Bookbinding machine

Kolbus

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Rjdpfx Acsx Dkk Sjvsr Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), Year of construction: 2002, Built in 2002 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm; min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar): 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.) Equipment Redpfxepgwauo Acvor copilot right hand infeed electronic counter 2 sets of knife holders 2 set of knives equipment for changing the format: 1 set of pressing plates & holders 1 set of size extensions 1 set of quick change tables 3 sets of cutting sticks Motorische Formateinstellung automatic setting from: - infeed device - book block pressure - cutting table - side knives - side gauges central lubrication standard accessories

Condition: used, Year of construction: 2004, Case maker Kolbus DA 270 Year: 2004 Description: - Digital display - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (stiff) Rsdpfx Acsyym Ubever - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Preheated glue tube - Viscosity control - Device for producing padded cases - Pressing station - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Max. mechanical speed: 65 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2011, condition: used, Card gluer Kolbus KK 841 Redpfx Aeyyb Sbscver Year: 2011 Hotmelt glue unit: Nordson Problue 4 Compatable with Kolbus gatherer: ZU 841.B

Condition: used, Year of construction: 2005, functionality: fully functional, Horizon BQ-270 (2005) 1 Clamp Perfect Binder / Binding Type: Hot-melt Book Block Size (Paper Size for Book Block): Maximum: 320 × 320 mm / Minimum: 135 × 105 mm Redpfexyua Nox Acvjr Book Thickness: 1 – 50 mm Cover Size: Maximum: 320 × 660 mm Minimum: 135 × 230 mm Suitable Cover Paper Weight: 70 – 260 gsm Maximum Cover Pile Height: 70 mm Production Speed: Up to 500 cycles per hour Power Requirements: AC 200 V, 3-phase, 50/60 Hz Heater Power: 2.2 kW Machine Dimensions: 2,300 (W) × 860 (D) × 1,250 (H) mm Machine Weight: 900 kg

Condition: used, Year of construction: 2016, Perfect binding line Kolbus KM 610 Year: 2016-2018 Consisting of Gathering machine Kolbus ZU 832.A Year: 2016 Description: - Hand feeding station - Horizontal feeder(s): 15 - ATC thickness control - Optical sheet control - Air center: Backer VariAir - Set up element - Reject gate for incomplete products: AS 842.A - Transfer into the binder Perfect binder Kolbus KM 610.A Year: 2016 Description: - Automatic setting - Co-Pilot with touch screen - Book measuring table: MT 600.A - Kolbus AFS 702.W, excl. license. (remote diagnostics) - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.B - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson smelting unit - Kolbus XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Stream cover feeder: SAL 610.A - Scoring station: 4 x - 1st nipping and pressing station - 2nd nipping and pressing station Rodpfjyybqkex Acvor - Lay down device Transport system - Escape delivery Conveyor tower Front cutter Kolbus FA 650 Year: 2018 Description: - TFT Touch screen - Throughfeed Three knife trimmer Kolbus HD 143.P Year: 2016 Description: - Co-Pilot with touchscreen - Right hand infeed - Cut counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 18 Book stacker Kolbus KL 501 Year: 2016 Description: - Co-Pilot with touchscreen - Delivery to the right - Straight delivery Palletiser Kolbus PL 771.E Year: 2018 Description: - Automatic setting - Blocking station: SR 501 stack-aliner - Turning device - Pallet dispenser - Slip sheet feeder - Pallet delivery station

Year of construction: 2017, condition: used, Case maker KOLBUS DA 290 Year 2017 For fully automatic production of display cards, calendar backs, game boards or luxury packaging. Configuration: - Copilot system with touchscreen - Cloth feeder for interval charging with pile magazine, max. stacking height 250 mm - Miss cloth control during the separation process - Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - Cloth cylinder with grippers and exchangeable plate for rubber pad - Automated glue application adjustment - Viscosity control device with control for automatic water supply to ensure constant glue viscosity with pump and water tank for manual filling - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for inside lining with hot-glue - Automatic case counter - Stream delivery - Roller conveyor incl. table - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D - Active Line Module for energetic recovery of operating power in the line network - Board feeder multi-piece incl. board magazine Options: included - Board prestacking conveyor of one-piece board for interchangeable use - Device for large format (width) - Device for processing cold glue with inside lining - Template for preparing rubber pads (device for fitting the rubber pad on its plate outside the machine) - Remote Service Gateway (coupling with RSG 702.A) Technical specifications: - Mechanical speed: up to 40 cycles/min - Product thickness: 1 - 4 mm (all boards in the same thickness) - Boards width: 300 - 1.050 mm Rodpfxsyya Nrj Acvjr - Boards height: 210 - 735 mm - Board 1 + 5 width: 30 mm - Board 2 + 4 width: 100 mm - Board 3 width: 50 mm - Cloth width: 295 - 1.080 mm - Cloth height: 205 - 765 mm - Joint width: 4 - 10 mm - Turn-in width closed: 10 - 20 mm

Year of construction: 2006, condition: good (used), machine/vehicle number: 1452, Control panel with display Rsdpfx Acek Izqtjvsr

Condition: used, Year of construction: 2024, Cloth cutter Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives Rsdpfx Aevqbhlscvsr - deposit delivery Material width: Max 1.600 mm Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Maximum length of cut: max. 1.100 mm (for length and cross cutting) Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: used, Year of construction: 2005, Perfect binding line Kolbus KM 473 Year: 2005 Gathering machine Kolbus ZU 841.A Description: - Hand feeding station - Number of gathering stations: 12 - ATC thickness control - Set up element - Pile delivery with delivery conveyor: ZA 841 - Intermediate element - Transfer into the binder Redjyhdd Uepfx Acvjr - Pump(s): Becker Aircenter Perfect binder Kolbus KM 473 Year: 2005 Description: - Co-Pilot with touch screen - Number of clamps: 27 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 370 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Gauzing station - Pile cover feeder: RA 48.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Note: Solema book block feeder shown on the photos is not included in the price!

Year of construction: 1996, condition: ready for operation (used), Built in 1996 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Equipment gathering chain & feeder • 5 station gathering track & chain • 4 feeders 370 • 1 cover folder feeder 1528 stitching unit • stitching unit 390 • wire unwind device • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 Redsd Eg Tuepfx Acvor knives • 2 sets of knives

Condition: good (used), Kolbus ECK 100 Automatic Corner Cutter Made in Germany, Kolbus GmbH & Co. KG. Very good condition. This is a professional, production-grade device for trimming corners for hardcover binding. Year of manufacture: 2009. Sturdy construction ensures precise operation. Interchangeable blades. Adjustable margins. One set of blades included. Compressed air powered. Rodpfx Acoywdpdever

Condition: used, Year of construction: 2007, Format: 1360 x 1200 mm Equipment: Automatic palletizing PC control with batch view Layer formation Pallet dimensions: 1360 x 1200 - 1000 x 800 Speed: 30 stacks/min. Rjdpfxsyxqvgs Acvor

Condition: used, Year of construction: 1997, functionality: unexamined, Polar Mohr RA-4 Year of manufacture: 1997 Rodpewth Rwefx Acvjr After the jogging process is completed, the air is pressed out of the cutting ream. You can perform single or double pressing, with the pressing pressure for the first cycle being adjustable; on an inclined table, intermediate pressing is also possible. Table size: 900x1150 mm Minimum ream height: 30 mm Manual ream height: 80 mm Compressed air requirement at 6–8 bar: approx. 2 L/min

Condition: used, Year of construction: 2004, Feeder(s) for gathering machines Kolbus ZU 840 Year: 2004 Description: - Number of feeders: 16 - ATC thickness control - Excluding pump(s) -Set up element -Intermediate element Feeders can also be sold individually. To be used for feeders or inline with a Sigloch or Müller Martini book line. Redpfx Aswut D Eecvsr Description modified on 19-3-2026