Labeling machine

IC Filling Systems

Condition: used, Year of construction: 2020, Monoblock for rinsing, filling and capping glass bottles. 1. Rinser: Rinsing tower with 6 grippers for single-stage rinsing of empty bottles. 2. Filler: Filling tower with 6 electro-pneumatic backpressure valves. 3. Capping machine: Stainless steel cap container with cap conveyor and capping head 4. Bottle exterior washer Additional title: Counterpressure filler with 6 filling valves, sealer with one sealing head Capacity: 1100 bo/h referring to 0,33 l bottles Filling temperature: 2 °C Length: 2,20 m Width: 1,90 m Height: 2,10 m Formats: Euro 0.5 l and 0.33 l; 26 mm crown caps Dkjdpfx Afew Tbgdenoh Running direction: clockwise Operation / Control: Schneider Electric Base construction: Monobloc; Stainless steel housing on feet with plexiglass doors Features: Rinser with 6 grippers, filler with 6 filling valves, capper with one capping head, bottle exterior washer, beer pump, free bottle transport

Year of construction: 2018, condition: used, 2-unit brewing system mounted on a stainless steel frame as a brewing block. This consists of the following components: - Stainless steel mash/lauter tun for mashing, mashing and draining the mash. Separate control of the thermo-oil-heated frame and bottom heating. The double-walled container is encased in insulating cladding and has a polished inner surface. The motor mounted on the top drives the chopper and agitator with infinitely variable speed control. A multi-part perforated false bottom is provided for lautering and a rectangular manhole on the side for sparging. In addition, the vessel is equipped with a hinged lid, CIP spray head, temperature probe and spray unit. - Stainless steel wort pan/whirlpool. The container is double-walled and has welded heating zones in the frame and bottom, which are heated with thermal oil. The vessel is also insulated and equipped with a temperature probe, hinged lid, CIP cleaning head, spray unit, height-adjustable lock and tangential wort inlet for knocking out. Polished inner surface. - Single-stage plate heat exchanger for cooling wort from 100 °C to 18 °C while simultaneously heating water from 13 °C to 77 °C. The wort from a brew can be cooled within approximately one hour. The plates are made of 1.4401 (AISI 316) stainless steel and the seals are made of EPDM. The wort cooler has a PT1000 temperature sensor. - Thermal oil heating for heating the laser-welded heating zones of the brewing vessels. In the thermal oil tank, approx. 50-65 l oil is heated electrically to a maximum of 150°C. A safety switch ensures that the heating is automatically stopped if the temperature exceeds 160°C. The vessel is equipped with a temperature and level probe. A pump circulates the thermal oil. - 12 hl hot water tank, standing separately on three feet, with a manhole on the top. The tank is heatable, insulated and equipped with a hose level indicator, temperature probe and hot water pump. - Centrifugal pump for product transfer between the tanks and for CIP cleaning with a motor power of 0.37 kW and infinitely variable speed control. - Stainless steel pipes and manual valves for diverting the product flows. The pipes are orbitally welded and have polished inner surfaces. - Control unit with 10" touchscreen and PLC for automation of the brewhouse, housed in a stainless steel control cabinet. The following processes can be controlled and monitored from here: 1. Switching the stirring and chopping unit on/off and speed control. 2. Temperature control of the mash/lauter tun 3. Temperature control for the pan/whirlpool (separate for bottom and frame) 4. Switching the product and CIP pumps on/off and speed control. 5. Display of inlet water temperature 6. Display of wort temperature at the outlet 7. Temperature control of the thermal oil tank 8. Setting of timers 9. Setting of the mashing programme (multi-stage mashing with up to 5 stages; setting of times, temperatures, rotation speeds of the stirrer and the pump) 10. Temperature of the hot water tank. Dkedpow Tbmdofx Afnsh Additional title: compact brewing block with warm water tank Cast wort capacity: 5 hl Power: 38 kW Length: 2877 mm Width: 1476 mm Height: 1952 mm Operation / Control: control cabinet with PLC and touch screen Material: stainless steel 1.4301 (AISI 304) Base construction: Brewing block on stainless steel frame, separate hot water tank Features: Mashing/lautering tun; wort kettle/whirlpool; plate heat exchanger; oil heating; centrifugal pump; pipes and valves; hot ...

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15.10, total height: 2,500 mm, total width: 1,400 mm, total length: 2,400 mm, type of input current: three-phase, control voltage: 415 V, input frequency: 50 Hz, ic systems automatic bottle filling machine with conveyor. Model 5.5.1 Automatic Isobaric Microblock. Used for rinsing, filling and capping bottles. Suitable for beer, wine and soft drinks. Processes 500 bottles per hour. Fits crown caps of 26 - 29mm. Unit has 5 rinsing nozzles, and 5 filling turrets. NO VAT Dkjdpfewg Sduex Afnsh

Condition: used, Year of construction: 2016, Bottling line Alfatek | Beer Year: 2016 Speed: 1,000 bph Direction: American Labeller Enos Nr.2 adhesive stations Filling Monoblock Alfatek 7.1 Elvira Filler 7 valves Capper single head crown cap 26mm and 29mm Dksdpfx Afjwdiq Tonoh Safety protections

Condition: like new (used), Year of construction: 2021, operating hours: 620 h, functionality: fully functional, Kaeser Aircenter SM13-11 screw compressor (2021) Manufacturer: Kaeser Dkodpfx Aexnnd Rofnoh Type: Aircenter SM13-11 Year of manufacture: 2021 Condition: Very good, used Switch-on hours: 1356h Load hours: 606h Maintenance in 2825h Technical data Pressure 11 bar Effective delivery quantity 1.08 m³/min Nominal power drive motor 7.5 kW Protection class drive motor IP 54 Electrical supply 400 V / 3 Ph / 50 Hz Dimensions (WxDxH) 630x1200x1716 mm Weight 400 kg Compressed air tank 270 l Compressed air connection G 3/4 Sound pressure level 64 dB(A) Refrigeration dryer Power consumption 0.26 kW Pressure dew point 3 °C Pressure loss 0.2 bar Refrigerant R 134a Energy saving control Yes Electronic condensate drain Eco-Drain Electrical equipment EN 60204-1 Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m supply cable with 32A plug

Condition: good (used), Item: A-7577 Cream tank 10.000 L Stainless steel Process Cream tank, double jacketed, insulated scrape agitator from top, CIP mounted at top. 3 adjustable legs, manhole at top. capacity 10.000 L. Dodpfx Afsh E Dp Aenskh We can offer 2 pieces from stock.r diameter 2458 mm

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details Output 800 bph (at 0.33l) 750 bph (at 0.5l) 600 bph (with 1.0l) 400 bph (for 2.0l) 240 bph (with 5.0l party KEG) Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) Long tube filler with 6 filling points Fully automated filling process Single or double CO2 flushing Siemens S7 control system with touch panel Operating hours: 725 hours Dkjdpfxou I Hr Uj Afnjh

Condition: good (used), Stainless steel tank 5000 L with mixer, cooling. In good condition They have a built-in pipe around the tank that can cool Dedovr E N Nspfx Afnekh

Condition: good (used), power: 30 kW (40.79 HP), Year of construction: 2010, operating hours: 51,548 h, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, pressure (max.): 8 bar, rotational speed (max.): 2,945 rpm, machine/vehicle number: 100609.1, Equipment: type plate available, The Kaeser ASD 57 is an energy-efficient screw compressor designed for reliable compressed air supply in industrial applications and is characterized by its compact design and quiet operation. With advanced Sigma profile technology and intelligent control, it offers optimum performance and durability. Technical details: Item number: 100609.1 Dksdpfx Afst Iwyueneh Serial number 1941 Year of manufacture: 2010 Nominal output: approx. 30 kW Maximum operating pressure: 8 bar Engine speed: 2,945 1/min Condition: used (see pictures and type plate)

Condition: used, Semi-automatic PET bottle blow molding machine Manufacturer: FERENC Model: F-1400 Year of manufacture: 2006 Output: approx. 800 pcs/h Number of molds in the machine: 2 x 5 L (48 mm cap) Oven dimensions: - Length: 900 mm - Width: 900 mm - Height: 1200 mm Blow molder dimensions: Djdpeugu E Rofx Afnokh - Length: 1800 mm - Width: 750 mm - Height: 2000 mm Set weight: 1200 kg Technical condition: used machine