Grinding wheel balancer

Hofmann

Condition: excellent (used), Year of construction: 1995, Combined jointer and thickness planer from Hofmann, featuring the legendary Leitz-Wigo spiral cutterhead, with a very robust machine construction in a compact design. A special feature of this machine: the jointer table does not need to be unfolded for thickness planing, so no conversion is required. Equipped with a “genuine” spiral cutterhead. Planing width approx. 620mm Thickness table, electrically adjustable with digital display, fine adjustment via handwheel Grooved steel infeed roller Rubber-coated outfeed roller, new Planing height approx. 4 - 240mm 2 feed speeds: 7 + 14 m/min Table length 2520mm Drive motor 5.5kW with automatic motor brake 2-knife cutterhead with spiral-shaped, resharpenable HSS knives Two sets of spiral knives are included, each installed in matching pressure blocks. Resharpening is done by a sharpening service; the sharpened knife sets are then simply screwed into the cutterhead without any adjustment work. Slotted table lips Cutterhead guard Suvamatic Fence swivels with a guide strip Chamfer and bevel adjustment of the jointer tables Rod for hanging the dust extraction hood Fpedpfx Ahjztkyxjlsk Dust extraction connection 2 x 160mm Only a few spots have been touched up V-belt renewed Knives sharpened Rubber outfeed roller renewed Operating manual CE marking No scratches on the tables. Thickness table with two adjustable table sliding rollers Dimensions approx. 2520 x 1200 x 1200mm (LxWxH). Weight approx. 1300kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, grinding length 1000 mm grinding width 300 mm workpiece height 230 mm table surface area 1000 x 240 mm x-travel 1000 mm y-travel 270 mm z-travel 350 mm grinding wheel diameter 240 mm grinding spindle speed 2180 U/min table speed -stepless- 3 - 30 m/min total power requirement 4,5 kW Fpsdpsu Dn Txefx Ahlsk weight of the machine ca. 2,8 t dimensions of machine L x W x H 2,36 x 1,37 x 2,0 m Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachment

Condition: used, Year of construction: 1992, functionality: fully functional, overall weight: 1,000 kg, Hofmann surface planer, 305 x 41 cm Planer width 41 cm Year of manufacture 1992 305 cm planer table length Fpedpeztz Exofx Ahlek Planer fence, adjustable from 90 to 45 degrees 4 kW motor with brake 2 cutterblocks with wedges Resharpenable planer blades Includes 4 spare planer blades, 410 mm Maximum chip removal 10 mm Adjustment for rabbet and chamfer joints Dust extraction connection 140 mm Weight 1000 kg

Condition: excellent (used), Year of construction: 2023, Swivel spindle milling machine Manufacturer: Hofmann Type: TFS 107 Year of manufacture: 2023 Swivel range: -45.5° to +45.5° Table: 2,000 x 813 mm Table height: 890 mm Power: 7.5 kW Speed: 1,500 - 10,000 rpm, stepless speed adjustment Spindle diameter: 30 mm / 40 mm Vertical adjustment: 145 mm Tool holder: MK5 Fpedpeztzntofx Ahlek Feed: Yes Motor brake: Yes Dust extraction port diameter: 120 mm Weight: approx. 820 kg Included: - Augner stop jaws - 40 mm spindle

Condition: used, Parts cleaning system from renowned Austrian company Machine comes from company liquidation, was in operation until the end. Cleaning agents are included. Fpjdpsvcrutsfx Ahljk

Condition: new, Hofmann AB 9000.1 wheel balancing system, serial number: V AC, maximum power: 400W, unused, 100% functional, scope of delivery as shown in the photos. Fodpfxszm D Dqs Ahlopk

Condition: used, Hofmann under-table milling machine Spindle adjustable up-down and tilted electrically 40mm diameter replaceable spindle Spindle speed adjustable via frequency inverter 7.5 kW motor Left-right rotation Spindle lock Fjdszp D Smspfx Ahlepk Brake The milling machine is in working order and ready for use.

Condition: used, Technical details: Fodpfsu Ngybex Ahlopk honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. *

Condition: used, Year of construction: 1996, Second-hand machine Year of manufacture: 1996 Features and technical specifications: - The basic principle of Hofmann machines is their tried-and-tested cast iron construction - Grey cast iron is by far the leader in vibration damping, compressive strength and load-bearing capacity Fpodpfxezk Nnps Ahljk - Milling spindle 30 mm with clockwise and anti-clockwise rotation - Milling stop with stop jaws, central adjustment and single-sided fine adjustment of the jaws - Manual height adjustment with digital display and zero-reset button - Table dimensions: 1200 x 820 mm - Table height: 890 mm - Motor power: 5.0/6.2 kW - Spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm - Height adjustment: 125 mm - Chip extraction connection: 110/120 mm - with Holz Her 2-roller feed mechanism Weight: 850 kg Availability: by arrangement Storage location: 63934 Röllbach

Condition: used, Year of construction: 1979, Used Machine Year of manufacture: 1979 Features and technical specifications: - Planing table width: 500 mm - Planing table length: 2,650 mm - Cutter shaft: 2x strip planer blades Fjdpfxezk Nmxo Ahlopk - Motor: 3 kW - Planing guide can be tilted up to 90° The machine does not have a motor brake and can therefore only be sold for spare parts! Availability: Immediate Location: 63934 Röllbach

Year of construction: 1984, condition: used, machine/vehicle number: 57051/4, Manufacturer: Rhode & Doerrenberg (May) Model: SS 40 U Serial No.: 57051/4 Year of Manufacture: 1984 Weight: 950 kg General / Technical Data: Used drill grinding machine from German production for 2, 3, and 4-edged tools, in good condition. Diameter range: 5 mm to 40 mm Fedpfx Ajc Nv S Ashlepk Tool length: 500 mm Point angle: 80° to 160° Clearance angle: 1° 30“ to 10° Grinding wheel: 210 x 127 x 50 mm (cup wheel) Tool body: 2, 3, and 4-edged drills and countersinks Grinding direction: Left and right-hand cutting tools Machine dimensions (l x w x h): 1350 mm x 1100 mm x 1400 mm Power connection / Control voltage: 380 V 50 Hz / 220 V Motor power / Total power: 2.2 kW / 2.55 kW Accessories / Special equipment: • 2 grinding wheel holders with grinding wheel • 8 collets for drill chuck, manufacturer Forkardt • 6 MK tool holders & drill extensions • Coolant system • Machine documentation & electrical wiring diagram Remarks: The machine is located in our warehouse, connected to power, and can be demonstrated by appointment.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, number of blades: 4, overall weight: 1,100 kg, working width: 600 mm, TECHNICAL DETAILS Working width: 600 mm Height: 200 mm Jointer table length: 2,100 mm Number of planing knives: 4 pcs Feed speed: 7 + 14 m/min MACHINE DETAILS Machine weight: 1,100 kg EQUIPMENT Fpodpfx Ahszkt Iaolek Aigner auxiliary fence in the jointer fence Machine stand in cast iron design Thicknessing table with 4-way guidance Handwheel adjustment Guard for the bridge

Condition: good (used), 4. Axle for DMU 80/100/125 Fjdpfszkqc Ujx Ahljpk Was installed on a DMU125 and is in perfect working order.

Year of construction: 2015, condition: excellent (used), Three-jaw chuck Manufacturer: Röhm Diameter: 200 mm With individually adjustable jaws Short taper size: 6 Taper diameter: 106.390 Bolt circle diameter: 133.4 Weight: 24.5 kg Fodpfsd Th I Tjx Ahljpk Year of manufacture: estimated

Condition: ready for operation (used), Year of construction: 1991, Hofmann TFS 1200 tilting table milling machine Year of manufacture: 1991 Machine no.: P127-91-194-695 Motor: 54.7 / 5.7 - 11 / 13.5 Tilting range: -5° to +45° Motor brake Motor: 2 speeds / pole-reversing 6 speed stages: 3 / 4 / 5 / 6 / 8 / 10,000 rpm Right-hand and left-hand rotation Fodpfx Aszmcz Ishljpk Table size: 2000 x 830 mm Milling arbor diameter: 30 mm Milling fence with fine adjustment Height adjustment: manual, with handwheel Tilting adjustment: manual, with handwheel Lateral sliding table for slot and tenon machining Feed device: 3-roller Elu, infinitely adjustable Dust extraction connection: D 2 x 120 mm Space requirement: approx. 2000 x 1600 x 1400 mm Weight: approx. 1000 kg