Caterpillar boom lift

Hinowa Lightlift 20.10 Performance IIIS

Condition: new, overall weight: 47,000 kg, axle configuration: 2 axles, Year of construction: 2025, Technical data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Total weight: 47,000 kg Fifth wheel load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3,750 mm Fifth wheel height loaded: 1,200 mm Steering radius to the rear: 2,300 mm Loading area length: 6,850 mm Extendable by: 5,500 mm Loading height with max. load: 350 mm Ljdpfoizu Nwex Aamjai Chassis length: 2,600 mm Loading height of rear chassis with max. load approx: 1,005 mm Suspension travel: -150/+450 mm Axle spacing: 1,360 mm Total width: 2,540 mm Total weight depends on fifth wheel load. Low bed: Low bed with external supports in extendable design "SUPER LOW" design, length approx. 6,850 mm. Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking. The supply lines are protected in the extendable supports and automatically adjust to the respective low bed length. 5 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 6 pairs of threaded blocks on the inner support for mounting screwable RUD rings. Rear chassis: Rear chassis with closed outer frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of tension rings lying in the trough (LC 8,000 daN+5,300 daN). 2 pairs of stake pockets for 100 x 50 mm stakes in the outer frame Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,785 mm. Gooseneck can be raised/lowered hydraulically and removed. Technical fifth wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2 and 6 x 4 PENDEL-AXLE: "PENDEL-AXLE", all axles hydro-mechanically forcedly steered. Hose rupture valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinder with shut-off valves and pins for securing in raised position. Final painting of the axles with 2 layers of 2-component paint in a single color in "FAY-Gray-34-0260". Technical axle load: 12,000 kg Hydraulic axle compensation. Axle tool. Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting cables to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: Steel construction made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paint: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat in a single color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint possible. Tires: Tires 245/70 R 17.5 3PMSF At the manufacturer's discretion. Load index (146/146F) Preparation for screw-on container positioning for 1x 20' or 1x 40' container on the outer supports. Without container locks. i i2" kingpins iA galvanized steel bulkhead, approx. 400 mm high. iA spare wheel with holder in front of the bulkhead. i2 brake shoes with holder on the bulkhead. iYellow-red air couplings on the galvanized connection strip at the front. Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles. (without insta

Condition: new, empty load weight: 30,000 kg, maximum load weight: 9,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,190 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 r 17,5, Year of construction: 2023, Equipment: ABS, NEW, Bpw drum brakes, 1st axle liftable, 3rd axle steerable, 40 mm hardwood coated gooseneck bed, various anchor rings, side wideners with tables x exceptional load, toolbox, hydraulic double ramps, hydraulically shrinkable and widenable, neck rails, 5,600 kg electric winch. Lajdpfjg Dnc Asx Aamji

Year of construction: 2025, condition: new, Mobile loading ramps AUSBAU from the manufacturer Standard models with 6, 8, 10 and 12 tons load capacity. We offer loading ramps from the manufacturer in any dimensions you need. They save the loading / unloading time of the truck / wagon. You can move them over the enterprise territory with the help of installed automotive wheels. Mobile loading yard ramps AUSBAU operate in any weather conditions. Warranty: 18 months. World-wide delivery. Finished and made-to-order. CE Standard. Read more about loading ramps on our website. id: ISGhNU Technical characteristics: ● Load of ramp, kg - 6000 / 8000 / 10000 / 12000 ● Total length of the ramp, mm - 9000 / 9500 / 10500 / 11200 / 12000 / 13000 ● The total width of the ramp, mm - 2130 ● Width of riding surface, mm - 2000 ● Length of sloping part, mm - 8000 / 8500 / 9200 / 9900 ● Loading stage length, mm - 300 ● Min. working height, mm - 900 ● Max. working height, mm - 1550 / 1750 ● Height of the hand railings, mm - 180 ● Number of entry bridges, pcs - 2 ● Number of wheels, pcs - 2 ● Wheels - solid ● Material - S235 ● Riding surface - zinc-coated anti-skid grating ● Components - rubber wheel chocks – 2 pcs, tow pole – 1 pc, set of chains on the ramp – 7 pcs, manual hydraulic pump with handle – 1 pc. Additional options: ● electric hydraulic station on the ramp; ● three-sided unloading mobile ramp. Supplied with safety legs; ● safety legs adjustable in height, installed on ramp; Lajdpfxeiqk E To Aamei ● tent cover over the ramp; ● additional protective hand railings, 1100 mm height; ● additional pair of wheels: 4 instead of 2; ● choosing a different color (standard color is red). Mobile ramp operating principle: The forklift lifts the edge of the ramp (inserting the fork into the rigid tow pole) and drives it to the truck. Using a hydraulic pump, set the required height of the ramp (from 900 mm to 1750 mm). Ramp complete with wheel chocks and chains. Chocks fix the ramp. Chains securely fasten the mobile loading ramp to the truck. Then the loaded forklift moves up the loading dock ramp and drives directly into the truck or container. The photos shown are for illustrative purposes only. For detailed sales information, please contact the manufacturer.

Condition: excellent (used), Year of construction: 2025, fuel type: hybrid, color: orange, Weights Empty weight: 2.330 kg Functional Mast: articulated arm Laedpfxow Iazce Aamsi Lifting capacity: 200 kg Working height: 1.760 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Max. horizontal reach: 850 m Max swing of arm in degrees: 180 Max swing of platform in degrees: 320 Transport dimensions (LxWxH): 5,6x0,89x2,01 Production country: IT Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: used, mileage: 21,683 km, power: 397 kW (539.77 HP), fuel type: diesel, color: grey, axle configuration: 10x4, tire size: 385/65R22.5, fuel: diesel, wheelbase: 4,600 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2022, operating hours: 1,332 h, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, parking heater, traction control, = Additional Options and Equipment = - AdBlue system - Alarm system - Differential lock - Electric windows - Remote central locking - Refrigerator - LED headlights - Leather interior - Alloy wheels - Air suspension - Hub reduction - PTO (power take-off) - Radio - Reversing camera - Disc brakes - Power steering - Heated seats - Sun visor - Lane departure warning system - Auxiliary heater - Central lubrication = Notes = Volvo FH 540 10x4. Full air suspension. Dynamic steering. Alcoa wheels. Work lights. Flash lights. Air horns. Erkin World Power. Model: ER-250.000L 10+7 Scanreco radio remote control. 7 x hydraulic outriggers. Winch. Central lubrication system. 10 x hydraulic main boom extension. 5.00 m - 41,000 kg. 6.60 m - 30,500 kg. 8.20 m - 23,000 kg. 10.60 m - 16,250 kg. 12.30 m - 13,100 kg. 14.20 m - 10,600 kg. 16.40 m - 8,700 kg. 18.60 m - 7,110 kg. Ledpfx Aev Ni Abeamsai 20.80 m - 6,130 kg. 23.30 m - 5,220 kg. 25.90 m - 4,500 kg. 1 x manual extension. Fly jib: 7 x hydraulic extension. 29.50 m - 1,680 kg. 31.40 m - 1,430 kg. 33.40 m - 1,200 kg. 35.10 m - 1,000 kg. 37.40 m - 850 kg. 39.50 m - 700 kg. 41.50 m - 600 kg. 43.50 m - 550 kg. 3 x manual extension: 45.80 m - 390 kg. 47.80 m - 250 kg. 50.50 m - 200 kg. = Further Information = Technical Information Number of cylinders: 6 Drivetrain AdBlue system: Yes Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/65R22.5; Steered; Tire tread left: 80%; Tire tread right: 80% Front axle 2: Tire size: 385/65R22.5; Steered; Tire tread left: 80%; Tire tread right: 80% Rear axle 1: Tire size: 315/80R22.5; Twin tires; Inner left tread: 80%; Outer left tread: 80%; Inner right tread: 80%; Outer right tread: 80% Rear axle 2: Tire size: 315/80R22.5; Twin tires; Inner left tread: 80%; Outer left tread: 80%; Inner right tread: 80%; Outer right tread: 80% Rear axle 3: Tire size: 385/65R22.5; Steered; Tire tread left: 80%; Tire tread right: 80% Dimensions Dimensions (L x W x H): 1106 x 255 x 400 cm Weights Unladen weight: 43,180 kg Payload: 12,820 kg GVW: 56,000 kg Functional Crane: Erkin World Power Interior Upholstery: Leather Financial Information Price: On request Identification Model number: FH 540 / 10x4 / ERKIN 250,000 / = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We make every effort to provide correct information, but no rights can be derived from the information provided.

Condition: new, functionality: fully functional, Year of construction: 2025, Available in stock Capacity – 500 l. Diesel engine. Self-Propelled. Diesel Burner. Engine fuel tank – 50 l. Oil tank – 30 l. Thermal oil heater – 80 l. Ledpfed Swd Uex Aamjai Electrically heated hose – 6 m. Heating the mastic through the thermal oil (thermal oil jacket).

Condition: new, machine/vehicle number: wtcs750s, Westtech Woodcracker CS750 Smart - available immediately Laedpfx Aoiady Eeamji Equipment: - Tiltator can be rotated continuously - Cutting diameter: 750 mm - Grab opening width: 1,280 mm - Own weight (basic - fully equipped): 820 - 980 kg - Recommended liter output: 65 - 110 l/min - Recommended operating pressure: 230 -280 bar - Service weight of carrier vehicle: 15 - 30 t - Saw box: actively suspended - Chain lubrication of saw: grease - Optional: Power tiltator can be rotated continuously Available in multiples / fits perfectly with Magni RTH 6.30 SH & Magni RTH 6.35 SH. Can also be offered in conjunction with a Magni. Also fits Merlo. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, operating pressure: 350 bar, pressure: 350 bar, fuel: diesel, power: 3 kW (4.08 HP), New High Pressure Unit Also looking for a New HD unit, we make them to measure for you, here we introduce our latest HD unit, this is unique and is a real all-rounder that has not yet been offered in this way by anyone!!!. Details VIHT2350/20/40/100 (demo) Motor 30 kW at 1500 rpm / 36 kW at 1750 rpm 2 x mazzoni pump 21 liters per minute per pump!!! at 1450 rpm set to 350 bar. Due to the low speed, this engine is nice and quiet. Laodernkgiepfx Aamsi Pressure control by speed and manual adjustment of 2x zero 350 valves, hoses virtually pressureless (10 bar) with closed handle. this allows you to work safely because the hoses and pumps are virtually pressureless, and they build up the pressure when the handle is opened. 2 x burners for making hot water up to 120 degrees, on request we can also offer V+ Steam where we have 140 degrees at the nozzle. This machine makes it possible for 2 employees to work independently at the same time. so with different temperatures and pressure. the drive is specially developed and ensures a long life and easy maintenance. on board are 2 diesel tanks, 1x90 liters for the engine and 1x90 liters for the burners. The machine is developed in such a way that it can run 24 hours a day. it is also equipped with 2 water tanks of 325 liters each, so you have 650 liters of water in stock. The Vibemo easy start panel gives you protection against overheating and low oil level (engine stops) and indicates by means of a sign what is wrong. there is also a protection for low water level, and valve open during operation. You can also check the operating hours, speed and dynamo charging current here. The temperature control is made simple and shows the set and actual temperature. As an extra, we have mounted a 3-way tap as standard that allows you to spray with 350 bar and 40 liters per minute (also with hot water up to 100 degrees max). so it can also be used for example for sewer cleaning or stable cleaning. Furthermore, it is equipped with an emergency stop, internal lighting in the engine room and in the reel room. Reels are made of high-quality stainless steel, just like the burners. Hoses are all standard 50 meters long. Furthermore, equipped with pre-filter water, an intermediate filter per pump. 2 x handle, with 2 x lance flat jet 25 degrees 20 liters, 2 x lance with dirt fear 20 liters, 1 x lance flat jet 25 degrees 40 liters, 1 x lance with dirt fear 40 liters. 2 x pressure gauge for reading the set pressure. 3 x level measurement for diesel tanks and water tank, so everything neat and tidy. Everything built in tandem axle trailer 2500kg lxbxh 300x150x150 We provide a 1 year warranty and a full service package. Delivery time approx. 6 to 8 weeks. Photos are an example and may therefore differ slightly from reality.

Condition: ready for operation (used), Year of construction: 1990, Böcker LH 710 with electro-hydraulic drive year of construction 1990 No.3216/2 nominal load 300kg dead weight 255kg Lasdpfx Ajhh Swkoamji lifting height 7100mm Overall height 2200mm

Condition: good (used), Year of construction: 2001, Manufacturer: BEHRINGER Type: HBP 530 A Year of construction: 2001 Specifications: Metric Metric US Standard Capacity 90° 530 x 530 ° Min, saw length 40 mm Max. Saw length 17 - 110 Saw power 12 kW Chip conveyor Yes Lasdpou U Narefx Aamoi Dimensions (estimate) length 4000 mm width 2250 mm height 3270 mm weight 4400 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.