PRESS BRAKES + SHEARS – Sheet Metal

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,000 h, functionality: fully functional, load capacity: 3 kg, arm reach: 1,130 mm, No minimum price – guaranteed sale to the highest bidder! Auction of two ABB IRB 360 (Flexpicker) robots including vision system! TECHNICAL DETAILS Payload: 3 kg Working area diameter: 1,130 mm Positional repeatability: 0.03–0.1 mm Path repeatability: 0.1–0.33 mm MACHINE DETAILS Weight: 120 kg Supply voltage: 200–600 V Supply frequency: 60 Hz Fpodpfxsznh T Es Ahmsk Power consumption at maximum load: 0.477 kW Payload for pick-and-place cycle: 1 kg Ambient temperature: 0 to +45 °C Relative humidity: max. 95 % Noise level: < 70 dB(A) Emissions: EMC/EMI shielded Operating hours: 6,000 h

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. Fpedperq D Niefx Ahmek The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,000 h, functionality: fully functional, load capacity: 12 kg, arm reach: 1,850 mm, No minimum price – guaranteed sale to the highest bidder! Fsdpfx Ajznh Tfshmopk TECHNICAL DETAILS Load capacity: 12 kg Reach: 1,850 mm MACHINE DETAILS Operating hours: 6,000 h Scope of delivery: Robot + Controller + Control cabinet + Flex pendant and ProfiNet I/O Slave software

Condition: ready for operation (used), Year of construction: 2018, operating hours: 225 h, functionality: fully functional, overall weight: 160 kg, load capacity: 10 kg, arm reach: 1,420 mm, repeat accuracy: 0.04 mm, number of axes: 6, No minimum price – guaranteed sale to the highest bidder! The robot is currently installed in a ProModulR cell! TECHNICAL DETAILS Reach: max. 1,420 mm Rated payload: 10 kg Rated additional load, carousel: 0 kg Rated additional load, swing arm: 0 kg Rated additional load, arm: 10 kg Rated total load: 20 kg Positional repeatability according to ISO 9283: ± 0.04 mm Number of axes: 6 Mounting area: 333.5 mm × 307 mm Range of motion A1: ± 170° Range of motion A2: -185° / +65° Range of motion A3: -137° / +163° Range of motion A4: ± 185° Range of motion A5: ± 120° Range of motion A6: ± 350° Axis speed A1: 220 °/s Axis speed A2: 210 °/s Axis speed A3: 270 °/s Axis speed A4: 381 °/s Axis speed A5: 311 °/s Axis speed A6: 492 °/s MACHINE DETAILS Fpodpfx Ahoznh Snomok Protection class according to IEC 60529: IP65 Protection class robot hand according to IEC 60529: IP67 Ambient temperature during operation: 5 °C to 45 °C Ambient temperature during operation: 278 K to 318 K Mounting positions: Floor Ceiling Wall Any angle Weight: approx. 160 kg Operating hours: 225 h

Condition: good (used), Pressure 110 Ton Edge length 3100 mm Year of construction 1990+ retrofit Stand width 2600 mm Steered axles Y1,Y2,X axis Control Esa S630 control Including Wila Sealing stamp Fodpfx Aew Hx Rzehmjpk

Condition: ready for operation (used), Year of construction: 2020, operating hours: 26,600 h, functionality: fully functional, machine/vehicle number: 1026106, overall weight: 57 kg, load capacity: 10 kg, arm reach: 1,101 mm, controller model: KR C4 compact, repeat accuracy: 0.02 mm, No minimum price – guaranteed sale to the highest bidder! The robot is currently installed in a testing facility. TECHNICAL DETAILS Maximum reach: 1,101 mm Maximum payload: 10.9 kg Repeatability according to ISO 9283: ± 0.02 mm Number of axes: 6 Range of motion A1: ± 170° Range of motion A2: -190° / +45° Range of motion A3: -120° / +156° Range of motion A4: ± 185° Range of motion A5: ± 120° Fpsdpfx Ahsznh Rqjmjk Range of motion A6: ± 350° MACHINE DETAILS Controller: KR C4 compact Teach pendant: KUKA smartPAD Cycle rate: 140 cycles/min Movement sequence: 25 mm / 305 mm / 25 mm Test load: 1 kg Ambient temperature during operation: 0 °C to 45 °C Protection class according to IEC 60529: IP65 / IP67 Protection class in series according to IEC 60529: IP65 / IP67 Dimensions and weight Base area: 208 mm × 208 mm Weight: approx. 56.5 kg Mounting positions Floor Ceiling Wall Any angle Operating hours: 26,600 h

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 30S00738, Year of construction: 2013, operating hours: 8,506 h, load capacity: 7,000 kg, lifting height: 4,450 mm, construction height: 3,300 mm, fork length: 1,200 mm, empty load weight: 10,410 kg, TECHNICAL DETAILS Load capacity: 7,000 kg Lifting height: 4,450 mm Overall height: 3,300 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Standard Dimensions & Weight Dimensions (L x W x H): 3,550 x 1,980 x 3,300 mm Dead weight: 10,410 kg Fpedpfx Aozmwmlohmsk Transmission: Automatic Front tires: Superelastic Rear tires: Superelastic Operating hours: 8,506 h EQUIPMENT 3rd valve 4th valve Full cabin Cabin heater Hydraulic line preparation

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m Fpsdpfxeu Idbys Ahmsk NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Year of construction: 2019, operating hours: 50 h, condition: excellent (used), functionality: fully functional, workpiece length (max.): 40 mm, No minimum price – guaranteed sale to the highest bidder! Unit with only 50 operating hours! The new price was €280,000! Currently, the unit is only partially operational, as it is not currently connected to the cooling system. TECHNICAL DETAILS Component types: Screws and bolts M8 and M10 Process: Automatic inductive hardening Throughput: approx. 70–80 parts/min Processable screw length: 25 - 40 mm MACHINE DETAILS Automation and feeding Feeding: Hopper conveyor Conveying technology: Inclined conveyor Sorting: Linear sorter Singulation: Automatic Indexing table: 8-position Nests per station: 2 Quenching medium: Water Quenching water tank: Present Discharge: Magnetic discharge conveyor Demagnetization: Present Quenching medium filtration: Cartridge filter Cooling: Prepared for connection to a central cooling system Fsdpfxszmwcaj Ahmjpk RF generator manufacturer: IDEA Heating power: 50 kW Power: 67.98 hp EQUIPMENT Hopper conveyor Inclined conveyor Linear sorter 8-position indexing table with 2 nests per station IDEA RF generator Quenching water tank Magnetic discharge conveyor Demagnetization unit Cartridge filter Temperature monitoring Component height monitoring Component type monitoring Rotation monitoring Energy monitoring Ground fault monitoring Inductor flow monitoring Inductor water temperature monitoring

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, punching force: 28 t, workpiece weight (max.): 200 kg, working width: 3,080 mm, working length: 1,560 mm, The following components of the machine have been renewed: Festo pneumatic system Brand new Labod control system Replacement of the Y-axis bearings TECHNICAL DETAILS Working area: 1,560 × 3,080 mm Sheet metal length through repositioning: max. 9,999 mm Fpjdpfxozl Srae Ahmok Hydraulic punching force: max. 280 kN Workpiece weight: max. 200 kg Positioning speed of the X-axis: max. 60 m/min Positioning speed of the Y-axis: max. 60 m/min Simultaneous positioning speed of the X and Y axes: max. 85 m/min Stroke rate with standard hydraulics: max. 250 strokes/min Stroke rate with quick hydraulics: max. 800 strokes/min EQUIPMENT BOSCHERT software Note: The machine has already been disassembled.

Condition: used, Year of construction: 2014, turning diameter 376 mm turning length 760 mm control Fanuc x-axis 260 mm z-axis 830 mm weight of the machine ca. 6000 kg Fodpfxsy Sblrj Ahmopk

Condition: excellent (used), Year of construction: 2022, operating hours: 326 h, functionality: fully functional, machine/vehicle number: A20221005, feed length X-axis: 5,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 100 mm, workpiece weight (max.): 500 kg, working width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Auction of a fully automatic coating system consisting of the following components: VEN SPRAY SMART spraying system VEN MOVE TRANSFER VEN TRANS BELT (x3) VEN TRANS BELT with dust protection hood VEN MOVE TRANSFER with drying chamber Air supply unit HC12 The system was installed in 2022 and was in operation for approximately 1 year (326 operating hours in pistol drive). TECHNICAL DETAILS VEN SPRAY SMART spraying system (year of manufacture: 2019) Feed speed: 1.5-4.0 m/min Working speed: 2.0 m/min Working height: 920±20 mm Working width: 1,300 mm Min. workpiece size: 300 x 100 x 10 mm Max. workpiece size: 3,600 x 1,200 x 50 mm Coating material: water-based paints, solvent-based paints Spraying process: Air, Airmix, Airless 326 operating hours VEN MOVE TRANSFER 180° (year of manufacture: 2022) Length: approx. 6000 mm Width: approx. 8,078 mm Speed: 3.2 m/min Max. load: 20 kg/m 766 operating hours 3x VEN TRANS BELT belt conveyor (year of manufacture: 2022) Length: approx. 5,635 mm Outer width: approx. 1,511 mm Working width: approx. 1,300 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m 766 operating hours VEN TRANS BELT with dust protection hood (year of manufacture: 2022) Length: approx. 3,800 mm Working width: approx. 1,300 mm Working height: 920±20 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m VEN MOVE TRANSFER with drying chamber (year of manufacture: 2022) Length: approx. 6,000 mm Width: approx. 8,078 mm Conveyor speed: 3.0 m/min Fjdpfozlxilex Ahmopk Max. load: 20 kg/m Drying chamber manufacturer: Adolph & Co GmbH Min. exhaust air volume: 1,200 m³/h Operating hours (see image) Belt: 766 h Ventilation: 1,620 h Pistol drive: 326 h EQUIPMENT Fully automatic coating process Multi-layer coating programmable Automatic control of the entire coating process 6 freely programmable spray guns Suitable for water-based and solvent-based paints Suitable for automated coating processes in industrial applications

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 16,584 h, load capacity: 6,590 kg, lifting height: 4,010 mm, construction height: 2,910 mm, fork carriage width: 2,000 mm, fork length: 1,800 mm, TECHNICAL DETAILS Load capacity: 6,590 kg Load center: 600 mm Lift height: 4,010 mm Overall height: 2,910 mm Fork length: 1,800 mm Fork width: 150 mm Fork thickness: 70 mm Fork carriage width: 2,000 mm MACHINE DETAILS Drive type: Internal combustion engine Mast type: Standard Fpedpfx Ahezrgh Aemek Dimensions and weight Dimensions (L x W x H): 3,550 x 2,000 x 2,910 mm Dead weight: 12,270 kg Front tires: Superelastic, 8.25-15 Rear tires: Superelastic, 8.25-15 Operating hours: 16,584 h

Condition: new, Year of construction: 2025, functionality: fully functional, stroke length: 310 mm, operating speed: 10 mm/s, reverse speed: 200 mm/s, throat depth: 410 mm, oil tank capacity: 220 l, travel distance X-axis: 750 mm, controller manufacturer: ESA, controller model: S 875W, working width: 4,100 mm, bending force (max.): 220 t, back gauge: 750 mm, distance between stands: 3,600 mm, control type: CNC control, degree of automation: automatic, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Hybrid Bending Press MVD 4100 x 220 Tons HC-Series CNC ESA S 875W 21″ *dxf 3D ready 8 axes (Y1-Y2-X-R-Z1-Z2-X5_conical_A1) Automatic WILA crowning table Dsp Laser GIVI MISURE high-precision optical scales UNIMEC back gauge Upper tool clamp: Promecam Rolleri Type H = 150 mm Multi-cavity die, full length Press force: 220 tons Fedpfsx N Rxcex Ahmspk Bending length: 4100 mm Distance between uprights: 3600 mm Throat depth: 410 mm Table – ram opening (“light”): 515 mm Working height: 965 mm Y-axis stroke: 310 mm Y-axis descent speed: 200 mm/s Y-axis working speed: 0–10 mm/s Y-axis return speed: 200 mm/s X-axis back gauge stroke: 750 mm Power: 18.5 kW Dimensions (L x W x H): 5600 x 2200 x 3040 mm Approximate weight: 13,700 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,300 kg, power: 2 kW (2.72 HP), controller model: HBG 10, workpiece length (max.): 3,000 mm, bar passage: 60 mm, TECHNICAL DETAILS Workpiece length, max.: 3,000 mm Guide channel diameter: approx. 60 mm MACHINE DETAILS Control panel: HBG 10 Drive power: 2 kW Weight: 1,300 kg Fsdezqcv Tepfx Ahmopk