Stainless Steel Tank

JORNS

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Hydraulic Bending Machine Jorns CH-4932 – 8 meters Type: MAXI-MULTI-LINE-200-SM-CNC400A-8 Year of Manufacture: 2000 Technical Specifications: Gtjdpswt Eikefx Afnju - Working length: 8 meters - Installed power: 11 kW

Year of construction: 1997, condition: refurbished (used), 2 pieces volute casing pump in process design 1 piece completely overhauled, new ball bearings for pump and motor. Mechanical seal overhauled by specialist company. All seals new. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 1/min Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277mm Bearing type: roller bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type drive end oil Lubricant monitoring Oil level controller Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Nominal size of suction nozzle: DN 80 Discharge connection Nominal diameter: DN 40 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: gray cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Gsdpfxsiuznus Afnjtu Weight: 300 kg The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: used, tank capacity: 13,000 l, GENERAL Equipment: spray head, crane lugs Design: vertical Notes: manway approx. 325 x 440 mm; minor dents in the cylinder Speed: 1390 rpm Internal diameter: 2,090 mm Total height: 4,500 mm Power: 1.1 kW Location: Bremen Nameplate: Volume: 13,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,760 mm Last application: animal feed TANK Max. permissible operating temperature: 50 °C Support type: height-adjustable feet Number of feet: 3 pcs EQUIPMENT Manway / access port: on the cylinder Outlet: DN65 DIN 11851 MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR Agitator manufacturer: PRG Gjdpfx Afsyclrvsnotu Voltage: 220/380 volts Agitator arrangement: mounted laterally on cylinder Agitator equipment: agitator shaft and propeller no longer available

Condition: used, tank capacity: 150,000 l, GENERAL Equipment: Venting/intake, crane lugs Construction type: upright Remarks: Minor dent in cylinder Outside diameter: 4,000 mm Total height: 11,600 mm Top head: conical bottom Location: external storage Nameplate: Volume: 150,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: food VESSEL Lower head: flat bottom with slope Support design: flat bottom with slope EQUIPMENT Manhole / cover: in cylinder Outlet: present Gedsyci Alspfx Afnetu

Condition: good (used), LOMA integrated systems combine metal detection and checkweighing functions. They provide the perfect solution for food product inspection. The combo system creates a robust critical control point where ease of installation and operation is accompanied by simplified processes and improved production quality. Gtedpstr Dugjfx Afneu Loma AS checkweigher: Range 20-1500 grams Platform lenth 300mm Belt Speed to 20 meters per min. Compressed air reject Loma IQ2 metal detector: Belt width: 150mm Gate dimensions: 150 x H 110mm Sensitivity: up to 1.0mm Ferrous, 1.0mm Non-Ferrous, and 1.5mm Stainless Steel. Total dimensions: L: 2200 x W: 1000 x H: 1150mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: K10027, control type: CNC control, degree of automation: semi-automatic, throat depth: 1,000 mm, bending angle (max.): 140 °, Equipment: CE marking, emergency stop, foot remote control, Jorns Long Folding Machine for folding Sheet Metal I have operated this machine from new. It is a very capable and reliable machine made by Jorns of Switzerland who are known to be at the very top of their game. It is capable of folding 1.2mm in steel and 2mm in aluminium. The machine has a 1m insertion depth and four backstops which are adjustable. (there is an option to add more, but we never needed to.) The machine also has a slitter installed for slitting sheets along the full length of the machine to desired width. This is all controlled from the CNC. The machine was manufactured in 2010. It has the Jorns CNC50 control system which can be programmed with 100 different programs. The machine is very easy on power as all folding movements are hydraulicly driven. Overall the machine is in extremely good condition and can be seen operating until Mid January. Machine comes with safety light curtains. Machine will be ready for collection middle/end of January. Gedpfx Afjx Ilx Isnetu I would prefer buyer to collect but if delivery is necessary, it could be arranged as an extra charge. Machine is approx 8m long x 2m wide and weighs approx 7 Tonne. New Jorns machine forces sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: 05053-00/K22170, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, working width: 6,400 mm, Working length: 6400 mm Working thickness: 1.5 mm (400 N/mm²) Without shear Back gauges Gtsdpfx Afexm Sbdjnou Taper stop New controller (2022)

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Godpfsgwt S Tox Afnetu Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, working width: 6,100 mm, total length: 6,750 mm, total width: 1,550 mm, total height: 1,820 mm, input voltage: 400 V, - Hub cylinder seals have been gradually replaced over the last 6 years - Oil change carried out 2 years ago - Machine was inspected by a specialist Godsxv Akbjpfx Afnstu - Two adjustable angle presets - Electric cutting device - Cable for the cutting device was renewed 3 years ago

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, total length: 10,000 mm, CNC 5000 control with 17-inch color TFT touchscreen. - Automatic rotary cutting - Double hydraulic clamping set for sheet metal clamping (short and long) Upper beam with water bending groove, oil filler, clamping and leveling material, emergency stop rail along the entire length of the machine, emergency stop actuation integrated into the pedal for the upper beam and bending beam, a second pedal for two-person operation, a safety device for the upper beam, two clamping fingers for short pieces Gtodswnyu Depfx Afnsu The machine is repaired, inspected, and cleaned by a specialist and is fully operational. A functional test will be performed. Sheet metal width: 10,000 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.5 mm VA sheet thickness: 1.5 mm Back width: 150 - 1150 mm Color: Light blue/light gray Total power requirement: 400 V Space requirement: 12,500 x (2,367 x 700) + 2070 mm fence Insertion depth: 1150 mm Machine weight: 18,500 kg Positioning speed: 250 mm/sec Number of uprights: 8 Number of clamping jaws: 8 Bending angle: 145 degrees

Year of construction: 2024, condition: new, The LITech jaw crushers are ideal for pre-crushing extremely hard, medium-hard, hard-tough and brittle materials such as rubble, bentonite, soil, precious metals, ores, ferroalloys, glass, kaolin, catalysts, ceramics, clinker, coal, coke, minerals, non-ferrous materials -Metal, Slag and many, many more!! Gjdpfx Afjga Nfcjnstu

Condition: used, functionality: limited functionality, Year of construction: 1985, degree of automation: semi-automatic, actuation type: electric, working width: 6,000 mm, number of axes: 5, sheet thickness (max.): 1 mm, sheet thickness aluminum (max.): 1 mm, total width: 7,000 mm, total height: 1,600 mm, input voltage: 400 V, Being sold due to upgrade to a new machine! Bending machine / Press brake by Jorns Bending length: 6 m Used, no returns and no warranty. Net price: €16,500.00 Gtodpfxowxahre Afnsu Subject to errors and omissions.