Plate shear

LVD MVSB 62/16

Condition: excellent (used), Year of construction: 1980, overall weight: 32,000 kg, total width: 8,000 mm, total length: 6,000 mm, total height: 4,200 mm, sheet thickness (max.): 8 mm, Flanging and dishing machine BOLDRINI - PAO 165 / 4700 Tedpfovcy Dcjx Ahuef Max. workpiece 4700 Ø Maximum sheet thickness 8 mm

Condition: new, Year of construction: 2024, Container turning device 10 tons lifting capacity Tjdpfjifk Rbex Ahujf Double drive Synkron Axle distance steplessly adjustable by means of thread speed infinitely variable with foot remote control diameter from 300mm to 3500mm Roll width and diameter 120 x 270mm Speed 200 - 1200 mm/min.

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Tsdpsf Epznjfx Ahuof Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: good (used), Year of construction: 1987, turning diameter over cross slide: 810 mm, spindle bore: 130 mm, turning diameter: 1,140 mm, turning length: 7,500 mm, quill stroke: 300 mm, total length: 7,500 mm, total width: 2,300 mm, total height: 1,650 mm, bed width: 600 mm, Please note: not original pictures its only 3000 length not 5000 mm   3 Guide way construction 2 Axis HeidenHain Digital readout Feed in 3 directions all tool post slide Central lubrication   Work load flying in chuck 2500 kg Work load NOT supported 8500 Kg Work load supported 10000 kg   Optional 4 chuck approx. 1200 mm Optional 4 chuck approx. 1500 mm Optional package with 3 steady rest fixed model from  .... to ....  Turning length: 5000 / 7500mm Turning diameter bed Ø: 1140mm Turning diameter slide: 810mm Turning diameter pit Ø: 1500mm Pit length: 2500mm Spindle bore: 130mm Bed width: 600mm Quill: 130Ø Quill stroke: 300mm Spindle mount: 6Mk Tedov S Dp Ijpfx Ahuof Power: 25kW Speed: 9 - 900rpm Length: 7500mm Width: 2300mm Height: 1650mm Weight: 12000kg

Condition: excellent (used), Year of construction: 2005, pipe Ø 25 – 60 mm wall thickness 1 - 4 mm coil Ø max. 3.000 mm coil weight max. 10 t finish pipe length 3.600 - 8.500 mm round pipe Ø 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm speed max. 100 m/min working direction left → right The line consists of: decoiler crop shear welding table edge trimmer with scrap cutter scrap conveyor Tedpeuc Shusfx Ahuef strip edge preparation entry table forming part internal scraper/outer scraper cooling zone calibrating part testing and length measuring cutting ejector for reject pipes blow-off station oiling station bundle station banding station bundle extraction electrics

Condition: used, Year of construction: 1998, pressure 175 t chamfer lenght 4050 mm distance between columns 3050 mm throat 300 mm Todotv Rh Aepfx Ahuef stroke 240 mm stroke speed - idle stroke downwards max. 140 mm/sec working feed max. 9 mm/sec stroke speed -return max. 130 mm/sec distance between table / ram min. 370 - max. 610 mm control CYBELEC DNC 880S total power requirement 15 kW weight of the machine ca. 15 t dimensions of the machine ca. 5,89 x 3,6 x 3,16 m Features: - Controlled axes: Y1, Y2, X, R - CNC crowning - CYBELEC DNC 880S control - Swivel control, front right - 4x manually adjustable stop fingers - Foot switch - 1 set of upper tools - 1 set of lower tools - 2x material support arms at the front - Side + rear protective device - Operating instructions

Year of construction: 2012, condition: good (used), Manufacturer: Gipo AG Type: B 1370 Year of manufacture: 2012 Inlet size: 1.320 x 680mm Included: – Frame Tjdpfx Aheilh Efsujf – Pre-Screen – Electrical motors for Crusher and Pre-screen Spare jaws in stock!

Condition: refurbished (used), PORTAL STRAIGHTENING PRESS PRESSURE 450t WORKING AREA LONG: 5200mm Tjdjfcnu Ijpfx Ahuef WIDTH: 2300mm HEIGHT: 1000mm

Year of construction: 1989, condition: excellent (used), Article number: MA1060 Manufacturer: Fasti Type: 509/40/6 Year of construction: 1989 Tjdped Ac D Refx Ahusf Machine number: 5888 Control: Omron was renewed in 2012 Length [mm]: 4850 Width [mm]: 2450 Height [mm]: 2100 Weight [kg]: 10900 Power supply: 380V / 16.5 KW Working range [mm]: 4000 Maximum sheet thickness [mm]: 6 Blade length: 4000 Length stop: front 5000 mm / rear gauge 1000 mm Accessories: manuals / schematics

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, workpiece weight (max.): 130 kg, center width: 600 mm, grinding wheel diameter: 450 mm, total width: 2,110 mm, total length: 3,120 mm, total height: 1,435 mm, grinding diameter: 350 mm, quill stroke: 30 mm, grinding wheel width: 50 mm, grinding spindle speed: 2,000 rpm, overall weight: 3,100 kg, Max. Sanding diameter: Ø350mm Max. Workpiece weight: 130 kg Sanding length between centers: 600 mm Sanding spindle speed: 1500 or 2000 rpm (manual belt change) Standard grinding wheel: Ø 450 x Ø127 x 50 mm Grinding wheel width: from 25 to 50 mm Z-axis travel: 750 mm X-axis travel: 265 mm Grinding spindle power: 3.7 kW Including the following standard accessories: - 120 liter coolant tank with 0.4 kW pump (200 l/min) and magnetic separator Tjdpec Tnq Iofx Ahusf - Hydraulic tailstock - Removable splash guard - Hydraulic unit - Standard grinding wheel Ø 450 x Ø127 x 50 mm - 1 grinding wheel flange - 1 grinding wheel flange Dresser - Dressing holder with dressing diamond on tailstock - 2 centering centers - Dial gauge for table adjustment to 0 - Machine light - 3 unscrewable hooks for transportation by crane - Leveling screws with mounting plates - Machine documentation Including the following special accessories: - Internal grinding device - Inverter (Mitsubishi) for speed control on the work spindle - Inverter for speed control on the grinding spindle with 5.5 kW motor, incl. display - 2-axis digital display Heidenhain ND 780