Industrial robot

KUKA KUKA Justage set KTL KRC4 / KRC2

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. Ibjdpfjrq D Niex Algea The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Article number: 8143983 Serial number: 143983 Ibedevzxg Tspfx Algja The KUKA KRC4 linear axis is a high-precision and robust motion unit that is ideal for industrial applications. It ensures precise control of motion sequences and plays a central role in automation processes and robotic systems within production. Its stable construction ensures consistently reliable performance, even in the most demanding applications.

Condition: excellent (used), Year of construction: 2011, *The video is just an example of how this cell can be prepared. Grinding cell with Kuka KR 180 grinding robot Berger grinding cell 2012 (external grinding A1) - Total weight approx. 6300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture 2011 - KRC 4 controller - Additional axis (7th axis) BSS10 belt grinding station - Max. belt dimensions 3500 x 30 mm - Max. contact wheel diameter 200 mm - Motor power 4 kW 2 x polishing stations - Polishing wheel diameter 350 - 600 mm - Power 5.5 kW Tool changer cabinet Interoll Automation GmbH belt conveyor - Total length approx. 2000 mm Ijdpfxog Saqvo Algeba - Belt width approx. 440 mm We have 4 such cells.

Condition: good (used), functionality: fully functional, mileage: 540,000 km, power: 323.62 kW (440.00 HP), first registration: 07/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x4, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space length: 6,300 mm, Year of construction: 2011, Equipment: ABS, crane, cruise control, differential lock, hydraulics, Good condition! Ibodoufch Dspfx Algea Ready to drive! 6X4 LEAF/AIR SUSPENSION Crane Hiab 211-5 with radio (year 2011) 5 extensions with rotator (15m) Euro 5

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Iodpfx Alsn Htktsgeba

Condition: as good as new (ex-display), Year of construction: 2022, Two-axis positioner for Kuka industrial robots Maximum load capacity: 500 kg Positional repeatability: 0.1 mm Overall height: 982 mm Ijdpfjlhr H Hjx Algjba Tilting range: +/- 93° Rotation range: unlimited Installation position: floor-mounted Rated welding current (100% duty cycle) = 500 A (60% duty cycle) = 600 A

Condition: used, Year of construction: 2008, Maeda mc235 Bj 2008 Hours Hook height 6.30cm Load 2000kg Petrol engine Ibjdjxc Ek Ropfx Algsa Not sold within the EU No CE

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm Ibjdpfowzyp Uex Algsa y-axis 2500 mm z-axis 1700 mm Control system - Siemens Sinumerik 840 D Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Machine weight approx. 45 t Space requirement approx. 10.9 x 9.3 x 5.7 m

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm Ibedpfet U R H Uex Algja bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 0,185 t range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm total power requirement 0,75 kW Demonstration device Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically

Condition: new, Year of construction: 2026, The ATC series of plotters has been developed for professional use in large industrial plants and factories for the production of complex large-size components. Thanks to its special design, the machine is adapted to the production of casting models and yachts, among others, significantly reducing processing times. ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics Ibedpfx Alsiq U Tqsgsa -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 3000 x 6000 [mm] AXIS RANGE AND GATE CLEARANCE: Customised parameters DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 HSK cones. Additional tool magazine positions can be provided. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.