Clamping devices from HILMA-RÖMHELD

HILMA-RÖMHELD div. Spannmittel

Condition: excellent (used), Year of construction: 2013, turning height: 2,150 mm, turning diameter: 2,000 mm, Swing diameter 2,000 mm, turning height 2,150 mm, X-axis 1,150 mm, rotary table diameter 1,800 mm, chip conveyor, 25-position tool changer, fleece filter cleaning system, Iedpfxjw Edvyo Aa Ejtr

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Itedpfx Ast Hagnoa Eor Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Options: Chip conveyor Renishaw RMP 60 Itedpfjwnbn Sox Aa Eor 15 bar coolant Air blow-off Performance package 8 MB memory expansion 2 additional M codes Central partition Portable handwheel 4th axis preparation 3-color lamp

Condition: good (used), Year of construction: 2020, machine/vehicle number: 164390-0000-Z2724, Offer 24059 Technical data: Iodpfxorwmkae Aa Estr - Jaw design stepped jaws - Jaw width 125 mm - Jaw height 40 mm - Clamping width 1 0 - 216 mm - Clamping width 2 97 - 312 mm - Clamping force 40 kN - Total height 140 mm - Weight 33 kg - Min. Space requirement L 463 x W 126 x H 145 mm

Condition: excellent (used), Year of construction: 2011, axis stroke (X,Y,Z) 742 x 435 x 510 mm Number of spindle head vertical / St. Number of spindles head horizontal / St. The DOOSAN DNM 400 is a vertical CNC machining center designed for precise milling operations in metalworking. It is particularly suitable for small to medium-sized workpieces and offers a solid combination of performance, accuracy and reliability. All technical documents for the machine are available and included. Accessories included. Control: HEIDENHAIN iTNC 530 Travel ranges X-axis: 742 mm Iedpfx Aaewmxfle Eetr Y-axis: 435 mm Z-axis: 510 mm Rapid traverse X-axis: 36 m/min Y-axis: 36 m/min Z-axis: 30 m/min Max. cutting feedrate: 1~15,000 mm/min Ball screw (Diameter × Lead) X-axis: 40 × P12 mm Y-axis: 40 × P12 mm Z-axis: 40 × P10 mm Accuracy Positioning accuracy: ±0.005 mm over the full stroke Repeatability: ±0.002 mm Table size: 920 × 435 mm Min./Max. spindle-to-table distance: 150~660 mm Max. table load: 600 kgf Table surface configuration: 4-125 × 15H8 Max. workpiece height: 465 mm

Condition: good (used), Technical specifications: Briquetting press in good condition Year of manufacture: 2007 Technically inspected in 06 / 2025 Cylindrical briquette: 80 mm Throughput up to max. 150 kg/h *only approx. 3,949 operating hours - Hydraulic press: briquetting press with discharge chute - Hydraulic unit: 4 kW - Pressure: max. 300 bar - Transport dimensions: 1585/2140/H1940 mm - Weight: 1,370 kg Itodpfx Aajwtdk Tj Esr Functional guarantee upon handover We are happy to arrange a free test run!

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 24/32 [kW] - Spindle speeds : 12000 [rpm] - Number of spindle hours : 9122 [h] LINEAR AXES - Travels on X/Y/Z axes : 650/765/520 [mm] - Rapid traverses rates (X/Y/Z) : 40/40/36 [m/min] - Cutting feed rates (X/Y/Z) : 18/18/18 [m/min] A ROTARY AXIS - Travel : 150 [°] (+/-) - Rapid traverse rate : 20 [rpm] - Cutting feed rate : 7200 [mm/min] B ROTARY AXIS - Travel : 360 [°] (+/-) - Indexing precision : 0.001 [°] - Rapid traverse rate : 30 [rpm] - Cutting feed rate : 7200 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 120 - Tool exchange time : 1 [sec] TABLE - Table dimensions : 500 X 500 [mm] - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 160/680 [mm] PALLET CHANGER - Pallet size : 500 x 500 [mm] - Pallets number : 2 - Pallet exchange time : 30 [sec] POWER SUPPLY - Total installed power : 54 [kW] MACHINE HOURS - Number of hours under power : 24226 [h] - Number of working hours : 9122 [h] EQUIPMENT - CNC : Heidenhain TNC530 - Interface : RS232 / USB / PCMCIA - Electronic handwheel - 3 colors status lamp - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Chips conveyor - Spindle cooling unit - Tool probe : Renishaw - Electric transformer Isdpfx Aasuhbz Us Eotr

Condition: excellent (used), consisting of: 2 pcs. Art. No. 47155: Makro Grip 125 Centering Vise, clamping range 155 mm 1 pc. Art. No. 41350: Extended Stamping Unit 1 pc. Art. No. 41010: Center Marking Device for Stamping Unit 16 pcs. Art. No. 45570: Mounting Bolts, diameter 20 mm 1 pc. Art. No. 47520: Double Mounting Body 1 pc. Art. No. 47355: Makro Grip 125 Centering Vise, clamping range 355 mm 1 pair Art. No. 44251: Avanti Base Jaws Iedpjxauacjfx Aa Ejtr 4 pcs. Art. No. 44258.76: Top Jaw 77x126mm for Avanti 125 4 sets Art. No. 45570.10: Spacer Mounting Bolts, diameter 20 mm 2 pcs. Art. No. 47255: Makro Grip 125 Centering Vise, clamping range 255 mm 3 pcs. Art. No. 45742: Plate L384xW384xH27 mm, 4-position grid plate 96 (photo attached) 1 set Art. No. 47355-TG27: Twin-Grip Conversion Kit for Makro Grip 125 No. 47355 1 pc. Art. No. 47520: Double Mounting Body 1 pc. Trolley for Stamping Unit

Condition: new, LIFTING EQUIPMENT FROM 5 - 10t WEIGHT TRANSPORT TROLLEYS FROM 5 - 30t WEIGHT Itedpfxsi Akpdo Aa Ejr A LOT OF VARIETY NEW IN STOCK

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 0i-MD, total height: 3,170 mm, total length: 5,500 mm, total width: 2,892 mm, table width: 760 mm, table length: 2,160 mm, table load: 1,800 kg, overall weight: 15,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 800 mm, spindle motor power: 18 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED vertical machining center “DOOSAN mod. DNM 750L-” with FANUC 0i-MD CNC Itsdjw D Aynspfx Aa Ejr