Manual stacker

Jungheinrich EJC16

Condition: used, machine/vehicle number: 10799, Year of construction: 2005, operating hours: 10,010 h, load capacity: 1,600 kg, lifting height: 5,200 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, battery voltage: 24 V, overall weight: 1,300 kg, 4880841 Nsdjw R Aczspfx Ac Aswl Serial Number: 90139199 Battery Details: 24 Volt

Condition: like new (used), Year of construction: 2015, Workpiece Ø max. 400 mm Workpiece length max. 300 mm Chuck Ø max. 500 mm Swing Ø 520 mm Travel X-axis: 1,110 mm Nodpoxy Ac Sjfx Ac Ajwl Travel Z-axis: 595 mm Main spindle: Power 40 / 100 % duty cycle: 47/34 kW Main spindle: Torque 40 / 100 % duty cycle: 600 Nm Main spindle: Max. speed: 2,850 rpm Control: Fanuc 31i No Y-axis

Condition: excellent (used), Year of construction: 1997, operating hours: 13,755 h, Electric pallet truck. - The cart is in working order. - Manufacturer: JUNGHEINRICH, type: EJC 16. Nsdpfoudlf Nsx Ac Aowl - Read operating hours (h): 13751, - Serial number: 805 491 81 - Loader. - After inspection in 2023.

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Nodpfxehpqque Ac Aowl Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Weight: 4,8to

Condition: ready for operation (used), Year of construction: 1983, Offset printing machine ULTRAMAN VII AGS/1983 Maximum sheet size 1120x1600 mm Minimum sheet size 600x800 mm Printing on 5 color groups + 1 dispersion varnish group IR drying alcohol dampening and cooling Quick action plate clamps Nwsdpfsy U Ufdjx Ac Ael The machine is in good working condition.

Condition: new, functionality: fully functional, power: 14.6 kW (19.85 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 1 l, color: yellow, operation weight: 3,000 kg, maximum load weight: 3,000 kg, lifting height: 4,010 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, first registration: 01/2026, emission class: euro5, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: 1, Equipment: additional headlights, air conditioning, cabin, Excavators GT3000 The GT3000 excavator is a modern crawler machine designed for earthmoving operations that require an extensive working range, high breakout force, and a stable construction. Thanks to its compact dimensions and robust undercarriage, the machine is ideal for foundation work, installation jobs, municipal projects, and tasks in areas with limited maneuvering space. Engine The machine is equipped with a reliable Yanmar 3TNV80F engine delivering a rated power of 14.6 kW. This engine ensures stable and fuel-efficient performance. Working Range The excavator is fitted with a bucket offering a capacity of 0.09 m³ and a width of 460 mm. The bucket breakout force of 17.6 kN enables efficient digging, even in tougher soil conditions. A maximum digging depth of 2810 mm and a maximum reach of 4375 mm provide a large operational area, reducing the need for frequent repositioning. A maximum digging height of 4510 mm and a dumping height of 2760 mm allow easy loading of material onto transport vehicles. Dimensions and Stability The overall dimensions of the machine are 4010 mm in length, 1540 mm in width, and 2360 mm in height up to the top of the cab (1380 mm to the top of the boom). The track contact length with the ground of 1530 mm and a track gauge of 1510 mm ensure stability during operation. The 250 mm wide track shoes and low ground pressure of 26.7 kPa allow safe operation on less compacted surfaces. Mobility and Maneuverability A rear swing radius of 710 mm allows comfortable operation in confined spaces. The swing frame width of 1350 mm and a counterweight clearance of 485 mm, as well as a minimum ground clearance of 255 mm, enable smooth movement over uneven terrain. The sturdy undercarriage with a track length of 1895 mm guarantees good traction and safe operation. Technical specifications Operating weight: 3000 kg Engine: Yanmar 3TNV80F Number of cylinders: 3 Rated power: 14.6 kW Bucket capacity: 0.09 m³ Nwsdpeymtfxofx Ac Ael Bucket width: 460 mm Bucket breakout force: 17.6 kN Swing arm: Present Joystick: Present Swing speed: 13 rpm Max. digging height: 4510 mm Max. dumping height: 2760 mm Max. digging depth: 2810 mm Max. reach: 4375 mm Rear swing radius: 710 mm Track contact length with ground: 1530 mm Total track length: 1895 mm Track gauge: 1510 mm Track shoe width: 250 mm Swing frame width: 1350 mm Ground pressure: 26.7 kPa Total length: 4010 mm Total width: 1540 mm Total height (to top of boom): 1380 mm Total height (to top of cab): 2360 mm Counterweight clearance: 485 mm Minimum ground clearance: 255 mm

Condition: used, Cutting length: 3100 mm Steel cutting capacity: 12 mm Backgauge: 1000 mm Nodpjxuh Ipefx Ac Ajwl

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Nwedpfx Aeu Awaloc Asl Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Condition: used, Year of construction: 2017, Overview The winder was manufactured in 2017 by the Spanish manufacturer movitec. It is in operation until the end of September 2023 and can be visited at any time.  Technical data  Max. 120 pallets/ h (with 10 wraps) Dimensions (LxWxH): 5240mm x 3825mm x 4184mm Weight: 2.000kg  Foil width: 500mm  Main frame made of steel  Rotating ring with unwinding device for prestretch film Motorized prestretch system Cutting and welding system Scope of delivery  Protective fence  Winder | Movitec | Saturn S6 | 2017 Compressor | Josval | EDS-900 | 2016 Nsdpfjl Uyfksx Ac Ajwl

Condition: like new (used), Year of construction: 2026, functionality: fully functional, We offer you: CNC turning and milling center with robotic automation Manufacturer: DMG MORI Type: CLX 450 TC Year of construction: 2026 Control system: Celos X with Siemens Sinumerik One Technical data: Max. turning diameter: 400 mm Turning length: 1100 mm Bar capacity: max. 65 mm Travel paths: X-axis travel: 276 mm Z1-axis travel: 755 mm Z3-axis travel: 775 mm Y-axis travel: +/- 100 mm B-axis travel: +/- 120° Main spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Counter spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Milling spindle: Speed: 0 – 12,000 rpm Drive power: 8.8/10.5 kW Tool interface: HSK-T 63 Tool changer: 60 positions Max. torque: 73/90 Nm Internal clamping device: Ø 67 mm Operating hours: approx. 1,130 h Spindle hours: approx. 280 h Technical features & accessories: - Absolute, direct linear scales in the X and Y axes - Double-circuit filter - Counter spindle ISM 65, A2-8, C-axis and hydraulic spindle brake - Hinged belt chip conveyor, incl. coolant tank - Chuck flushing device on the outside for the main and counter spindle - Coolant supply through the counter spindle - Coolant spray gun - Screen cleaning for the safety shield - Electronic handwheel (if available) - Alternating speed - Signal light, 4-color - Automatic work area door, electric - Electrical interface Robo2Go - Workpiece measuring probe, manufacturer Renishaw RMP40 (if available) - Tool measuring device, manufacturer Renishaw RP1 (if available) - Function for drill breakage detection for Renishaw RP1 - Linear scale for Z1-axis - Differential pressure monitoring 2.0 on the main and counter spindle - Tailstock function for the counter spindle, incl. foot switch - Coolant system 8/40 bar, consisting of: - Coolant tank 600 l - Pump pressure variable 8 – 40 bar Njdoz A Ay Tjpfx Ac Aswl - Belt filter system - Lifting pump with level monitoring - Mechanical oil mist separator - Protection Package - Technology cycle with dialogue-guided programming - Technology cycle for parting off the workpiece - 2x 3-jaw chuck, manufacturer Schunk ROTA THW3 265-81 - Loading and unloading system Robo2Go, consisting of: - Module 35 kg - Drawer storage incl. additional drawer - Accessories on request Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and specifications, as well as prior sale, are reserved!