Roller leveller

KENNY TCL 150 A

Condition: ready for operation (used), Year of construction: 2008, turning height: 1,200 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,800 mm, table load: 8,000 kg, overall weight: 25,000 kg, Fanuc 18iT-B, C-axis Turning, milling, and drilling capabilities 16-position tool changer Chuck: 1600 mm diameter, maximum turning diameter: 1800 mm, center height: 1200 mm Maximum chuck rotation speed: 250 rpm Maximum allowable chuck load: 8000 kg Fpedpszh Uz Aofx Ahmek Chip conveyor

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm Fjdpfx Ajw Rf S Eohmjpk tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition Fsdpfx Aecxxx Rjhmspk

Condition: good (used), GENERAL CHARACTERISTICS Max. Ø to be ground 120 mm Grinding wheel width 250 mm Minimum Ø to be ground 1 mm Ø drive grinding wheel 304 mm Ø working wheel 508 mm DIMENSIONS AND WEIGHT Height 1,700 mm Width 1,500 mm Length 2,750 mm Weight 4,000kg ELECTRICAL CHARACTERISTICS Grinding head motor power 15 Kw Fsdpfx Aerpnf Ashmjpk Spindle head motor power 1,8kw Hydraulic motor power 1,1kw Total power 20 kW Voltage 220/380 V

Year of construction: 1987, condition: used, sheet width 150 mm coil weight 80 kg coil external diameter 650 mm 1000 mm diameter of the mandrel 230 - 445 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Fjdpfsfn Aqlsx Ahmjpk

Condition: used, Technical Data Faceplate diameter: 1580 mm Max. turning diameter: 1700 mm Max. turning height (cross rail support): 1250 mm Max. turning height (side support): 1160 mm Fpjdpfx Ajwyn Ntehmok Max. faceplate load: 12,000 kg Max. distance from faceplate to underside of cross rail: 1210 mm Max. distance from faceplate to underside of side toolholder: 980 mm Max. distance from faceplate to underside of turret head: 1420 mm 18 spindle speeds: 2.8 – 140 rpm 18 feed rates: 0.063 – 3.15 mm/rev Total power requirement: 55 kW Required floor space approx.: 5300 x 3500 x 4100 mm Control: conventional

Condition: used, Year of construction: 2007, workpiece diameter nominal 2400 mm max. workpiece diameter 2800 mm max. module 30 mm control Siemens Sinumerik 840 D dividing plate diameter 2200 mm Fpodpfx Ahjw Rf S Ssmsk table diameter 2500 mm Table hole Diameter / depth 800 / 875 mm max. table load 40000 kg Table rpm 4,5 min-1 clamping length max. 375 mm clamping diameter max. 350 mm cutter diameter max. 2800 mm Cutter arbor cone HSK-B160 swivelling range milling head + 30/-45° Distance Cutter - Workpiece 615 / 1600 mm weight of the machine ca. 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical Documentation

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm Fpedpfxjvwgl Nj Ahmjk total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, CNC Travelling Column Milling Machine – Fully Retrofitted by REM (2021) Powerful and versatile heavy-duty milling machine, completely modernized by REM specialists in 2021 with state-of-the-art Heidenhain TNC 320 control. Ready for immediate production use. KEY SPECIFICATIONS: • X-axis (transversal travel): 6,000 mm • Y-axis (vertical head travel): 2,000 mm • Z-axis (axial slide travel): 950 mm • Dual-spindle head | Head rotation: 360° • Spindle speed: 1,000 – 4,000 rpm • Spindle taper: ISO 50 (automatic locking/unlocking) • Head dimensions: 290 × 290 mm • Spindle motor power: 15 kW (DC) • Machine weight: approx. 32 tonnes • CNC Control: Heidenhain TNC 320 Fedpfxon D N H Te Ahmepk WHY BUY FROM REM? ✔ Machine fully inspected and tested in working conditions ✔ Modern CNC retrofit – new electrics, new drives ✔ Documentation and technical support available ✔ Export worldwide | Competitive shipping Ideal for heavy component machining in aerospace, energy, and heavy industry. Contact us today for full technical specifications, photos, and video demonstration.

Year of construction: 1993, condition: ready for operation (used), machine/vehicle number: Seriennummer: 9302394, CNC-Control HATASTAR 2000 The press capacity is 500 t or 5000 kN In addition to the machine tools are available Switch Cabinet left X1- + R-/ X2- + R-Axe on round guide Y1- + Y2-Axe hydraulic Upper tool clamping pneumatic sheet metal trace-device Fjdpfsd Egc Aox Ahmopk Second tow-hands Operation universal matrice 100x100x5'100 mm knife 280 x 5'100 mm Matrices-central plate, b = 111 mm