Safety wooden gratings

Condition: ready for operation (used), Year of construction: 2008, operating hours: 18,349 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, controller model: OSP P200L, Equipment: chip conveyor, TECHNICAL DETAILS Bsdpfxey Txycs Ammodc Turning length: 1,000 mm Turning diameter: 340 mm Spindle speed (max.): 4,800 rpm Axes: 4 Tool turret A: VDI40 V12 with driven tools Tool turret B: VDI40 V8 MACHINE DETAILS Control system: OSP P200L Operating hours: 18,349 h EQUIPMENT Touch probe Chip conveyor Coolant station Standard spindle bore Tailstock: manual

Condition: new, functionality: fully functional, New machine - stock clearance sale - Tipping is mechanical. The stated price is net ex warehouse location. Bdjdpfew Sfdwox Ammoc

Condition: not inspected (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: 71267, total width: 500 mm, total length: 500 mm, total height: 500 mm, overall weight: 20 kg, TECHNICAL DETAILS Measuring volume: 1,200 mm Accuracy: 0.015 mm MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): approx. 500 x 500 x 500 mm Weight approx.: 20 kg Bdodsy Tm Uzepfx Ammsc EQUIPMENT Laptop and software (completeness not guaranteed) Transport case Note: The red base on which the laptop sits is not included in the offer.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 70352, total width: 1,200 mm, total length: 1,200 mm, total height: 1,800 mm, overall weight: 100 kg, TECHNICAL DETAILS Measuring volume: 3,000 mm Bjdpfxey Tm Hks Ammodc Accuracy: 0.045 mm MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 1,200 mm x 1,200 mm x 1,800 mm Weight: 100 kg EQUIPMENT Laptop and software (completeness not guaranteed) Base frame Transport case

Year of construction: 1988, condition: repair required (used), mechanisation for planer infeed -For lengths up to ca. 13 m -Ideal unit for KVH (solid construction timber)and BSH (laminated beams) in front of the planer -1 operator -lateral destacking unit -separation -4 cross cut saws -cutting cross section 180x220 mm, 150x300 mm Bedpfx Amjvbtpjmsdc

Condition: ready for operation (used), Year of construction: 2001, operating hours: 18,500 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller model: CNC OSP 100M, rotational speed (max.): 5,000 rpm, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS Travel range, X-axis: 700 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 700 mm Rotary table/B-axis: indexed in 1° steps, 360 positions Spindle speed: 25 - 5,000 rpm Type of input current: Three-phase Pallet size (2x): 500 mm x 500 mm Table size: 500 mm x 500 mm Table load: 800 kg Distance spindle nose to table surface: 150 mm - 850 mm Tool holder: MAS BT 50 Tool magazine (ATC): 60 positions, chain magazine Bdjdpfx Amey S S U Demsc Tool length max.: 450 mm MACHINE DETAILS Control: CNC OSP 100M Dimensions & Weight Dimensions (L x W x H): 5,500 mm x 3,160 mm x 3,300 mm Machine weight: 21,000 kg Spindle hours: 18,500 h EQUIPMENT Chip conveyor Coolant system Pocket filter system for internal cooling Spindle speed, continuously adjustable

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 5351126, controller model: Siemens 840D, number of slots in tool magazine: 42, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS Tool holder: SK-40 Tool magazine: 42 positions MACHINE DETAILS Control system: Siemens 840D EQUIPMENT Tool breakage monitoring Filter unit: Knoll, type VRF 300/800 Bdjdpfx Asy S S N Ijmmoc Chip conveyor: Knoll, type 340 K-1/100

Year of construction: 2009, condition: excellent (used), machine/vehicle number: 104/1656, Size 60 x 75 cm, only for turning (without airing), with fixed control desk Machine nr: 104/1656 Bsdpfxohqhcis Ammodc

Condition: ready for operation (used), Year of construction: 2002, operating hours: 9,675 h, functionality: fully functional, controller model: U100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, number of axes: 3, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS X-axis travel: 1,050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Main spindle: 12,000 rpm MACHINE DETAILS Control system: U100M Axes: 3 Tool changer (ATC): 32 SK40 Cutting time: 9,675 h EQUIPMENT Documentation/Manual Speed infinitely adjustable Bdodpfx Amey S S Nnomsc Chip conveyor Coolant system Preparation for A-axis (4th axis)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 280 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 320 mm, controller model: OSP 700L, TECHNICAL DETAILS Maximum turning length: 280 mm X-axis travel: 155 mm Z-axis travel: 320 mm Spindle speed: 4,200 rpm MACHINE DETAILS Control system: OSP 700L Turret: V12, direct mounting EQUIPMENT Chip conveyor Touch probe Coolant pump Parts collector Collet chuck Bdsdpoy S S Hgefx Ammsc

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials Bdodpfxsx Af Rde Ammjc + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, spindle speed (max.): 3,200 rpm, overall weight: 6,500 kg, controller model: U-10L, TECHNICAL DETAILS Maximum turning diameter: 210 mm Maximum turning length: 500 mm X-axis travel: 155 mm Z-axis travel: 520 mm Spindle speed: 3,200 rpm MACHINE DETAILS Control system: U-10L Dimensions & Weight Dimensions (L x W x H): 2,700 x 1,900 x 1,700 mm Total weight: 6,500 kg EQUIPMENT Documentation/Manual Adjustable spindle speed Parts catcher Touch probe Bsdpfx Amey S Sytomodc V12 turret VDI 30 (all powered) Manual tailstock Chip conveyor Coolant pump Bar loader Samsys MUS-3000, year 2007 SMW chuck KNCS-N210-52

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,500 h, functionality: fully functional, controller model: OSP 7000M, Equipment: chip conveyor, TECHNICAL DETAILS Tool changer: 24 BT40 MACHINE DETAILS Control system: OSP 7000M HS: Big Bore GS: Standard Bore Bsdpfxjy S Sw Es Ammsdc Coolant pump: 8 bar Spindle hours: 12,500 h EQUIPMENT Chip conveyor

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: Bdjdpfeq Nfuzsx Ammec - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,500 h, functionality: fully functional, turning diameter: 630 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 935 mm, controller model: Okuma OSP P200L, TECHNICAL DETAILS Diameter over slide: 630 mm Machining diameter: 630 mm Distance between centers: 900 mm Travel range X-axis: 580 mm Travel range Y-axis: 160 mm Travel range Z-axis: 935 mm Travel range W-axis: 1,000 mm Travel range C-axis: 360° Travel range B-axis: -30° to 195° Main spindle: 3,800 rpm Counter spindle: 5,000 rpm Milling spindle: 6,000 rpm Rapid traverse X-axis: 40,000 mm/min Rapid traverse Z-axis: 40,000 mm/min Rapid traverse Y-axis: 26,000 mm/min Rapid traverse W-axis: 20,000 mm/min Rapid traverse C-axis: 200 rpm Rapid traverse B-axis: 30 rpm Tool diameter max.: 90 mm Tool diameter without adjacent tools max.: 130 mm Tool length max.: 300 mm Tool weight max.: 10 kg Bdjdey S Swxspfx Ammoc MACHINE DETAILS Number of axes: 6 Control system: Okuma OSP P200L Dimensions & Weight Footprint: 4,340 × 2,050 mm Height: 2,600 mm Weight: 10,300 kg Spindle hours: 10,500 h EQUIPMENT Documentation/Manual Speed infinitely adjustable Marpos tool sensor Chip conveyor & coolant system with small band filter system ATC 60 system HSKA-63 (60 tools)