High speed press

KAISER V 315 WR 2740

Year of construction: 2008, condition: used, pressure 315 t stroke 40-200 mm no. of strokes 20-100 Hub/min ram - range of adjustment 120 mm ram surface 2000x1100 mm table surface area 2000x1200 mm hole in the table 1700x250 mm 500 mm column travel -side 820x650 mm total power requirement 45 kW weight of the machine ca. 44 t Ksdpfx Aaordi Dls Eefa

Year of construction: 1994, condition: good (used), Manufacturer: Boge Tip: V LEX 45 Engine: 45 kW Capacity: 6.5 m3 / min Kfodpehtq Dvefx Aa Esa

Condition: good (used), Year of construction: 2007, CNC Turning and Milling Center Machine type: Mori Seiki NZ-S 1500 / 1000 Control: Fanuc MSC-701 Year of manufacture: 2007 TECHNICAL DATA: Max. turning length: 1,055 mm Turning diameter: 120 mm Max. swing over bed: 285 mm Rapid traverse (X/Z): 20 m/min Kedewxahfjpfx Aa Ejfa Main spindle Max. speed: 3,500 rpm Drive power: 7.5 / 5.5 kW Bar capacity: 43 mm Spindle nose: A2-6 Number of turrets: 2 Tool stations: 6 + 6 Tool interface: Capto Tailstock Quill diameter: 85 mm Quill taper: MK 4 Quill stroke: 70 mm Tailstock traverse: 520 mm Steady rest: hydraulic Steady rest: SMW SLU-1-Z Equipment features: Chip conveyor Coolant pump Tool measurement system

Year of construction: 2008, condition: refurbished (used), Oscillating base: 800mm Oscillating cross slide: 800mm Maximum distance between large spindle noses: 1,130mm Maximum machining diameter: 320mm Maximum turning length: 810mm Bar machining capacity: 52mm Kjdpfx Aasxuguus Esfa X1, X2 axis: 210mm Y1 axis: 110mm (+65, -45) Y2 axis: 110mm (+45, -65) Z1, Z2 Axis: 810mm B-axis (spindle 2): 920mm CNC control: MSX-701 III Spindle 1, 2 Max. spindle speed 1, 2: 6,000 1/min Spindle nose 1, 2: JIS A2-5 Bore diameter through spindle 1, 2: 61mm Turret type: 16 stations x 2 Max. tool spindle speed motorised: 6,000 1/min Speed x1, x2: 30,000 Speed y1: 20,000 Speed z1, z2: 50,000

Condition: used, Year of construction: 1997, Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Kfjdpfx Aaouqd Tms Eja Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton Standard configuration The press was converted to CE standard in press was converted to a SIEMENS S7 control conveyor system still has a SIEMENS S5 control system. Extended machine accessories Die lifters in the table Automation Feeding unit KEMMERICH consisting ofDecoiler levelling machine roll feeder Coil loading car

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 24.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30.000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2325 [mm] - Machine weight : 2200 [kg] EQUIPMENT - CNC : Fanuc 31i-Model B5 - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : LEHMANN * model : Serie 500 Kfedpfexx Dacox Aa Eja - Coolant tank * with high-pressure pump : 70 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : HEXAGON - Workpiece probe : HEXAGON - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer - Chuck 3 jaws : SCHUNK

Condition: used, Year of construction: 1993, pressure 63 t stroke 10 - 80 mm no. of strokes 75 - 400 /min distance between columns 1080 / 920 mm dayligth (stroke and adjustment up) 450 mm column travel -side 300 mm table surface area 1000 x 550 mm hole in the table 700 x 160 mm table height over floor 1080 mm ram surface 900 x 450 mm Kedpevut Ixsfx Aa Ejfa ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1,0 – 9999,9 mm power requirement 11,0 kW Weight 9,5 t dimensions of the machine ca. 2,8 x 2,7 x 3,1 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (make Ortlinghaus), manual stroke adjustment, motoric ram adjustment, motoric circular oil lubrication, pneumatic counterbalance in ram electronic servo-roll feed Kaiser KWV 250

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, ram adjustment: 150 mm, table length: 2,000 mm, table width: 1,200 mm, pressing force: 250 t, stroke adjustment: 40,200 mm, overall weight: 55,000 kg, DGUV certified until: 09/2026, Raster punching and forming press RSU 2500 - 2000 P Desch compact drive unit Electronic press force measurement system Hydraulic overload protection system 3-piece tie rod cast construction Tool holder Table and ram clamps Raster VWA hydraulic roller feed, band width 500 mm, with Topochrom roller coating Ram area 1000 x 2000 mm Strokes: 20 - 150 1/min Kedpfx Aajxcbbre Esfa Stroke adjustment: 40 - 200 mm Optional with Kohler strip feeding system 20030.400/9-2000.2H Optional with Kaschwig soundproof cabin

Condition: used, Year of construction: 1994, pressure 250 t distance between columns 1650 / 1400 mm stroke fix 150 mm no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm Ksdpfevuucwex Aa Esfa column travel -side 550 mm table surface area 1600 x 900 mm hole in the table 1000 x 300 mm table height over floor 980 mm ram surface 1400 x 900 mm power requirement 42,0 kW weight of the machine ca. 33,00 t required space 2,8 x 2,5 x 4,4 m permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: new, Year of construction: 2025, pressure 315 t distance between columns 3800 mm stroke fix 35 mm no. of strokes 100 - 250 Hub/min Kjdpfx Aasxcp Imo Ejfa dayligth (stroke and adjustment up) 560 mm column travel -side 600 mm table surface area 3700 x 1200 mm hole in the table 3400 x 450 mm ram surface 3700 x 800 mm Weight 110,0 t dimensions of the machine (WxDxH) 6,1 x 2,65 x 5,6 m