Dividing head

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Pedpezln D Eofx Agdopw Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar EQUIPMENT Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles.

Condition: excellent (used), Year of construction: 2007, turning length: 535 mm, spindle bore: 65 mm, travel distance X-axis: 225 mm, travel distance Z-axis: 535 mm, spindle motor power: 26,000 W, total height: 1,900 mm, total length: 2,900 mm, total width: 2,300 mm, overall weight: 4,380 kg, CNC Lathe MAZAK - QTN 200-II MACH-ID 9481 Make: MAZAK Type: QTN 200-II Ppodpeyyxh Tjfx Agdjw Control: Mazatrol Matrix Nexus Year: 2007 Max. turning Ø:610mm X-Axis: 225mm Z-Axis: 535mm Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 26kW ATC / revolver:12 Chip conveyor: Yes Tool eye: Yes Hours: 5049H Length: 2900mm Width: 2300mm Height: 1900mm Weight: 4380kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Podszlnxiopfx Agdepw Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, power: 14 kW (19.03 HP), input current: 80 A, workpiece length (max.): 4,000 mm, machine/vehicle number: 6080008129, TECHNICAL DETAILS Maximum profile width: 130 mm Maximum profile height: 205 mm Maximum workpiece/profile length: 4,000 mm Processing capacity: 80 units MACHINE DETAILS Connection: 3 N/PE 400 V Frequency: 50 Hz Current: 80 A Power: 14 kW Pedpfx Agezlnvusdopw EQUIPMENT Powered, continuously adjustable gripper Lifting function for smooth feeding Profile guidance on rollers Internal gripper to prevent damage to the profiles Integrated measuring sensors for workpiece length control Workpiece removal via outfeed table Portal design for high profile cross-sections Industrial PC with Windows operating system Barcode scanner

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Ppodjtylazopfx Agdjw Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control Swarf auger Lighting Coolant system Enclosed guarding

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,125 h, load capacity: 8,000 kg, lifting height: 3,600 mm, mast type: duplex, fork length: 2,050 mm, overall weight: 13,948 kg, An oil change was performed before the sale. Only the hydraulic oil was not changed. The filters have been replaced. Pjdpfezlhnqjx Agdjpw TECHNICAL DETAILS Load capacity: 8,000 kg with load center at 900 mm Residual load capacity with Kaup 10T160 fork positioner: 7,320 kg with load center at 900 mm Tractive force with/without load: 45.6 kN Lifting height: approx. 3,600 mm Fork length: approx. 2,050 mm MACHINE DETAILS Engine: LPG GM 5.7L V8 Cylinders: 8 Displacement: 5,700 cm³ Rated speed: 2,200 rpm Power: 85 kW Operating hours according to display: approx. 4,125 h Operation: Solo-Pilot with multi-function display Dimensions & Weight Overall length including forks: approx. 5,950 mm Overall width: approx. 2,150 mm Height with mast retracted: approx. 3,160 mm Height with mast extended: approx. 4,960 mm Height above protective roof: approx. 2,705 mm Self-weight: approx. 13,948 kg EQUIPMENT Kaup 10T160 fork positioner Duplex mast 3rd + 4th control circuit Side shifter Solo-Pilot Single pedal control Work lights front and rear Full cabin with heater Note: The two tires on the steering axle, as well as the fork tines, should be replaced. This can be requested and carried out by the seller. Fork tine length would be selectable.

Condition: used, Year of construction: 2007, operating hours: 39,023 h, machine/vehicle number: 1315318, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 900 kg, No minimum price – guaranteed sale to the highest bidder! Podpfezlhcnex Agdspw The machine has not been powered on for approximately one year. TECHNICAL DETAILS Laser power: 5,000 W Working area (X x Y x Z): 3,000 mm x 1,500 mm x 115 mm Sheet metal thickness, structural steel max.: 25 mm Sheet metal thickness, stainless steel max.: 20 mm Sheet metal thickness, aluminum max.: 12 mm Maximum workpiece weight: 900 kg Positioning speed max.: 300 m/min Positioning accuracy: +/- 0.1 mm MACHINE DETAILS Control system: CNC Siemens Sinumerik 840 D Operating hours, laser on: 77,107 h Operating hours, beam on: 39,023 h Dimensions & Weight Machine dimensions (L x W x H): 11,100 mm x 4,600 mm x 2,400 mm Machine weight: 12,000 kg EQUIPMENT Automatic pallet changer NitroLine FocusLine PlasmaLine SprintLine ContourLine

Condition: used, Year of construction: 1979, SKF cylindrical grinding machine with internal grinding attachment, hydraulically operated. Podpsgt Ea Rsfx Agdspw

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm Ppsdpjzhuyfjfx Agdjw EQUIPMENT 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Automatic profile length measurement (on both sides) Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,729 h, functionality: fully functional, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 980 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Spindle speed range: 0–18,000 rpm Ppedpjzmry Tefx Agdow Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 1,250 × 700 mm Operating hours Machine operating hours: 46,922 h Program runtime: 20,279 h Spindle operating hours: 20,746 h EQUIPMENT Fixed angular table 3D measuring probe Heidenhain Tool measurement in the working area with BLUM laser Vertical tool changer with 32 magazine slots Full protective enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 and 4 Chip conveyor Coolant system 3 height-adjustable machine feet Spindle cooler Control cabinet cooler from Rittal Operating manuals

Condition: excellent (used), Year of construction: 2021, operating hours: 8,000 h, functionality: fully functional, turning diameter: 380 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 234 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 625 mm, mount diameter: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, rotational speed (max.): 5,000 rpm, torque: 465 Nm, bar passage: 65 mm, workpiece weight (max.): 300 kg, total height: 1,857 mm, total length: 2,760 mm, chuck outer diameter: 203 mm, total width: 1,835 mm, bar diameter (max.): 65 mm, swing diameter over bed slide: 695 mm, overall weight: 5,600 kg, Equipment: chip conveyor, fume extraction, CNC lathe MAZAK Quick Turn 200MY (year of manufacture 2021) You are welcome to inspect the machine while it is powered on at our facility. If you are interested, we will send you demonstration videos of the machine. The MAZAK Quick Turn 200MY is a powerful CNC lathe for the precise and efficient machining of chucked parts in a universal application (500U). With a maximum swing diameter of approximately 695 mm and a maximum machining diameter of approximately 380 mm, the machine is particularly suitable for demanding turning operations in general mechanical engineering as well as in series and single-part production. Pjdpezkbfgefx Agdspw The robust design with travels of 234 mm in the X-axis and 625 mm in the Z-axis, as well as a bar capacity of approximately 65 mm, enables the flexible accommodation of a wide variety of workpiece geometries – with a maximum payload in chucking operations of 300 kg and a maximum loading weight of 500 kg. The powerful main spindle with an 8″ chuck size and up to 5,000 rpm ensures high cutting performance and precision. The machine is equipped with a modern MAZATROL SmoothG control system, which offers intuitive operation, fast programming, and high process reliability. The 16-tool turret (VDI 40, quick-change function) enables flexible and efficient machining processes, even for complex manufacturing tasks. The tailstock (MT No. 5, 550 mm travel) provides additional secure support for long workpieces. For further process reliability and automation, the machine has an automation package (part catcher as well as interface/connection option for robots and bar feeders). An LLS coolant mist extraction system (low maintenance costs) and a chip conveyor from Mayfran also ensure optimal production conditions. With a machine weight of approximately 5,600 kg, the Quick Turn 200MY offers high stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, it is a modern and versatile CNC lathe that guarantees high precision, performance, and reliability in industrial production. On request, we offer delivery as well as commissioning of the machine in a comprehensive, worry-free package. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 500 mm Travel range Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant system with enhanced pump Coolant pressure: 20 bar Podpfx Aszmryyogdjpw Chip conveyor Operating manual

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,377 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm Speed range: 0–20,000 rpm Speed control: stepless Magazine capacity: 30 Tool holder: HSK 63 MACHINE DETAILS Ppedpozmrpusfx Agdew Control system: Heidenhain iTNC 530 Clamping area: 900 × 600 mm Operating hours Machine operating hours: 54,796 h Spindle operating hours: 23,462 h Program run time: 20,377 h EQUIPMENT Fixed tilting table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Stand for control panel Pjdpfxjn Smcle Agdopw - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, travel distance X-axis: 5,020 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 2,000 mm, spindle diameter: 100 mm, controller model: Heidenhain 415 B, TECHNICAL DETAILS Spindle diameter: 100 mm Travel in X-axis: 5,020 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 2,000 mm Tool holder: SK 50 MACHINE DETAILS Control system: Heidenhain 415 B Rotary table dimensions: 2,500 x 2,000 mm EQUIPMENT Indexable milling head 2.5 60-position tool changer Rotary table manufacturer: Scharmann Note: The rotary function of the rotary table is defective. The machine is sold without pallet changers. Podpfxjzlryqs Agdepw