Jetty

LAYHER AR Roostervloer 2.07m gebruikt

Condition: good (used), Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) Gsdeib H Ddjpfx Aafjka - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Condition: used, functionality: fully functional, Please contact Bart Hoogakker for more information Gkodpfjw Ei Rcjx Aafja

Condition: new, Year of construction: 2025, machine/vehicle number: 712520122, FRUMECAR ECA 3000 fully mobile concrete plant Condition: NEW Capacity: 120 m³/h Mixer: Sicoma MAO Mixer size: 3 m³ Cement silos: 2 x 55 tons Gksdpshd Na Uefx Aafoa Guarantee: 1 year from startup More machines and mixing plants on our website Further information: Intended use: Construction industry Usable material: Concrete Overall condition: very good Technical condition: very good Visual condition: very good

Condition: good (used), Year of construction: 2000, fuel type: electric, Weights Empty weight: 2.900 kg Functional Mast: articulated arm Lifting capacity: 215 kg Working height: 1.200 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 600 m Additional information Please contact Christian Theißen for more information Manufacturer: Sky High Model: ST120 Year of build: 2000 Condition: Used Data: Max. working height: 12,00 m Max. platform height: 10,00 m Max. reach: 6,00 m Drive type: Battery Total dimensions LxWxH: 4,75 x 1,50 x 2,40 m (1,85 m) Platform dimensions LxW: 1,10 x 0,65 m Max. basket load: 215 kg Swivel range: 2x 359° endlos Empty weight: 2.900 kg Gkjdpfozdq Rxox Aafsa Special features: Very narrow and short stage, usable on solid and even ground indoors or outdoors.

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. Gsdpfeq E Ti Hex Aafska If you want to try it, please bring cable.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 14,300 h, Metso Nordberg HP200 – Cone Crusher for Sale Operating hours: 14,300 Condition: Fully operational, currently in use, regularly serviced Machine Description We offer a Metso Nordberg HP200 cone crusher – one of the most proven and efficient machines in its class. The crusher is still in daily operation, maintained according to manufacturer recommendations and kept in very good technical condition. Ideal for producing high-quality aggregates in both stationary and mobile installations. Key Features - High crushing efficiency and consistent product quality - Excellent performance on hard and medium-hard materials - Hydraulic closed side setting (CSS) adjustment - Stable operation and low wear costs - Reliable, robust design commonly used in European quarries Technical Specifications (HP200) - Head diameter: 940 mm - CSS range: 6–38 mm (depending on configuration) - Maximum feed size: 185 mm - Motor power: 132 kW - Capacity: up to approx. 250 t/h (depending on application and settings) - Crusher weight: approx. 12,000 kg Gkedpjxyi Rijfx Aafsa Details of the Offered Unit - 14,300 operating hours - Fully operational, in continuous use - Regular maintenance and service records available - Inspection of the machine in operation is possible

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Gedpfsvwbp Aex Aafska

Condition: good (used), functionality: fully functional, Various Layher Base Jacks Used – Adjustable Base Supports for System Scaffolding Looking for used base jacks for system scaffolding? We offer a wide range of original Layher Allround base jacks, including both fixed and tiltable versions, with different lengths such as 0.48 m and 0.60 m. These steel screw jacks provide a stable and height-adjustable foundation for your scaffold structure, even on uneven surfaces. Suitable for professional use in construction, industrial, and renovation projects. Examples of available models: • Layher AR Base Jack 0.60 m – Fixed Model For standard Allround scaffolding, coarse thread for quick adjustment • Layher Base Jack 0.60 m – Coarse Thread (Non-Branded) Gedpfx Ajw Ddavsafjka Compatible with various systems, extra robust • Layher AR Base Jack 0.48 m – Fixed Model Compact design, ideal for limited build heights • Tiltable Base Jacks – Used Flexible application on slopes or uneven terrain (available on request) Benefits of Used Base Jacks: • Fully functional, professionally inspected • Made of galvanized steel, suitable for heavy-duty use • Perfect for height correction and levelling • Coarse thread for fast, precise adjustment • Excellent price-to-quality ratio compared with new material _____ International Trade via BuildingEquipment.eu Our used base jacks are not only suitable for customers in the Netherlands, but are also delivered worldwide by us. Unique advantages: • Worldwide delivery: by pallet, container, or freight carrier • Complete export documentation & bulk quotations available • Can be combined with scaffold frames, brackets, ledgers, and more

Condition: good (used), total length undivided: 3000 mm Gjdpfx Aashwwfxjfjka edge heigth: 90 x 90 mm

Year of construction: 2026, condition: new, The equipment is generally considered project stock or, depending on availability, can be offered as a demonstration machine. Application: Accurate dosing of free-flowing products in precise quantities. Scale Features - Easy operation - Fast and uncomplicated cleaning - Low maintenance requirements - Tool-free assembly and disassembly of all product-contacting format parts - Low maintenance requirements - Corrosion-resistant stainless steel construction (1.4301) - Entire control system integrated within the machine housing - Continuously adjustable vibration system for optimal product flow - High accuracy through combination weighing Technical Data - Number of weighing heads: 10 - Weighing hopper volume: 2.5l - Weighing range: 10 - 1000g / 2,500g - Accuracy: ±0.2-1.5g - Speed: 60 bags/min (depending on product) Gkjdpfx Aasq T R Sbjfja - Control panel: 7" touchscreen display - Power: 1kW / 230V / 50Hz - Dimensions (LxWxH): 1620mm x 1100mm x 1110mm - Machine weight: 380kg