Coat grinder

PALMARY GU32X60S

Condition: new, Year of construction: 2022, A brand new generating set, consisting of two generators placed in one housing, based on Scania engines. Possibility of synchronization with other units or aggregates, and optionally also with the network. Maximum Power E.S.P. [kVA] / [kW] 902.0 / 722.0, Rated power P.R.P. [kVA] / [kW] 820.0 / 656.0, Driver type: ComAp InteliGen 500, Easy-to-use, intuitive graphical interface. Rsdpfx Aemrqi Eja Uop

Condition: used, Clamping plate, marking-out plate, measuring plate, measuring table, welding table, welding table, straightening plate Rodpsfc T Tqofx Aa Usp -Clamping plate comes: from a measuring machine -Width: 1335mm -Length: 3000mm -Height: 250mm -Plate thickness: 40 mm -Plate is with: support ribs -with: 4x adjustable feet -Number: 1 piece available -Transport dimensions: 3000/1335/H750 mm -Weight: 2749 kg

Condition: used, Year of construction: 2000, grinding length 800 mm centre height 150 mm Control FANUC grinding wheel size max. 400 x 63 x 127 mm workpiece weight 120 kg engine output 7,5 kW Rsdpfx Aaju Hag Ns Uop turning speed range - grinding wheel 45 m/s m/s swivelling range +45/-15° Grad work piece spindle speed 22-313 / 51-750 U/min workpiece spindle swivable +/- 90 ° tailstock quill taper MT MK 4 x-travel 355 mm z-travel 4,0 mm Working speed 0 + 7,5 m/min weight of the machine ca. 4,0 t dimensions of the machine ca. BTH 3,7 x 2,2 x 1,9 m -incl. Coolant system -incl. Lynette -incl. Sharpening diamond -incl. open Lynette -incl. 3 pieces of grinding discs -incl. 3 pieces of flanges -incl. Internal grinding spindle attachments

Condition: new, Wet exhaust system Redpeci Tlrefx Aa Uop - available in steel and stainless steel - suction output 1650, 3750 or 7000 m3/h - engine 3,5.5 or 15 kW

Condition: used, New Diesel Generator Set, Power Generator, Emergency Generator DAEWOO Model DAGFS 100 New, unused Rated Power: 100 kVA Continuous Power: max. 80 kVA Standby Power: 110 kVA / 88 kW Rated Current: 33 Amp. Voltage: 400/230 Volt, 50 Hz 230 Volt, 50 Hz Fuel Consumption: 135-liter tank capacity for up to 8 hours of operation at 75% load Fuel consumption at 75% load: approx. 16 liters/h Fuel consumption in standby: approx. 7 liters/h Drive Engine: Diesel inline engine RICARDO type R6105AZD Rsdpfsx Srv Iox Aa Ujp Engine Power at 1500 rpm: 100 kW Engine Power at 1800 rpm: 110 kW Tank Capacity: 135 liters - Simple and compact design with sound-insulated metal enclosure - Forklift pockets for easy and safe forklift handling - 3x CEE 16 Amp sockets (3-pin, 230 Volt) - 1x CEE 32 Amp socket (5-pin, 400 Volt) - Terminal blocks for cable power connection to external consumers, e.g. construction site power distributor - ATS module for mains backup operation, automatic emergency power switchover in case of power failure - 2 starter batteries, 12 Volt, for 24 Volt starter Required space: L x W x H 2700 x 1050 x 1430 mm Weight: 1400 kg Brand new machine from stock

Year of construction: 2020, condition: new, Oxygen and temperature measurement in molten metals Rsdpfogqr A Dex Aa Ujp

Condition: used, Technical details: grinding diameter: 260 mm grinding length: 1000 mm centre height: 130 mm clamping length: 1000 mm feed:: per Hand headstock adjustment: 280 manuell mm total power requirement: ca. 6,0 kW weight of the machine ca.: 1,5 t dimension machine xH: 2580 x 1750 x 1630 mm Non-circular grinding machine - (crankshaft grinding machine) Used for grinding crankshafts, camshafts, etc. Machine table: - rotatable right/left: 6° each - clamping surface workpiece 1240 x156mm Rsdpfx Aaou Ng Dto Uop Grinding headstock: - headstock adjustment 150mm to workpiece axis - rotatable right/left 90° in two planes - feed by hand manual 280mm - grinding wheel/grinding wheel = 350x32x127mm internal grinding spindle type Fortuna SJ 60 x 250L Workpiece headstock: - speed 25 - 65 - 155 - 400 rpm - rotatable by hand adjustment, +/- 90°. - center height 130mm Equipment: Tailstock equipped with dressing device, quill quick clamp with center point. Machine is available for demonstration. *

Year of construction: 1973, condition: good (used), 1 used spline shaft grinding machine make Fritz Werner type FKR 16 Rodpfxen Atchs Aa Usp year 73 No. 5275/8012 technical data center height 185 mm max.grinding length1600 mm passage diameter 55 mm pitches 4-32 L 5900 x W 2300 x H 2000 mm weight 7 to

Condition: used, Year of construction: 1982, grinding diameter 630 mm grinding length 600 mm centre height 320 mm Machine with heavy duty workhead. Machine will be partial overhauled before delivery. Machine will get a geometry protocoll according to the Kellenberger new machine guideline Rjdsv Dxxzepfx Aa Uop

Year of construction: 1973, condition: used, grinding length 1600 mm centre height 185 mm diamter spiral cutter 55mm mm indexing 4-32 Modul Redpfxopid Ivo Aa Usp length 5900 mm width 2300 mm height 2000 mm weight 7 t