Concrete pump truck

De Buf Beton-Mischer 9m³/Sermac 24m Betonpumpe

Condition: not inspected (used), Year of construction: 1984, Turning length max. 1200 mm turning Ø max. 250 mm 2 hydraulic scanning supports Gkodpfx Aop Dt Twjayjf spindle motor 5,5 kW hydraulic motor 2,2 kW

Condition: used, mileage: 117,898 km, Year of construction: 1978, Serial number: 100xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21424 Specifications: 1978 model 117,898 km Rep. Object 205 hp 6x2 Manual transmission Tires (see pictures) Rust of the rear housing (see pictures) Frame sand blue and varnished a few years ago Battery needs to be replaced. Tipping box Foldable aluminum limbs Internal length in plan: 6,115 m Internal width in plan: 2,475 m Light Heater Ready for delivery   Crane specifications: 1979 model 10 t/m crane 2 Hydraulic outriggers 2 Hydraulic extensions 1 Hydraulic extension on main boom 1 Manual Manually controlled Ready for delivery Gjdpfexgcrgjx Aayokf   Description: We have a 1978 Scania LB 81 6x2 Crane truck w/ 10t/m crane and tipper ekt for sale. The car is being sold as a repair item as it is no longer EU approved and there are errors and defects. There is a bad battery on the car, these should be replaced. Starter is starting to get bad. Errors and deficiencies exist and some cost must be taken into account to get it back in good condition. Ready for delivery Km: 117898 HK: 205 Technical approved: no EU-approved until: 28.02.2019 Own weight: 10100 Model: LB 81 6x2 Kranbil m/ 10t/m kran og tipp ekt Gearbox: Manual

Condition: used, mileage: 143,413 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,325 mm, overall weight: 3,500 kg, empty load weight: 2,550 kg, maximum load weight: 950 kg, first registration: 03/2011, next inspection (TÜV): 03/2025, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, CO₂ emissions: 259 g/km, emission class: euro5, color: yellow, driver cabin: other, suspension: other, number of seats: 2, Year of construction: 2011, total length: 7,057 mm, construction height: 2,690 mm, fuel: diesel, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Engine failure. The Mercedes-Benz Sprinter 310 CDI Maxi Euro 5 box van offers a solid base for commercial users. This used commercial vehicle from 2011, first registered on March 17, has a mileage of 143,413 km. It is powered by a 2,143 cc, 4-cylinder diesel engine with an output of 95 hp (70 kW), which meets the Euro 5 emissions standard. The Sprinter is equipped with an automatic transmission and rear-wheel drive, making it ideal for transport tasks. It has room for two people inside, and the cargo area is equipped with shelves, making it useful for a variety of applications. The vehicle has a yellow paint job and a green environmental sticker (4). The vehicle's general inspection is valid until March 2025. Gsdpouag N Iofx Aayokf With a combined fuel consumption of 9.8 l/100 km, the Sprinter is efficient for its class. CO2 emissions are 259 g/km. The vehicle's dimensions are 2,694 mm high, 2,100 mm wide, and 7,057 mm long, with a wheelbase of 4,325 mm. The gross vehicle weight is 3,500 kg. Please note that this model has engine damage. Inspections are possible without prior notice. Sale only to businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: good (used), Opening: 620 x 350 mm Rotor-diameter x -width: 1.060 x 610 mm Gkedpfx Aslgzrheayef feed size hardrock -180 mm feed size limestone -300 mm, complete with E-drive, conveyor and steel-construction

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 193 34-41, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,600 mm, table load: 2,500 kg, spindle diameter: 102 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 1,600 rpm, total height: 3,500 mm, total length: 6,500 mm, total width: 4,700 mm, table length: 1,400 mm, table width: 1,250 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, The machine was overhauled and modernized in 2025 and is immediately ready for operation! Travel paths: - Table cross travel (X-axis): 1600 mm - Spindle head vertical travel (Y-axis): 1250 mm - Table longitudinal travel (Z-axis): 1475 mm (restriction due to large table) Gkodpfew Rn R Rex Aayef - Quill travel (W-axis): 710 mm - Table rotation (B-axis): 360 degrees Clamping table: - Clamping surface: 1250 x 1400 mm - Table load capacity: 2.5 t Spindle: - Diameter: 102 mm - Tool holder: DIN2080, SK 50 - Infinitely variable speed: 4 – 1600 rpm - Drive power: 13 kW Feed: - X, Y, Z axes, stepless: 1 – 4000 mm/min Rapid traverse: - X, Y, Z axes: 4 m/min Power consumption: 42 kW Weight: 10 t Space requirements (L x W x H): 6.5 x 4.7 x 3.5 m Equipment: - Heidenhain TNC 320 - Coolant device

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. Godsq Nyzbjpfx Aayjkf 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 92 880 13, opening: approx. 1.030 x 720 mm rotor-Ø x –width: 1.000 x 1.000 mm weight: approx. 13 t. Gjdpfxelhrufs Aayekf

Condition: reconditioned (used), Year of construction: 2007, -Primary impactor crusher, Laron Model IM 16 -Complete mobile or stationary assembly. -New rotor bearings -New rotor hammer bars Semi-new front palate Production capacity 800 Tm/hour. -Intake mouth 2320 x 1700 mm. Engine 600 hp. -New bearings and supports. -New rotor striker bars. Gsdpjimwg Hofx Aayokf -Feeder of articulated plates width 2000 mm length 10,000 mm. Reducer and motor 40 hp. Semi-new condition of the feeder. Pre-screener of discs width 2000 mm diameter 1000 mm. reducer and electric motor. -Hopper with capacity for 40 m3. screwed and dismountable by parts for its transport. -The whole set is mounted on a chassis with coupling for tractor head and transportable on dolly axles. We have secondary hammer mills, screens and conveyor belts to complete a plant.

Condition: used, mileage: 280,163 km, lifting height: 35,500 mm, Year of construction: 2014, operating hours: 7,979 h, Drivetrain Drive: Wheel Weights Empty weight: 31.787 kg Functional Lifting capacity: 15.000 kg Identification Serial number: 782002 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 0x0x0 Gsdpfx Aasvf A Trjyekf Additional information Please contact PFEIFER GROUP for more information

Condition: ready for operation (used), Percussion Mill MFL Gkedskwzp Tjpfx Aayef Brand: MFL Type: RCL 140-160 Feed Opening : 1700 x 1000 mm Driving: E-Motor 250-300 kW.