Collision protection - Bumper guard - Approach angle

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Njdpsz D Taajfx Ac Aolg Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab The machine also has: - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Nodeuiy Hrepfx Ac Aelg Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Mass clamping device for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) - Delivery and installation on your premises - Training of your employees

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Nsdpfx Ajz A D Irsc Aslg Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, empty load weight: 550 kg, total length: 3,210 mm, total width: 1,162 mm, total height: 2,050 mm, discharge height: 1,080 mm, machine/vehicle number: 2211410, TECHNICAL DETAILS Capacity, light vegetables: max. 400 kg/h Capacity, heavy vegetables: max. 800 kg/h MACHINE DETAILS Voltage: 3~ 400 V Frequency: 50 Hz Connected load: 7 kW Fuse rating: 25 A Water content: 500 l Protection class: IPX4 Dimensions & Weight Dimensions (L x W x H): 3,120 x 1,162 x 2,050 mm Machine weight: 550 kg Loading height: 1,140 mm Unloading height: 1,080 mm EQUIPMENT Barbotage system Nodpfx Aoz Ahnroc Ajlg Frequency-controlled pumps Inverter control Stainless steel design Conveyor belt with product discharge Rinsing via spray device Height-adjustable feet Spiral water guide Extended and raised product discharge zone, special design Extension of the product discharge zone: 200 mm Documentation

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) Nljdpfxsxvbvvs Ac Aeg - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: used, machine/vehicle number: BXMS230118020, No minimum price – guaranteed sale to the highest bidder! The new price was €4,950! Nljdpfozz H D Aox Ac Aeg TECHNICAL DETAILS Relief for the lower back: up to 25 kg Support force: continuously adjustable MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 600 x 600 x 600 mm Weight: 5 kg FEATURES Purely mechanical control at hip height Automatic deactivation of support during walking Force absorption during bending and force release during lifting Load transfer from the shoulders to the thighs via a support structure Energy storage Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 2000

Condition: used, Year of construction: 2019, battery capacity: 1,376 Ah, battery voltage: 80 V, overall weight: 2,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Battery type: 8 PzS Nominal voltage: 80 V Capacity: 1,376 Ah Voltage in idle state: 88.89 V Suitable for: Linde E70 and E80 Nsdpfx Aozz H Dpec Aelg Dimensions & Weight Dimensions (L x W x H): 1,290 x 1,030 x 770 mm Net weight: 2,500 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1156

Year of construction: 2017, condition: excellent (used), machine/vehicle number: SI8x4125, DEMAG KBK crane canopy crane runway with dimensions approx. 6x5m (5m bridge) This crane is available several times ! Payload / lifting capacity 125 KG - 0,125to Technical data of the system: Crane runway made of Demag KBK1 + KBK2L rails System is supplied complete: Nledeupwa Rjpfx Ac Ajg KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Crane is with internal power supply incl. 125KG Demag DC chain hoist - lifting height approx. 3.5m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: used, Year of construction: 2020, overall weight: 540 kg, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Fork adjustment: 4-way Fork length: 1,200 mm MACHINE DETAILS Dimensions & Weight Nedpezz H Diofx Ac Aelg Dimensions (L x W x H): 1,500 x 1,500 x 1,600 mm Self-weight: 540 kg EQUIPMENT 4-way fork adjuster Fork carriage Fork tines with 1,200 mm length All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1152

Condition: used, Year of construction: 2019, No minimum price – guaranteed sale to the highest bidder! Nsdpszz H A Eefx Ac Aolg TECHNICAL DETAILS Load capacity forklift: 2,500–5,000 kg Fork length: 1,350–2,000 mm Mounting: FEM 3A MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 800 x 1,000 mm Net weight: 250 kg EQUIPMENT Hydraulic telescopic forks For loading onto a pallet for truck loading All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 1103

Condition: new, Sawing machine/reciprocating saw MTI AS-350-SA - Saw blade diameter 350 mm (other sizes and models available upon request) - Positioning length continuously adjustable up to 300 mm (other lengths available upon request) - Cutting range (height x width) depending on the model Nsdpfod Rhzqox Ac Aelg - Optional with roller conveyor, smooth conveyor, etc. - Other accessories available upon request We would be happy to provide you with a customized quote tailored to your requirements.

Condition: used, Year of construction: 2022, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS FEM class: FEM 3 Load capacity forklift: 3,000–5,000 kg Fork length: 1,350–2,350 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 1,000 x 1,000 mm Self-weight: 200 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Nsdpfezz H Afsx Ac Aolg Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1081

Condition: used, Year of construction: 2019, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Internal opening width: 70–940 mm Rotation range: 360° Fork length: 2,400 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,350 x 1,000 mm Self-weight: 1,000 kg Originating machine: Linde E50HL EQUIPMENT 3rd, 4th, and 5th valve Rotating clamp with 360° rotation function Fork positioner Side shifter Fork, 2,400 mm long All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Nlsdpfx Acozz Hzzs Ajg Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1013

Condition: used, machine/vehicle number: 90540056, Year of construction: 2017, operating hours: 788 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 2,500 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 150 Ah Nodpozz Hzuofx Ac Aelg Battery type: 2 PzB Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,720 mm Own weight: 800 kg Service valid until: 07/2027 UVV (Occupational Safety and Health) certificate valid until: 07/2027 Operating hours: 788 h All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 446