Parts washer, cleaning system,

IBS Waschautomat Typ JUMBO 115-2 Typ JUMBO 115-2

Condition: excellent (used), functionality: fully functional, Centauro CO700 Band Saw Saw wheel diameters 700mm Max. cutting height 460mm Max. cutting width 680mm Max. band width 40×0.6mm Motor power 3kw Wheel rpm 736r.p.m CE certificate Csdjvyp I Sjpfx Aqveri Year of production 1997

Condition: new, Year of construction: 2025, Units available in stock! Specifications: Throughput:Up to 5m3/h, ~700kg/h* Hopper: 0,57m3 Main motor: 22.5kW Cedpfxetmup Uo Aqvjri Hidraulics: 1.1kW Blades:38 units Blade size: 35x35mm Length: 2100mm Width: 1500mm Height: 1600mm Weight: 1700kg Screen: D8~D40 Output hole: D200 Warranty: 2 years / 1000 workhours Single rotor shredders are some of the most universal chipping platforms out there. Best known for shredding various types of wood (Briquettes, hardwood, softwood, lumber), the platform can easily be adapted to numerous other substances such as rubbers, plastics, paper, light metals and general waste (Even including medical!). Your needs are our commands. When implemented by woodworking companies into their current lineup this machine can turn woodworking and furniture making waste into briquetteable mass which is easier to store, transport and sell. Our single shaft shredders provides you with features found in much more powerful and expensive shredding units while keeping the price down to earth. A couple of them: The horizontal hydraulic ram: Assists the rotor by pushing the material to provide maximum working area efficiency. Is controlled by an algorithm to ensure safety and efficiency Gimbal-mounted hydraulics provide a high lifetime Ladder frame chassis and enclosed hydraulics to dampen noise, vibrations and increase safety Drivetrain The drivetrain is protected against hits from foreign objects by using a tripple-disengagement system which is easily resettable and serviceable. Offset placement of the rotor bearings keeps them away from dust and heat buildup. Rotor The centrepiece of the rotor is milled from a single block of high-grade steel. In case of severe damage to the rotor or its shafts, the latter can be replaced without the need to replace the whole unit – costs saved for the user! Blade holders are replaceable – unlike welded-in options, our rotor does not need to be replaced if the blade holders get damaged. 4-sided rotatable blades – a single blade will last you 4 times as long. Our fixed blades can be adjusted to compensate for the increased tolerances once the blades start wearing out – longer runtime with a single set of blades. Output Output and size is controlled by an interchangeable screen which is adapted based on the material used. The shredded material is removed using mechanical, or pneumatic conveyors. Affordable pricing, proven reliability, easy maintenance, quick service and parts delivery & a warranty – these are just a couple of reasons why choose us.

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 700 mm z-travel: 60 mm tool taper: SK40 Cedpfjw Dud Ssx Aqvjri magazine place: 30 Stück table surface area: 630 mm 5axis-CNC-Milling Machine Make: DMG Type: DMU 60 P YOM: 2004 *

Condition: as good as new (ex-display), Year of construction: 2026, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Crjdpfxohl If Ne Aqvei Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Year of construction: 2026, condition: as good as new (ex-display), Manual cleaning is performed using special gloves in the front section. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60°C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard configuration: Cjdef A Nq Aepfx Aqvjri • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring assistance • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Condition: as good as new (ex-display), Year of construction: 2026, -Usable internal dimensions: D=900mm H=580mm (other sizes available upon request) -Spraying pressure: 3.2 Bar -Basket load: 200kg -Tank volume: 130L -Standard accessories: • Oil skimmer • Pumping device • Frame, lid, and housing made of stainless steel • Time-controlled electric steam extraction Codpfx Aef A D Itsqveri • Basket made of stainless steel • Filter made of stainless steel on the suction side of the pump • Heating elements made of stainless steel • Mechanical basket rotation with geared motor • Electrical system IP 65, control via PLC (DGT V4) • Automatic water supply • Safety limit switch monitors lid opening • Spray nozzles made of stainless steel • Weekly timer for heating and oil separator • Operating hour counter

Year of construction: 2019, condition: new, Powder coating system Mini – for beginners Cedpsctx Irsfx Aqveri The Spark / ROMER® powder coating system Mini consists of: Powder oven SLS-9 small (Internal dimensions: 1200x1400x1200mm - without transport system) Powder booth KPZ-2 Delivery time: approximately 12 to 16 weeks after the order Shipping costs will be calculated individually. (Self-collection is also possible) To provide you with a detailed offer for a system tailored to your specific application, we require further details regarding the application and batch size. We will then promptly prepare an offer for a suitable system with the dimensions you require. Payment terms: 30% down payment and the remaining 70% upon notification of shipping readiness.

Condition: ready for operation (used), Year of construction: 1991, Volume flow: 1550 m³/h Pressure difference: 1000 Pa Drive motor: 400 V, 2850 rpm, 1.5 kW Intake nozzle diameter: 150 mm Space required: 1100 x 500 x 2450 mm Crsdpfxsvitd Aj Aqvoi Weight: 133 kg

Condition: new, Wet exhaust system Crodpfxjci Tlre Aqvsi - available in steel and stainless steel - suction output 1650, 3750 or 7000 m3/h - engine 3,5.5 or 15 kW

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Codpfou D Dhxox Aqveri Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.