Single girder suspension crane 9,334 mm 2 t

Konecranes hangkraan

Condition: good (used), Year of construction: 1999, Briquetting press type GP 120 Tandem Briquetting press for briquetting chips, wood chips and dust incl. automatic fill level indicator - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h * 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Switch cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic unit: approx. 300 litre tank for hydraulic oil - Weight: approx. 1,100 kg * 2 = 2,200 kg Redpfx Ajupwx Hscvsbw Used briquetting press in good condition W tong cylinder, tongs (RB 120 reinforced), tong connection flange renewed on one side (left in conveying direction) briquetting | briquette press | briquetting presses | briquette press | briquetting

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Rodpouiy Nyjfx Acvebw Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Condition: new, Year of construction: 2025, * 250 lt Net Volume * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. * Timer and working hours timer Rbedoh I N Udspfx Acvow * Special construction of control panel(EU Standarts) included

Condition: excellent (used), Year of construction: 2011, Used horizontal panel saw Rbedpfjymx S Dox Acvow Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rail (double track): 9 pieces Clamps: 7 pieces, first 3 are 2-fingered Air cushion table, width 650 mm: 4 pieces, each 2160 mm long Central blower: 1 unit with increased air output - 3 angled lift clamps (2-fingered) - 1 angled lift clamp (1-fingered) - 1st air cushion table: 800 mm wide - Speed package: -> Saw carriage feed: 1 – 150 m/min Technical specifications: Blade projection: 95 mm Saw carriage feed: forwards 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle pressure device, min. pressure width 0 mm; max. pressure width full cutting length Main saw motor: 18 kW, frequency controlled Scorer saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value with HS motor 18 kW: 28 kW Power Control CADmatic 4.0 control unit with 17" flat display Labeling with part graphics / label software / label printer PICA 104

Year of construction: 1994, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN1744271, Overheadcrane ± 12.105 mm x 5.000 kg Rbjdov Ipvxspfx Acvsw

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW Redpjxabkbsfx Acvobw not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Year of construction: 1990, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN7088302, For sale Used Demag single girder overhead crane ± 11,365 mm x 5,000 kg We can optionally supply the cranes including: * adjust in length * Assembly and inspection * conductor rails * radio control Jan Reiling B.V. also supplies new cranes completely customized at very competitive prices. * overhead cranes * hanging cranes * jib cranes * KBK installations * boat lifts All our new and used cranes that we supply (within NL and BE) are supplied including warranty! In addition, we have our own stock of approx. 15,000 Demag parts. For more information, see the website of Jan Reiling B.V. Rodpfx Ajv Ipr Hocvebw keywords: Cranes, crane, roller bridge, workshop crane, warehouse crane, hoist, crane, hall crane, bridge crane, bruckenkrane, workstation crane, lagerkrane, hebezeuge, cranes, universal crane, hoist. Overhead crane, laufkrane, overhead crane. Enke

Condition: good (used), Sturdy crane system, ideal for glass storage or workshop, Load capacity: 3t, Rbedpfx Acoryv S Aevow Length: 14250 mm, width: 8500 mm, height: 3650 mm Max. hook height: 3280 mm, Max. Overall height: 3950 mm.

Condition: used, Bandsaw Bomar 450SL. In good condition, documentation included. Can be tested in Kaunas. Specification: Model. Bomar 450 450 Bomar 450 Bomar 450 Bomar 450 Bomar 450 Bomar 450 Bomar 450. Rbedpfjqk U Rrox Acvjw

Year of construction: 1992, condition: good (used), Dimension: Length: 1400mm Rsdpfx Aceizi Hisvebw Width: 1300mm Height: 3450mm Weight: 600kg