Roll-off container

CONTAINER A PIANALE NUOVO SENZA SPONDE

Condition: used, Year of construction: 2003, Technical details: pressure: 40 t box opening: 1200 x 730 mm material: Pappe,Plaste - cardboard bottles voltage: 400 / 50 V / Hz total power requirement: 16,4 kW transport measurements machine: 6,5 x 6,2 x 2,7 m Fully automatic hydraulic CHANNEL BALL PRESS for recycling with conveyor unit/conveyor belt LxW: 4500x1000mm motor driven with automatic binding unit 3-fold bale count display/counter Hsdpfxju Nw Ezs Ag Ueng bale chamber LxWxH: 1800x800x800mm with 1,2m³ volume bale size LxWxH: 800x800x300-1600mm Filling opening LxW: 1200x730mm: Filling height 1200mm Hopper size LxWxH: 1200x1200x1400mm; filling height 2500mm *

Condition: good (used), Year of construction: 1996, Weinig Unimat 23 four-side planer Hjdpfxoh Dwl Do Ag Ujng - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 42,000 kg, axle configuration: > 3 axles, brakes: retarder, color: grey, gearing type: automatic, loading space volume: 20 m³, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Internal reference number for enquiries: 5-081----MAN TGS 41.540 8x4 BB High-end Tipper Truck!!! "TECNOCAR Emil-Camion S4" NEW AT PAVIC -> Available in the following colors: Traffic White, Deep Orange, Nardo Grey (as listed), Ultramarine Blue, Metallic Grey ----Vehicle Data: * MAN D2676 LFBI diesel engine, 397 kW (540 HP), 2,650 Nm torque, Euro 6e * MAN TipMatic 12.28 OD with Retarder 35 * Power take-off, transmission-driven * MAN TipMatic driving programs: Performance, Efficiency and Offroad, up to 70,000 kg * 8x4 drive * Leaf/leaf suspension * Differential locks on driven rear axles * 2,505 mm main wheelbase, 1,400 mm wheelbase between rear axles * Fuel tank capacity 390 l, AdBlue tank 35 l * Disc brakes on both front axles, drum brakes on both rear axles * NN cab: the practical (narrow, medium length, standard height) * Mechanical tilting roof * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and seat heating * Sunblind for door windows, interior, mechanical, driver's side * Refrigerator * MAN SmartSelect infotainment control with touchpad and direct access buttons * Leather multifunction steering wheel, height and tilt adjustable * MAN Professional Media System Navigation 12.3 inch * MAN Advanced Sound System * Navigation map Europe * Smartphone integration * 50mm trailer coupling * Electronic Stability Program (ESP) * Traction control system (ASR) * Cruise control (FGR) * Emergency brake assist EBA Plus * Turn assist * Attention alert system MAN AttentionGuard, non-deactivatable * Preparation for Alcohol Interlock, non-bypassable * Front Detection, deactivatable * Traffic sign recognition * Reversing Motion System * Without distance warning * Without MAN SafeStop Assist * UN/ECE-R 141 (Tire Pressure Monitoring System (TPMS)) compliant * UN/ECE-R 151 (Blind Spot Information System (BSIS)) compliant * UN/ECE-R 155 (Cybersecurity Management System (CSMS)) compliant * UN/ECE-R 156 (Software Update Management System (SUMS)) compliant * UN/ECE-R 158 (Reversing Assistant) compliant * VO (EU) 2021/1243 (Alcohol-sensitive immobilizer (Alco-Lock)) compliant * VO (EU) 2021/1958 (Intelligent Speed Assistance (ISA)) compliant * VO (EU) 2021/1341 (Driver Drowsiness & Attention Warning (DDAW)) compliant * UN/ECE-R 159 (Pedestrian and Cyclist Collision Warning System) compliant * 1 set of floor mats * 1 set of seat covers Hnjdpfx Asxwlnxog Ujg Superstructure Data: Premium quality tipper body from the market leader EMILCAMION, Italy * 20 m³ * Steel construction made of HB 450, 8mm floor, 6mm sides * Hydraulic rear door * Side and rear reflective contour markings * LED side marker lights * Stainless steel mudguards * Stainless steel cladding parts * Spare wheel holder * Stainless steel toolbox on passenger side * Manually foldable rear bumper * Electric tarpaulin, black * Two-tone paint finish (e.g.: NARDOGRAU AUDI LY7C, door frames and tailgate black) * Vibrator electrically operated via remote control * Protective grille for rear lights * Water tank * Folding ladder on driver’s side Financing / hire-purchase, as well as leasing / partial amortization leasing available with our leasing partner. If you have any further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Year of construction: 2024, condition: new, arm length 5 m total column height 5,5 m weight max. in kg 80 kg travel of hook 4,3 m *NEW*Never used*OVP* Pillar jib crane - lifting capacity 80 kg with electric chain hoist, crane DEMAG type DCM-Pro 2 80 1/1 HV.3 V16/4 Year of manufacture Hook path max. 4.3 m Hedpfx Asvzhhtjg Ueng Chain size 4.2 x 12.2 RDC/TDK Mains connection 380 - 415 v Uc: 24 v

Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm max. tool length HSK A100: 500 / 800 mm max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Hjdsvy Ihdopfx Ag Ujng Accelaration X: max. 1,5 m/s² Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) - 2 positioning axes (B, C) - tools upon request

Condition: reconditioned (used), Year of construction: 2005, Coupling containers, 30–32 m³, suitable for screw compactors, available for right or left configuration. Used, fully functional coupling containers from €4,000, depending on condition, excluding VAT. Delivery possible. Hnedsgypd Hopfx Ag Uog

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF200MK is the ideal multi chamber waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 200 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 16 Ton Bale weight: up to 200 kg (material depending) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine size: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Loading aperture: 1100 W x 800 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Hodpfx Asvugz Eog Uong Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Short processing time because there is always a chamber available for loading Retainer for reducing the material spring back Reel holder for 8 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Extra chamber (up to 6 chambers in total) Strapping rolls Twin Chamber Waste Baler, Multi Chamber Waste Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: good (used), Year of construction: 2009, functionality: fully functional, Weight 4950 kg, total weight 12000 kg 5.5 kW Hnsdjwpmckepfx Ag Ueg

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0370250754, Item 23374 Hydraulic Welding Rotating and Tilting Table – Three-Axis Welding Manipulator Technical Specifications: - Max. load capacity 3000 kg Hnjdov Rbivepfx Ag Ueg - Faceplate diameter 1000 mm - Min. table height in horizontal position approx. 1070 mm - Max. table height in horizontal position approx. 1970 mm - Faceplate motor-rotatable + swiveling or tilting - Rotation movement electrically continuously adjustable approx. - Right-hand + left-hand rotation - Welding current transmission approx. 700 A - 400 V drive - Connected load 4.0 kW - Hand-held remote control for direction of rotation, swiveling or tilting - Space requirement approx. W 2250 x H 1070 x D 1350 mm - Weight approx. 2000 kg

Condition: used, Year of construction: 2015, operating hours: 11,000 h, functionality: fully functional, Processing and dosing system for green waste, wood chips and fuel from biomass consisting of: - 2 x feed hopper 1,500 x 8,000 mm, with dosing and equalization stages - Drum screening system 2,300 x 7,000 mm, screening drum 15 mm² - Overband magnetic separator Permanent magnet - Disc separator 1,500 x 4,500 mm, separating cut 15-100 mm² - Elevation, steel construction - Conveyor belts, distribution belts - Switch cabinet with control system Manufacturer: Rudnick & Enners Project no.: AF4 167 C Year of construction: 2015 Operating hours: approx. 11,000 h Location: Hesse (Germany) Availability: August 2024, by arrangement Service details: The system is in very good technical condition. Hedpotynftjfx Ag Usng Warranty: The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects All prices are ex works, net plus VAT, excluding dismantling, packaging, transportation and crane provision! We reserve the right to prior sale, changes and repairs. This overview is for your information only and does not constitute a binding offer.