Vacuum pump, rotary vane vacuum pump Rootspumpe

Leybold Ruvac WSU 2001

Condition: used, Rotary vane vacuum pump - oil lubricated Manufacturer: Leybold Type: Sogevac SV 200 Kjdpfjcnyy Hsx Ampodk Cat. No.: 10927 Status: Refurbished Warranty: 12 months Included: Oil filling (mineral oil), operating manual with list of initial files Voltage: 50/60Hz 230-400/460V Motor rating: 4 KW N. suction capacity: approx. 200 m³/h Final pressure without gas bellow: approx. 0,08 mbar Delivery time: ex stock

Condition: good (used), Year of construction: 2004, functionality: fully functional, Manufacturer: HABERMEHL Anlagenbau GmbH Address: Hauptstr.1, 35510 Butzbach-Ebersgöns, Germany Type: EH 400/1 Serial number: 901 Year of manufacture: 2004 Voltage / Frequency: 400 V / 50 Hz Rated power: 3 kW CE-certified: Yes 🛠️ Device Description Industrial shredder or crusher (Shredder/Granulator). Notable features visible in the photos: - System with rotating knives (shredding unit) on a 2 mm shaft - 3 kW SEW motor and reduction gearbox - 8 mm screen (the screen is labeled “8 mm Sieb”) – determines the output particle size - Rollable, portable design - Material discharge container and lower motor drive system Machines of this type are typically used for shredding the following materials: - Plastics - Rubber - Wood Kodew Niuhjpfx Ampodk - Light metal chips - Electronic scrap 📝 Technical information you should request If you require further details, you may request the following information from the supplier or manufacturer:

Year of construction: 2009, condition: excellent (used), PLC for CNC machine TECH/Morbidelli. Kjdeflvhbopfx Ampjdk

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. Ksdsuf Sy Aepfx Ampjdk If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: ready for operation (used), Year of construction: 2011, Gas semi-trailer cryogenic for LNG (Liquid methane). manufacturer: CRYOCAN EU registration. Year: 2011 Volume: 50,25 м3 Vacuum certificate We have also other tankers for LIN, LOX, LAR, LNG und CO2, Kdodpstulh Ijfx Ampjk argon, oxygen, nitrogen and carbon dioxide, hydrogen We will be glad to answer your questions via Phone and E-mail

Year of construction: 2022, condition: new, 1 x Niro-Tech poultry cone deboning system (single-line) with cutting table. Features auto ejection of empty carcass at the end of the line. Speed – Variable, up to 700 birds / hour. Kdedpfx Amshr Rp Dspjk Overall dimensions - 5000mm L x 900mm W x 1100mm H approx. Electrical supply - 400v, 50hz, 3 phase.

Condition: new, Year of construction: 2024, Operating massive working pieces? Then this CNC laser machine would be the ideal option. The Wattsan 2030 Flat Bed is a laser cutter designed to work with large materials. There is no need for extra preparation; go right to work! This CNC laser machine has a table size of 2000x3000 mm. It also includes a trash collecting container, which will make the job much more enjoyable. Wattsan 2030 can cut materials such as cloth, plywood, cardboard, rubber, acrylic, plexiglass, and wood. You can give our managers a call for additional details! Wattsan 2030 Flat Bed characteristics Working area: 2000x3000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 2400 x 3750 x 800 mm Packing size: 3860 x 2540 x 1020 mm Weight: 1075 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine. Kodpfx Amsry Uf Ajpedk

Year of construction: 1999, condition: used, System: Used decanter / centrifuge Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Year of construction: 1999 Hoechstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Frequency converter: Yes Documentation: Yes Maintenance: regularly twice a year Kdodpfx Amjcbukrepsk In operation: By early 2015 Buying and renting possible.

Condition: refurbished (used), The reconditioned vacuum pump is available from stock and ready for immediate use. We recommend that it is only installed by trained personnel. Adaptation material available on request. Oil filling: M-VAC 100 Technical data: Ksdpfx Asq S N Iiempjdk 50Hz / 5.5 kW / 11.5/6.6 A Final pressure with open gas ballast: 0.35 mbar Final pressure with closed gas ballast: 0.25 mbar Subject to prior sale! This offer is only valid for customers within Germany and in European countries!

Condition: as good as new (ex-display), PUMP WITH ATEX CERTIFICATION Rotary vane vacuum pump in oil bath. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 30 m3 / h at 50Hz. Kdjdpsftzgxjfx Ampok Final vacuum: 1x10^-3 mbar abs. Any clarification, do not hesitate to contact us.