Tryout Press - hydraulic

HESSE by LFSS AT 1520/150

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Dsdjv Rwu Uepfx Aa Iewc Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: good (used), Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, Dwedjd Tk Stepfx Aa Ioc -Table dimensions: 700 x 405 mm -Travel paths: Z 330 mm/Y 410 mm/X 630 mm -Quick stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 Dwodpfx Aaov A S Efj Isc table surface area: 445 x 315 mm distance table - lower edge spindle: max. 520 mm table travel: längs: 250 mm table travel: quer: 330 mm table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. 5x T-slots to DIN 650: a=10; h=18; b=18; c=8mm Features: Two-way digital ACU-RIDE display *

Condition: new, Hydraulic workshop press LFSS, type DPM 1070/150 Dwsdpfx Aasgiphne Iec Technical specifications: Pressure: 150 t Stroke: 300 mm Table area: 1070 x 290 mm Distance between column guides: 1070 mm Approach speed: 8.0 mm/sec Working speed: 5.0 mm/sec Retraction speed: 10.0 mm/sec Motor power: 11 kW Machine weight: approx. 1900 kg Space required: approx. 2110 x 1000 x 2340 mm Equipment: Hydraulic workshop press Table height adjustment V-block tool insert Pressure gauge

Condition: used, mileage: 135,996 km, power: 110 kW (149.56 HP), first registration: 04/2001, overall weight: 9,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, Year of construction: 2000, Equipment: ABS, air conditioning, all wheel drive, Equipment: - Split-range gearbox with work groups - Towing jaw coupling (Maul-AHK) with full brake system - Tipping cylinder - Engine-driven PTO including front PTO - Driver’s suspension seat - Double passenger bench seat - Rear cab window - Rotating beacons - Additional work lights Municipal specification: - Front mounting plate, size 3 - Two-circuit hydraulic system - 4-cell hydraulic system - Separate return line at rear - Snowplough relief function - Hydraulic connector sockets: - Front: four-pole cell 1+2+3+4 - Rear: four-pole cell 2+3 - Prepared for high-performance hydraulics - Pressure and separate return line midships on 2nd circuit - Front pressure line for 2nd hydraulic circuit Dodpfx Asrt Aypsa Ijwc Miscellaneous: - First delivered in Germany - 2 previous owners - 3,770 kg payload according to registration - Downgrade to 7,500 kg possible Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles in the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing solutions with favorable special rates. Please contact us for a tailored quotation! Trade-in of your commercial vehicle or construction equipment is welcome. If a new TÜV inspection is desired, we are happy to provide a quote from our partner workshops. Our offers are generally WITHOUT new TÜV inspection. Delivery of your 'new' commercial vehicle can be arranged through our external partners for an additional fee. The information provided in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability or warranty for typographical and data transmission errors. Listed equipment may need to be checked separately. Subject to prior sale and errors.

Condition: used, mileage: 93,330 km, power: 110 kW (149.56 HP), first registration: 10/2009, fuel type: diesel, empty load weight: 5,600 kg, maximum load weight: 3,700 kg, overall weight: 9,300 kg, axle configuration: 4x4, wheelbase: 2,700 mm, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 3, loading space length: 2,480 mm, loading space width: 2,030 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, all wheel drive, cabin, cruise control, differential lock, fog lights, hydraulics, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel body, short cab, 1 air-suspended seat, rear window, electric window left, electric window right, air conditioning, Telligent shifting system, ABS (anti-lock braking system), differential lock, work lights, rotating beacon, trailer coupling with air and light connections, winter service equipment, green environmental badge. Wheelbase: 2700 mm, body: 3-sided tipper 8331, operating hours, transmission: DC-8 reversing gearbox UG100, two-circuit proportional hydraulic system with 3 sections, separate return line at the front and in the middle, pressure line at the front and in the middle for the 2nd hydraulic circuit, plow relief, differential lock front and rear axle, permanent all-wheel drive with lockable longitudinal differential, snowplow mounting plate, size 3, total weight: 17,300 kg. 8334 operating hours! Dsdpovhmuxjfx Aa Iswc Available at an extra cost: Snowplow Flötzinger -9393- DK-SA and spreader Gmeiner -9385- 1500 TC FS! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: like new (used), functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 400 t, operating speed: 3 mm/s, reverse speed: 18 mm/s, table width: 2,520 mm, table length: 6,000 mm, total length: 6,000 mm, total width: 3,650 mm, total height: 3,250 mm, overall weight: 28,500 kg, pressure: 319 bar, The TL-400-6000E hydraulic press belongs to the T/NC series and is custom-designed for straightening large welded structures and oxy-cut plates. Like all the hydraulic presses in the T/NC series, its design facilitates the loading and unloading of large pieces, plates, or structures. It allows access to different pressing points without the need to move the piece, thanks to the lateral movement of the cylinder and the longitudinal movement of the bridge. Power tn 400 Engine Power kW 11 Working Speed mm/s 3 Approach Speed mm/s 10 Dodpfx Aewpgmvja Ijwc Return Speed mm/s 18 Maximum Pressure Bar 319 Piston Stroke mm 450 Lower Table mm 6.000 x 2.520 Front Clearance mm 2.560 Vertical Clearance mm 700 Head Displacement mm 1.900 Bridge Displacement mm 4.900 Working Height mm 800 Total Front mm 6.000 Total Side mm 3.650 Total Height mm 3.250 Weight mm 28.500 STRUCTURE AND TABLES • Features an electrowelded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Longitudinal bridge movement is achieved using a frequency inverter and toothed belt. • Lateral movement of the head is motorized and controlled via a frequency converter. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free anti-wear guides. • Equipped with a removable and interchangeable pad to prevent wear on the piston and machined at the end to adapt to tooling. • Includes a standard anti-rotation device for the cylinder and a calibrated front with end-of-stroke switches to adjust the cylinder's travel. • Motorized hydraulic group with two speeds and automatic deactivation of high speed. • Includes a cylinder decompression valve. • Pressure regulator. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel includes a selector that allows choosing between manual or semi-automatic operation. • Also includes a selector for choosing high-speed approach or low-speed working. • Operation is carried out via a suspended control station with emergency stop and low-voltage operation. • Includes a maneuver confirmation button. • Includes a perimeter-mounted safety rope device.

Condition: used, mileage: 78,144 km, power: 130 kW (176.75 HP), first registration: 05/2001, fuel type: diesel, empty load weight: 7,072 kg, maximum load weight: 418 kg, overall weight: 7,490 kg, axle configuration: 4x4, wheelbase: 3,000 mm, brakes: engine braking, driver cabin: other, gearing type: other, emission class: euro4, number of seats: 2, loading space length: 1,800 mm, loading space width: 2,200 mm, loading space height: 400 mm, Equipment: air conditioning, all wheel drive, cabin, crane, differential lock, * German vehicle * 1st hand * Condition see photos * Hiab crane * Radio remote control * Green sticker thanks to DPF filter * Crane lifting capacity 3,050 kg at 2.10 m * Crane length 6.90 m = 900 Kg. * 5.10 m = 1,220 kg. * 3.50 m = 1,800 kg. * 5th + 6th control circuit * Off-road tires * 4-fold hydraulic outriggers * Platform dimensions 1.80 m x 2.20 m x 0.40 m * Steel floor and steel dropsides * Municipal plate * Worktop * Trailer coupling * Air conditioning * Heated mirrors * ABS * Engine brake * Air-suspended driver's comfort seat * Heated seats * Wheelbase 3.00 m * GVW. 7,490 kg. * Unladen weight 7,072 kg. * Payload 418 kg. If a new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. Djdpfx Aovhqxuja Iowc All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: ready for operation (used), Electric crane Fabr.ROBUR Type: P40E, year 1986, 2200 operating hours. Max. lifting capacity 5500 kg. Includes charger, 48V batteries. Ready for operation. Dedpfxsyf Uzle Aa Iowc

Condition: used, total length: 4,490 mm, Year of construction: 2013, load capacity: 5,500 kg, Crane Dwodpfsydfrlsx Aa Isc Ormig 5.5tmE Drive Electric Year built 2013 Lifting weight (kg) 5,500