CNC press brake PETERZEN MORICO 70065

Year of construction

2025

Condition

New

Location

Douarnenez France

Machine data

Machine type:: CNC press brake PETERZEN MORICO 70065

Year of construction:: 2025

Condition:: new

Price & Location

Location:: Z.I. de Pouldavid, 29100 Douarnenez, France

Call

Details about the offer

Listing ID:: A19000241

Update:: 23.04.2025

Description

High performance CNC press brake PETERZEN model MORICO 70065 6 axis + 2 + 1

Rigid S355 steel frame
Workbench structure and Ram manufactured from laminated S355 steel
Symetric renforced Throats
Heavy grey cast iron slydways with automatic lubrication system
CNC Controller CYBELEC VisiPac 8 axis + 1
Bosch Rexroth servo valves
Inovance servo drive systems
DIEMA high resolution glass scales for high bending precision

Bending force 700T
Dedewd I Svspfx Ac Uswb
Bending lenght 6500 mm
Distance between columns 5100 mm
Depth throat 420 mm
Ram stroke 400 mm
Closing Ram approach speed limited to 30 mm/s for human operation
Closing Ram working speed 7 mm/s
Return-speed 40 mm/s
Main hydraulic motor 45 kW
Machine weight 62,000 kg

8 Axes + 1 CNC controller Cybelec VisiPac Touchscreen monitor with vivid colors and high contrast
3D graphical profile drawing (Touch Profile) and precise 2D program creation
The opening value can be setted individually in each sequence
Machine can be inferfaced with different CAM software
Easy single bends with the EasyBend page
Correction menu
Many languages available

Centered lower die system 60 mm AMADA / WILA- tool or COLLY Standard
Ram featured with intermittant tool holder for punches with AMADA or COLLY Standard dimensions and Fall down security
All toolings adopt 42CrMo4 steel, induction hardened and cnc grinded

4 Axis Back gauge adopts linear guides and Ballscrews
Back gauge travel X axis 1000 mm
2 automatic widened back gauge fingers on linear guide rails with helical rack and pinions (Axis Z1 and Z2)
Automatic height adjustment (Axis R)

2 CNC Bending Followers 400 kg up to 60° angle
Motorised displacement of bending followers and parking area on the right of the bending table

Strong automatic mechanical crowning table. The compensation value is calculated and set by the CNC system.

Safety Equipment :
3-position Foot switch with Emergency Stop Position
Closing approaching speed limited to 30 mm/s for human operation
Laser safety protection and permanent speed monitoring
Closing bending (working) speed 7 mm/s
Side covers with safety switch
Rear-protection with sliding door and safety switch
Low control Voltage (24V)
Safety control unit category IV

Standard configuration and equipment :
Electric control cabinet on left side
CNC user interface with Aluminium - arm
1 Line of punches (Upper tools) 85° R1, Height 200 mm
1 Line of centred lower Dies (to be defined)

Place of manufacture : Douarnenez (Britanny) in Northwest FRANCE
Customisation available
CE Certification in respect of CE2006/42 directive and EN12622+A1 European Standard
Operation manual in English, German and French language

Delivery and Services available worldwide
Customized Quotation
GROW YOUR BUSINESS WITH PETERZEN MACHINE TOOLS

Seller

Registered since: 2011

2 listings online

Call

Send inquiry

Telephone & Fax

+33 2 98 ... show

These listings may also fit your interest.

Auction

Бургас

2,886 km

Industrial robot
ABBIRB 6640-235/2.55

€4,500

To the auction

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,764 h, functionality: fully functional, machine/vehicle number: 6640-105136, load capacity: 235 kg, arm reach: 2,550 mm, controller model: IRC5, repeat accuracy: 0.05 mm, number of axes: 6, TECHNICAL DETAILS Load capacity: 235 kg Reach: 2,550 mm Repeatability: ±0.05 mm Axis 1: +170° to -170° Axis 1 optional range of motion: +220° to -220° Axis 2: +85° to -65° Axis 3: +70° to -180° Axis 4: +300° to -300° Axis 5: +120° to -120° Axis 6: +360° to -360° Axis 6 standard rotation range: ±96 revolutions MACHINE DETAILS Dwedpfx Acjzxqcwj Ueb Controller: IRC5 Operating hours: 29,764 h EQUIPMENT Manipulator IRC5 controller cabinet All cable sets Teach pendant

See details

Listing

Mechanical lathe Craven 2000mm x 8000mm Heavy Duty Lathe

United Kingdom

472 km

Mechanical lathe
Craven2000mm x 8000mm Heavy Duty Lathe

Call

Auction

Labeling equipment SACMI Labelling Opera 400 RF

Lombardia

1,647 km

Labeling equipment
SACMI LabellingOpera 400 RF

€72,500

To the auction

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, overall weight: 6,600 kg, year of last overhaul: 2025, Overhaul work 2025 - Lifting devices overhauled - Bottle carousel overhauled - Glue roller overhauled - Roller motor replaced - New protective covers installed - Printing heads overhauled - All sensors of the glue heating system replaced - Hoses of the extraction unit replaced - Entire electrical system inspected TECHNICAL DETAILS Output: 45,000 bottles/hour Bottle format: 500 ml, 1 l, 1.5 l Labeling system Labeling method: Roll-fed / roll labeling Label placement: Wrap-around labeling Dwjdpfxszv Rp So Ac Ueb Rotation direction: Clockwise Carousel movement: Mechanical cam drive with brake/clutch Optical centering system: Mechanical Head adjustment: Manual Number of bottle carousels: 25 Number of labeling stations: 2 MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Power consumption: 35 kW Current consumption: 57 A Machine weight: 6,600 kg EQUIPMENT - Mechanical cam drive with brake/clutch for bottle carousel movement - Mechanical optical centering system - Manual head adjustment - Roll-fed labeling system for wrap-around labels - Two labeling stations - Safety guards

See details

Auction

Laser cutting machine Bystronic BySprint Pro 3015

Sankt Gallen

1,405 km

Laser cutting machine
BystronicBySprint Pro 3015

€6,900

To the auction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, Submitting a bid obligates you to collect the item by September 21, 2026! TECHNICAL DETAILS Dwsdpfx Ajzwmn Tjc Ujb Sheet size: max. 3,048 x 1,524 mm Z-axis stroke: 70 mm Sheet thickness steel: 20 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminum: 12 mm Positional deviation Pa: ± 0.1 mm/m Positional scatter Ps: ± 0.05 mm Table load capacity: 750 kg Table changeover time: approx. 35 s Positioning speed X/Y axis parallel: max. 100 m/min Positioning speed X/Y axis simultaneous: max. 140 m/min Axis acceleration X/Y: max. 12 m/s² Cutting speed: max. 50 m/min MACHINE DETAILS Beam source: ByLaser 4400 Laser type: CO₂ laser Laser power: max. 4,400 W Wavelength: 10,600 nm Machine weight: 12,000 kg Laser weight: 1,700 kg EQUIPMENT 2 cutting heads with 5-inch and 7.5-inch lenses

See details

Listing

CNC press brakes KK Kletzer CNC Abkantpresse KKI EUROPA XL 6050 mm x 600 to, Y

Austria

1,783 km

CNC press brakes
KK KletzerCNC Abkantpresse KKI EUROPA XL 6050 mm x 600 to, Y

€217,900

EXW ONO plus VAT

Call

Condition: new, pressure: 600bending length: 6050column width: 5100daylight: 680stroke lenght (max.): 455column throat depth: 450messurements (LxWxH): 7100x3275x3910weight approx.: 50.2004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 45Standard Equipment:KK Kletzer Europa We have developed a high-quality model specifically for the European market:The CNC press brake by KK Industries, made in Turkey. Model: KK Kletzer EUROPA XL The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile offers a very large open height, resulting in a long cylinder stroke, and an extra-large throat depth to provide maximum flexibility during operations. We focus on delivering quality—reflected also in the control system:As standard, the machine comes equipped with the ESA S640 2D graphic controller. Additionally, the KKI EUROPA XL is equipped with CNC-controlled Y1, Y2, X, and R axes via the wning is also included and fully CNC-controlled through the same ESA S640. When it comes to tooling, we make no machine is fitted with premium top tools and dies from EUROSTAMP Italy. Dsdod Ehh Rspfx Ac Uowb Naturally, a machine is only as good as the service behind t’s why we rely on highly qualified staff with many years of experience in CNC sheet metal processing. Technical Highlights: CNC axes: Y1, Y2, X, and R Controller: ESA S640 (2D graphical interface) Backgauge with double linear guides and ballscrews Motorized CNC-controlled crowning system Heavy-duty height adjustment with handwheel(from 175 tons: on linear guides) Laser safety system on the upper beam CE-compliant safety equipment Various options available Optional Controllers: ESA S640 – 15” 2D Touchscreen: ¤ 4,520.00 ESA 675 W – 21” 3D Touchscreen (Windows-based): ¤ 6,485.00 DELEM DA-66T – 17” 2D Touchscreen (Windows-based): ¤ 10,165.00 DELEM DA-69T – 17” 3D Touchscreen (Windows-based): ¤ 16,350.00

See details

Auction

Horizontal machining center Heller MC 16

Województwo wielkopolskie

1,713 km

Horizontal machining center
HellerMC 16

€7,500

To the auction

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 31-44336, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle has been completely overhauled! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Pallet size: 400 × 500 mm Number of pallets: 6 Pallet change time: 9 s Max. workpiece size: 720 × 800 mm Max. workpiece weight: 500 kg NC rotary table: B-axis B-axis rotation range: 360,000 × 0.001° B-axis rotation speed: 40 rpm Dsdpfx Aozwd Htsc Uowb Tool holder: SK 63 Max. tool diameter: 150 mm Max. tool length: 227 mm Max. tool weight: 12 kg Spindle speed: 45–24,000 rpm Spindle torque: 48/72 Nm Spindle drive: 30 kW Feed rate X/Y/Z: 1–60,000 mm/min Rapid traverse X/Y/Z: 60,000 mm/min Feed force: 10,000 Nm MACHINE DETAILS Total connected load: approx. 60 kW Connection voltage: 400 V Mains frequency: 50 Hz Total weight: approx. 12,500 kg EQUIPMENT Chip conveyor Documentation/Manual

See details

Auction

Pneumatic slewing drive MECALAC Ahlmann AS 700

Niedersachsen

1,087 km

Pneumatic slewing drive
MECALACAhlmann AS 700

€21,000

To the auction

Condition: ready for operation (used), functionality: fully functional, shovel volume: 1.2 m³, Year of construction: 2017, operating hours: 1,650 h, Equipment: pallet forks, TECHNICAL DETAILS Earthmoving bucket volume: 1.2 m³ 4-in-1 bucket volume: 0.7 m³ Clamshell bucket width: 250 cm MACHINE DETAILS Maximum speed: 40 km/h Operating hours: 1,650 h EQUIPMENT Dsdpfozylz Dsx Ac Ujwb Pronar 2600 dozer blade, two-piece, fully hydraulic Pallet fork Note: The wheel loader has been reclassified as an agricultural towing vehicle up to 3.5 tons. A tested tow hitch and trailer socket have been installed for this purpose. This allows for the possibility of applying for a green license plate.

See details

Listing

Roll-off tipper truck MERCEDES-BENZ 4144 Actros MP2 Abrollkipper 8x8 Singlebereifung

Aichach

1,462 km

Roll-off tipper truck
MERCEDES-BENZ4144 Actros MP2 Abrollkipper 8x8 Singlebereifung

Call

Condition: used, mileage: 470,000 km, power: 320 kW (435.08 HP), first registration: 09/2004, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: red, gearing type: semi-automatic, emission class: euro3, Equipment: all wheel drive, * Mercedes 4144 Actros MP2 hooklift truck * First registration: 2004 * 470,000 km * Euro 3 * Telligent with clutch Dedpfx Acjy Ikixj Uowb * Leaf spring – leaf spring suspension * 8 x 8 * Meiler RK20 body * Container lock * Trailer coupling * Single tires: 600/50 R22.5 * Unladen weight: 14,300 kg * Wheelbase: 4.85 m

See details

Auction

Spain

1,481 km

Paper cutting machine
ZündXL 3200

€27,000

To the auction

Condition: used, Year of construction: 2017, operating hours: 1,113 h, machine/vehicle number: G30XL320839, TECHNICAL DETAILS Zünd G3 XL-3200 Plotter Vacuum system: 1–9 kW Tool heads Universal tool head UM-ZS G3, working width: 60 mm Universal tool head UM-ZP G3, working width: 60 mm Dwjdpfx Aezyktlsc Usb Operating hours: 1,113 h EQUIPMENT Zünd G3 XL-3200 Plotter, item no. 6343200 G3 vacuum system, CIC, item no. 6438104 ICC camera for S3/G3, item no. 6539101 UM-ZS G3 universal tool head, item no. 6531006 UM-ZP G3 universal tool head, item no. 6531007 Universal cutting tool (UCT), item no. 6532001 EOT-250 oscillating tool, G3, item no. 6532018 V-CUT tool, G3, item no. 6532021 Creasing tool type 1 (CTT1), item no. 6532051 Creasing tool type 3 (CTT3), item no. 6532053 Zünd Cut Center software package, item no. 6731200 Zünd Cut Center camera option, item no. 6731250 Zünd Cut Center V-Cut option, item no. 6731240 PC and monitor for Zünd Shipping costs for the plotter

See details

Auction

Vertical band saw automatic machine BAUER VG 550ZA

Sachsen

1,469 km

Vertical band saw automatic machine
BAUERVG 550ZA

€17,000

To the auction

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 3,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting range at 90° (round): 530 mm Cutting range at 90° (flat): 530 × 800 mm Cutting range at 45° (flat): 530 × 520 mm Cutting range at 30° (flat): 530 × 320 mm Cutting angle: 45° - 0° - 60° Blade speed: 20–120 m/min Feed length: 1,500 mm Dedpfxszyccxs Ac Uowb MACHINE DETAILS Saw motor power: 3.0 kW Coolant pump: 100 W Hydraulic pump: 370 W Power connection: 400 V / 50–60 Hz Dimensions & Weight Dimensions (L × W × H): 2,500 × 4,000 × 2,500 mm Total weight: 3,500 kg EQUIPMENT Machine stand with chip collection tray Hydraulic cutting pressure control Stepless blade speed control Hydraulic guide arm adjustment Minimum quantity lubrication Automatic shutdown at the end of the cut Chip brush Hydraulic miter adjustment Hydraulic clamping device Hydraulic blade tensioning Operating manual

See details

Listing

Metal Gringing & Edge Rounding Machine NS Maquinas DM 1100 ZC - NEUMASCHINE

Dietzenbach

1,231 km

Metal Gringing & Edge Rounding Machine
NS MaquinasDM 1100 ZC - NEUMASCHINE

Call

Condition: new, DM1100 ZC are metal deburring and edge rounding machines for metal sheet and parts cut by punching, shearing, laser or plasma. Removing burrs and creating round edges using cross belts technology is possible on parts up to 1100mm width and on some as small as 50x50mm. Inside and outside contours of stainless steel, steel and aluminum parts cut by laser or other thermal processes are burrs cleaned from the total surface. Technical Details - DM1100 ZC: Working capacity (mm) 1100x100 No. belt stations (Z) 1 No. cross belt stations (C) 1 Abrasive belt dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 10 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.9-13 Abrasive belt motor per head (kW) 18.5 Cross Belt Motor (kW) (2x) 3 Feeding motor (kW) 0.37 Total power (kW) 26.22 Consumption (A) 55 Dust extraction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2230x2300x2250 Djdjd Hintjpfx Ac Uswb Weight (kg) 3300

See details

Auction

Baden-Württemberg

1,405 km

Debarker
Cambio75/6A

€19,100

To the auction

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018/219, hole diameter: 75 mm, number of planer blades: 6, operating speed: 6 mm/s, year of last overhaul: 2018, For sale is a very fast and complete Cambio debarking system! In 2018, the machine was completely overhauled, and since then, it has been professionally maintained and equipped with a new knife ring with 6 cutting knives! The system can be directly integrated into your existing mechanization! TECHNICAL DETAILS Maximum log diameter: Ø 750 mm Minimum log diameter: 11 cm Shortest log length without an additional feed system: 3 m Dedpezx Eaqsfx Ac Uswb Shortest log length with an additional feed system: 1.5 m Maximum feed speed: 100 m/min MACHINE DETAILS Rotor motor: 55 kW Feed motor: 11 kW Hydraulic power: 1.5 kW Rotor speed: 220 rpm at 50 Hz Rotor opening: 80 cm Debarking rotor: 6-knife rotor Weight: 10,500 kg EQUIPMENT Complete infeed system Complete outfeed system Electrical system Hydraulics for the infeed rollers New 6-knife rotor from the 2018 overhaul Complete debarking system for integration into an existing mechanization Centering device ZV – 75/2 MA Number of horizontal conical rollers: 2 Drive power per SEW worm gear motor: 1.5 kW EQUIPMENT 2 horizontal conical rollers mounted in pneumatically actuated swivel arms SEW worm gear motors with torque supports in a solid steel design Heavy-duty inlet hopper Complete sensor system Outfeed system AW 800 Drive power: 3.0 kW EQUIPMENT Drive via SEW spur gear motor Machine frame made of welded rectangular tubes for supporting additional machine components Hydraulic shock absorbers

See details

Auction

Baden-Württemberg

1,301 km

Panel saw
HOLZMAOptimat HPL 380

€12,600

To the auction

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-240-06-8502, functionality: fully functional, power: 18 kW (24.47 HP), cutting height (max.): 95 mm, saw blade diameter: 380 mm, cutting length (max.): 4,300 mm, plate width: 2,200 mm, TECHNICAL DETAILS Cutting length: 4,300 mm Dodpfx Acszx Anxo Ujwb Panel width: 2,200 mm Saw blade overhang: 95 mm Main saw blade diameter: max. Ø 380 mm Saw carriage feed rate: up to 150 m/min Clamping jaws: 7 pieces MACHINE DETAILS Main saw motor power: 18 kW Scoring saw motor power: 2.2 kW Operating hours: approx. 38,544 h (as of 05.10.2023) EQUIPMENT Automatic rear panel loading system Lift table loading system Lift table Automatic program slider with clamping jaw feed Main saw unit Scoring unit Automatic cutting length and positioning control Angle and back stop Air cushion support tables in the operator area CADmatic operating and optimization environment PICA 108 label printer Roller and transport technology in the rear loading area Safety enclosure with protective fencing Dust extraction connections with machine-side dust extraction ducting

See details

Listing

Drachten

952 km

Press brake
AmadaHFE 400 6 L

Call

Condition: good (used), Year of construction: 2008, Used 6-meter CNC press brake by Amada Type: HFE 400 6 L Capacity: 6100 x 400 tons Stroke: 350 mm Y1, Y2, X1, X2, R1, R2, Z1, and Z2 CNC controlled 9204 operating hours Weight: 36 tons Transport in 2 parts (main frame + separate lower table) Self-adjusting crowning system in the lower table 450 mm mounted on the floor foundation Dismantling and loading included Djdpfx Aey T Hltsc Uewb

See details

Auction

Baden-Württemberg

1,301 km

Machining center
HOMAGCENTATEQ E-500

€16,000

To the auction

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-201-08-1422, functionality: fully functional, operating hours: 17,952 h, number of slots in tool magazine: 24, working width: 1,600 mm, spindle motor power: 15 W, number of spindles: 2, working length: 4,760 mm, Machining center with automatic material handling (serial number: 0-205-08-1424) TECHNICAL DETAILS Travel in X-axis: approx. 4,760 mm Travel in Y-axis: approx. 1,600 mm Dwedpfxezx Anfo Ac Usb Main spindles: 2 Power of main spindles: 15 kW each Tool interface: HSK F63 Number of drilling heads: 2 Tool changer: 2 × 12-position MACHINE DETAILS Control system: PC85 / woodWOP Operating hours CNC: 17,952 h EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveyor system Portal handling Vacuum crossbar Conveyor technology C-axes FLEX-5 preparation Automatically positionable vacuum clamps Liquid ring vacuum pumps Note on machine designation: BOF 712/48/16/AP was the actual historical machine type. CENTATEQ E-500 is the later/current model designation, which is now visible on the machine.

See details

Advertise here