 225A Power supply 380V/50Hz/3Phases Power Protection Level IP54 Machine Size 29.080*5.000*3.250 mm Machine Weight 28.165 kg(Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 12 kW Laser head with automatic focus – RAYTOOLS BS12K-3D Controller system – FSCUT 5000A Automatic self-centering pneumatic chucks Semi-automatic loading system with chain Servo motors – VEICHI Reducer – TECHMECH High precision X/Y transmission mode with rack and rails – K.H Guide rail – SHAC Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Proportional valve – AVENTICS Welded and heat-treated machine bed – BAISON Wireless remote controller Computer with Windows 11 interface, Internet & WIFI Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Complete CE standard - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Bdodpfx Akjvcbw Deasb Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, total length: 10,000 mm, total height: 3,200 mm, total width: 1,200 mm, overall weight: 1,000 kg, No minimum price – guaranteed sale to the highest bidder! Bidding obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Dimensions of storage platform: 2,700 x 1,100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 10,000 x 1,200 x 3,200 mm Weight: 1,000 kg Internal reference: 74 Bdodpfxsy D Txbs Akasb

Condition: not inspected (used), functionality: unexamined, table length: 1,700 mm, table width: 500 mm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely pickup between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Number of workbenches: 4 Bdsdpfxsy D Tuvj Akaob Surface dimensions: 1,700 x 500 mm Dimensions per workbench: 1,500 x 730 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 7,500 x 1,100 x 2,700 mm Weight: 1,500 kg EQUIPMENT • Welding positioner (Manufacturer: RÖHM) • Balancing scale • Sheet metal cutting device (cutting length: 100 mm) • Collets • Arbor press • Electric engraver • Vice (jaw width: 150 mm) • Abrasives • Sandpaper • Sheet metal shears (Manufacturer: FEIN) • Screws • Drill bits • Number punches • Heavy-duty rack without contents External Reference: 25

Condition: not inspected (used), functionality: unexamined, load capacity per storage section: 2,600 kg, total length: 5,700 mm, total height: 3,500 mm, total width: 1,200 mm, No reserve price – guaranteed sale to the highest bidder! Bdsdpoy D Th Asfx Akajb Placing a bid obligates timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Dimensions per shelf: 2,700 x 1,200 mm Shelf load capacity: 2,600 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,700 x 1,200 x 3,500 mm Weight: 700 kg External reference: 5

Condition: not inspected (used), functionality: unexamined, total length: 5,700 mm, total height: 3,500 mm, total width: 1,200 mm, overall weight: 700 kg, No minimum price – guaranteed sale to the highest bidder! Bidding obligates you to timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Dimensions per storage shelf: 2,700 x 1,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,700 x 1,200 x 3,500 mm Weight: 700 kg Bdsdpfx Akoy D Tg Ssajb External reference: 7

Condition: like new (used), shelf height: 7,800 mm, Used Meta frames for sale. Bsdpfxsy Itvze Akaodb Frame dimensions: - Length: 7800 mm - Depth: 1100 mm Price per unit: €170 plus VAT. Available: 150 units Racking Systems | Sales • Assembly • Dismantling • Repair | MM Lagertechnik We are happy to provide you with a non-binding offer tailored to your specific needs. Our services include: ✔ Sale of warehouse racking ✔ Assembly and disassembly ✔ Repair and maintenance ✔ Purchase of used racking systems ✔ Racking inspections according to regulations ✔ Training in warehouse technology We support you with the planning, delivery, and professional installation of your storage and operational equipment—reliably and efficiently. With our many years of experience in storage technology, we serve: - Small businesses - Medium-sized companies - Industrial enterprises from various sectors With us, you receive everything from a single source—from planning through to implementation. Note: This listing does not constitute a binding offer. After you contact us, you will receive an individual offer tailored to your requirements.

Year of construction: 2024, condition: excellent (used), Axe & Status Tuscan LL550 X 6000 5-Bedway Heavy Duty Lathe With Fanuc Series 0i-TF Plus CNC Control (2024) Running Time 314 Hours. Swing Over Bed Ø950mm. Centre Height Approx 575mm. Distance Between Centres Approx 6,000mm. Carriage Type Box (2 Box Way), Carriage Width Approx 955mm, Cross Slide Width Approx 450mm, Bed Width 990mm. Axis Travel 'X'=480mm, 'Z'=6,000mm. Feed Rate 'X'=0-3,000mm/min, 'Z'=0-3,000mm/min. (2) 'FCG-32C' Ø800mm x Ø320mm Through Bore 4-Jaw Manual Chucks (Front & Back of Spindle). (2) SMW Autoblok 'K4 ZSW' Programmable Steadies, Range Ø52mm - 280mm. Headstock Spindle Nose A2-20. Spindle Bore Ø305mm. Spindle 'X' Axis Servo Motor 3kW, 'Z' Axis Servo Motor 7kW. Spindle Speeds 7-400rpm (Motor 30/37kW), Morse Taper 6. V12-200 Hydraulic 12 Station Turret, 32mm Tool Size, Ø50mm Boring Bar Holder Dimension. Motorised Tailstock Body Movement, Quill Ø165mm, Quill Travel 250mm, MT 6. S/No LL393806057 (2024). Electrical Specification AC220V/50Hz, 3 Phase. Automatic Doors & Full Cover Guard, Motorised Fondex Front & Rear Chip Conveyors, Auto Lubrication & 15-Bar Coolant System, Air Conditioned Electric Cabinet, Halogen Work Lights, Unimag DS-2030-30 Disc Type Oil Skimmer, Yong Teng E04-AL60 kVA Transformer, Plus: (2) Steel Cabinets: (1) 500mm x 500mm x 800mm With 6 Drawers & (1) 1,000mm x 700mm x 1,000mm With 6 Drawers, Full Range Of Machine Manuals, Ø800mm 4-Jaw Manual Chuck (Already Described In Original Detail) With Backing Plate & Spare Jaws, (11) Assorted C6 Capto Adaptors Including Boring Bar Holders, Tool Blocks & Facing Tool Holder,; Boring Bar Attachment (To Hold up to 150mm). Overall Dimensions Approx 8,470mm x 3,050mm x 2,370mm High; Weight Approx 20,500kg. Bdjdpoyw Tkwjfx Akajb

Condition: used, 110 Kw / 150 hp model. Machine has been refurbished previously. Perfect for grinding full frozen blocks etc. Bdodpfx Aksywpcioajb

Condition: used, mileage: 385,300 km, power: 353 kW (479.95 HP), first registration: 08/2015, fuel type: diesel, empty load weight: 7,550 kg, maximum load weight: 10,450 kg, overall weight: 18,000 kg, tire size: 315/70R22,5 156/- L, axle configuration: 2 axles, fuel: diesel, color: other, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel-air, front tire size: 315/70R22,5 156/- L, rear tire size: 315/70R22,5 -/150L, Equipment: ABS, air conditioning, all wheel drive, cruise control, navigation system, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Bdedsy Igvuopfx Akajb

Condition: used, We are offering used crossbeams for sale. TECHNICAL DATA Clear span: 3,600 mm Box section: 125 x 50 mm – Load capacity per pair of beams: 3,700 kg Box section: 130 x 50 mm – Load capacity per pair of beams: 3,800 kg Colour: Narcissus yellow Condition: Used PRICING €25.00 net per unit €29.75 gross per unit TIERED PRICING per unit – Stock: 2,000 units 1 – 50 units: €25.00 net 51 – 100 units: €24.00 net 101 – 250 units: €23.00 net From 251 units: €22.00 net PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, tailor-made quotation. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. Prices are per unit/net price unless otherwise specified in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for trade, industry, and craft businesses. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please feel free to contact us if you have any questions. Bsdpjy H D Ekefx Akajdb Four wins – The building blocks of DLK’s success: Warehouse Technology | Levelmaker® | Logistics | Solutions.