Other

WesttecH Westtech CS 750 Smart / Fällgreifer /Magni Merlo

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Gjdpeppyhtjfx Aayjca Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: excellent (used), We have 3 x identical MR600 mixers for sale. All bought new in 2016, available with optional tote bin hoists. These are in beautiful condition and available to buy straight away. Gcedon Tr Stjpfx Aayea

Condition: used, Year of construction: 2009, operating hours: 6,164 h, Doppstadt IDC000123 - manufacturer: Doppsttadt - model: DZ 750 Kombi Gcodpfxsvy S Dpj Aayea - year of production: 2009 - gross vehicle weight: 46 000 kg - working hours: 6145

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 15 h, load capacity: 6,000 kg, lifting height: 26,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,100 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Diesel, construction width: 2,500 mm, Rotating Telescopic Handler Mast type: Telescopic Gsdpfswbw Hksx Aayeca Transmission: Hydrostatic Speed Category: 20 Condition: New machine Technical Condition: New Front Tyre Type: Pneumatic Front Tyre Size: 18 - 22 Front Tyre Condition: 80 - 100% Rear Tyre Type: Pneumatic Rear Tyre Size: 18 - 22 Rear Tyre Condition: 80 - 100% Description: Thanks to its 3-in-1 design (telescopic handler, crane, and aerial work platform), the MRT 2660 is a highly versatile solution for your handling operations. The MRT 2660 boasts a maximum lifting capacity of up to 6 tonnes and, thanks to its pentagonal boom cross-section and outstanding 360° visibility, ensures precise control of your loads. The 360° continuous rotation enables you to perform various tasks without repositioning the machine. It can be operated on wheels or stabilisers, providing a larger footprint for safe working conditions. Intelligent, ergonomic, and comfortable, the MRT 2660 is ideally suited for construction and industrial applications. This is a powerful and precise tool you won't want to do without! Various attachments including a personnel basket, winch, or bucket are available for this telescopic forklift. 3rd hydraulic circuit, heater, full cab, air-conditioning system, Remote control for both work and drive operations.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, mobile shredding machine - used- rebuilt - Arjes 760 D with magnet on wheelaxle Complete conversion to hydraulic drive Godpfx Aaov Dtfveyoca -- High Performance Shredder -- the most powerful shredder in this size for heavy applications RECONSTRUCTION Machine was completely dismantled and rebuilt by steel construction. Conversion to hydraulic drive system Engine: Mercedes Benz OM 471 Stage 3 350 KW / 477 HP!!! (without AdBlue) - Gearbox: SYNCHRONOUS: 2x125,000NM - Hydraulics: Bosch Rexroth -- 285cbcm pump + 2x 215cbcm hydraulic motors - Control: NEW - Hydraulic lines: NEW - Radio: NEW - Shafts / tools: NEW (Combined tool for wood, garbage, light scrap) Machine is equipped with secondary crusher bars WERT GmbH is a metalworking company specializing in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex, and Keestrac. With an in-house design department and a highly skilled team, we provide customized, innovative solutions that meet the highest quality standards. Our goal is to continuously meet the individual needs of our clients through technological excellence and improvement. We serve companies across various sectors, including waste management, recycling, and mechanical engineering, and place great importance on long-term partnerships. With our reliable and high-performance shredding solutions, we help our clients increase their efficiency and competitiveness.

Year of construction: 2003, condition: good (used), Weishaupt gas burner Monarch Burner type G7/1-D Version ZMD Power 300 - 1750 KW Including gas line ( gas fitting ) Burner was recently in operation Godpfx Aemdpczsayoca

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! Gcjdpfx Aaefzb Nieysa The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: new, fuel type: diesel, axle configuration: 6x2, emission class: euro6, Equipment: ABS, air conditioning, crane, differential lock, onboard computer, soot filter, trailer coupling, MAN TGS 26.480 WHEELBASE 3900 NEW PM 40.5 SP CRANE EQUIPMENT 6 EXTENSIONS + 4 JIB EXTENSIONS TIPPING BODY 5.30 METERS Gsdpfxowk Rbts Aayjca

Condition: new, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 35,000 mm, fuel type: diesel, construction height: 3,100 mm, gearing type: automatic, KEY FACTORS - Westtech WOODCRACKER® CS 750 Smart (cutting diameter 75cm) - Front screen guard - Closed mast - Mast scraper for the extensions - LED headlights on mast and cab - Camera system (camera on mast front, side and rear on counterweight) - Extended radio remote control with saw function and support - 40 Km/h or 20 Km/h - Vibration damper - Support plates with bracket, EQUIPMENT - Maintenance-free wet multi-disc brakes in front and rear axle -Comfort seat with weight adjustment and armrests - Spacious pressurized cab with air conditioning + heating - Operation via the clear 10-inch touch pad and navigation button - ROPS/FOPS cab with optimum all-round visibility - 360° endless rotation - 12 V connection in cab - automatic leveling of the scissor supports - Attachment recognition - Levelling ? Levelling system on wheels - Lighting according to StVZO - TÜV package + TÜV approval - Individualization of manoeuvres - Fork carriage with forks 1,200 mm AREAS OF APPLICATION - Safe removal of trees in sections. - Special tree removal in urban areas or settlements. - Maintenance work along roads and routes. - Problem tree felling. - Tree felling on slopes and embankments - Ideal for use in municipal areas - Removal of storm damage - Traffic safety and road safety EXCLUSIVE: THE MAGNI RTH 6.30 SH / 6.35 SH WITH WESTTECH WOODCRACKER® CS 750 SMART is available exclusively from us at Stefan Ebert GmbH in Burghaun, Gcodpoibuy Eefx Aayea We are an official Magni telescopic handler sales and service partner, Westtech Woodcracker sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany, We supply the complete Westtech Woodcracker program for you! On request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank, For further information, please visit our homepage, Subject to errors and prior sale!

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: EKN7528, cooling capacity: 714.5 kW (971.45 HP), type of cooling: water, total width: 2,300 mm, total length: 7,050 mm, total height: 2,500 mm, Equipment: compressor, Used Trane RTAC 200 air cooled water chiller on R134A. Complete with Trane CHHP0N2TKE0N134A semi-hermetic screw compressor, condenser with 14 fans that produce a total airflow of 185.400 m³/h, shell and tube as evaporator, braced heat exchanger and a control panel with a Trane Adaptive controller. Gcedporlk E Tjfx Aayoa