Hydraulic press

2000T

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Bwsdpszd Uv Eefx Afmsw Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Bwedpswbginjfx Afmsw Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000

Condition: excellent (used), Spindle: 40 mm / 30 mm • Motor power: 7.5 kW • Table length: 250 cm • Table width: 80 cm In very good condition. Bodpfxeyxnxle Afmjww

Condition: used, Colour: Green Empty weight: 8.000 kg - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 1000 - Table width [mm]: 600 - Table bore diameter [mm]: 140 - Ram length [mm]: 300 - Ram width [mm]: 300 - Height adjustment [mm]: 250 Bwedpozxhxiefx Afmjw - Column spacing length [mm]: 2000 - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Bsdpfjxlcp Nox Afmeww Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: used, CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, hermetically sealed, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, left-hand door stop, one-hand operation, lockable. Insert shelf: stainless steel, support area 970 x 980 + 500 mm load per shelf max. 35 kg total load with max. shelf load 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: Bjdpfxozg Twao Afmjww 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Plain text error messages RS 232 interface free switching channels for on-site control of the test item Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation and without additional devices. Dimensions: Test volume: 2000 liters Test chamber dimensions: height 900, width 975, depth 2200 mm External dimensions: height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, non-pressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2349, Demag hall crane, portal crane, single-girder crane, including steel structure with floor control. Dimensions of the steel structure approx. 7.5 x 4 m with 1x Demag bridge crane, 2 tons. Payload/lifting capacity: 2000 kg - 2 tons. Technical data of the system: Crane track/steel structure consisting of HEB160 and IPE300 beams. Bwodpfx Afjz Tdb Uomjw Length of steel structure approx. 6 m Length of running rails approx. 7.5 m Total width of steel structure approx. 4 m Total height of crane approx. 4.64 m Top of running rails approx. 4.4 m Bottom of running rails approx. 4.15 m Hook height approx. 3.2 m Base plates at the supports approx. 40 x 40 cm. System is delivered complete: Steel structure/supports made of HEB160 (embedded approx. 10 cm), running rails IPE300 incl. power rail/power supply. 1x single-girder crane with 2000 kg Demag PK10 chain hoist with floor control. Crane is disassembled and immediately available. The location of the item is 75053 Gondelsheim. Very good condition, see pictures. Shipping by freight forwarder or collection by appointment only.

Year of construction: 2004, condition: good (used), Newsmith Crate / Tray Washer Up to 800 crates / hour All stainless steel Wash pump with detergent or soap agent facility Rinse pump with rinse agent facility Adjustable wash temperature controls Drive conveyor with 3 speed control selector All safety controls and e-stops Gas burner (can be changed to oil) Bjdpoma E Hcjfx Afmoww Complete with extractor fan Ready for use

Year of construction: 1989, condition: like new (used), Spindle diameter 30 mm Bjdehi Tv Hepfx Afmsww 5.5 kW engine power 5 speeds 3000/4500/6000/8000/10000 U / T 1989 Can be purchased without advance

Condition: used, Year of construction: 2011, turning diameter max. 320 mm turning length max. 810 mm control MSX-701 IV greates pass round over bed 800 mm Swing dia. over traverse guideway 800 mm distance between spindles 1.130 mm Number of revolutions max. 5.000 rpm power capacity - main spindel 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm Number of revolutions max. 5.000 rpm power capacity - Sub spindle 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. Bodpfx Aov E R E Nsfmjww x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm Traverses Subspindle B: 870 mm rapid traverse ( X / Y / Z ) 1: 30 / 20 / 50 m/min rapid traverse ( X / Y / Z ) 2: 30 / - / 50 m/min Tipp feed 0 - 5.000 mm/min total power requirement 94 kVA weight of the machine ca. 8,3 t dimensions of the machine ca. 10,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: used, scrubber dryer, floor cleaning machine, mop machine Bjdec R S E Sepfx Afmeww -Handover in the current condition as inspected -Device is without battery brush and suction bar -Working width: 500 mm -Charger -Quantity: 1 piece available -Dimensions: 1150/520/H950 mm -Weight without battery: 66 kg

Condition: new, Automation cabinet, control system cabinet, switchgear cabinet, Siemens SPPA - T2000 Control system and cabinet design Siemens switchgear cabinet, SPPA - T2000 AS 620B R903, Siemens 8 MF cabinet SPPA FUM R standard cabinet 6DP2623-1GG10-0XX0-Z Switchgear cabinet, Siemens sppa-t2000 8 MF cabinet AS 620 B R903 6DP2623-1GG10-0XX0-Z B15+Y88 Y88=A5E03444617 B15: with cross-connection Component set for earthquake reinforcement, front and rear Double doors 2 x partition wall Transporting eyelets Cabinet indicator lamp Height × Width × Depth: 2200 × 900 × 400 mm Protection class IEC60529: IP20 Protected against solid foreign objects (diameter ≥ 12 mm), no protection against water Central unit module carrier: 1 x reduced AP FUM-B-BGT: 3 x EU 903 module carrier with 2 x Profibus connection, IM616 and control system monitoring with 1 x Fum210 Sys 36 fuse slots Color: RAL 7032 switchgear cabinet, Siemens Module designation Fum210/6DP1210-8BC Teleperm XP Binary module Profibus connection interface module IM616 6DP1616-8BA Bwedpfx Afotzbdkjmjw More items in other sizes - new and used - can be found in our shop! International shipping costs available upon request!

Condition: excellent (used), Floor plates 6000x2000x400mm, with T-slots. 8 pieces available. Bedpfxef H Hgfe Afmsww Weight: 11.5 tons/piece.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Bwjdpfeu D Dhxex Afmew Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Bjdpfxjz Hwhye Afmoww Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T