Plate Bending Machine - 4 Rolls

HESSE by ISITAN 4RH 10x90

Condition: new, number of rollers: 4, number of digital displays: 3, Equipment: cone bending device, hardened rollers, swiveling upper roller, – 4 rolls – Capacity: 1270 x 4/5 mm – Pre-bending capacity: 1270 x 3/4 mm – Hardened rolls – Cone rolling capability – Top roll diameter: 130 mm – Bottom roll diameter: 130 mm – Side roll diameter: 130 mm – Digital display for left roll movement – Digital display for central lower roll movement – Digital display for right roll movement – Top roll hydraulically swiveling Predexytlqopfx Akijc – Steel construction ST-52 – Overload protection – Documentation – 400 V

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Pjdpezcpu Ujfx Akierc Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls • Digital display for roll positioning All information without guarantee.

Year of construction: 2017, condition: ready for operation (used), An asymmetrical three-roll plate bending machine MG is available. Working width: 2000mm, roller diameter: 130mm, max. plate thickness: 3mm, power: 6kW, weight: approx. 2000kg. An on-site inspection is possible. Prsdpfx Asyttwbjkijc

Condition: new, neu Prodpfsyb Sz Uox Akioc ca. 12 Wochen ab Auftrags Türkei 21800 € 418.56 € 1270 mm 5 mm 5 mm 4 mm 5 mm 4 mm 4 mm 3 mm 130 mm 130 mm 130 mm 5 m/min 2,2 + 1,1 kW 3020 mm 1150 mm 1110 mm 2150 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 24500 € 470.4 € Prsdjynmwdopfx Akioc 1550 mm 4.5 mm 4.5 mm 3.5 mm 4.5 mm 3.5 mm 3.5 mm 2.5 mm 130 mm 130 mm 130 mm 5 m/min 2,2 + 1,1 kW 3300 mm 1150 mm 1110 mm 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed

Year of construction: 2025, condition: ready for operation (used), Automatic Coil Cut-to-Length Line manufactured in 2025. This SACFORM CRL1503-6 is designed for processing aluminum, mild steel, and stainless steel with a material thickness capacity of 1-3 mm. It features a maximum coil weight of 6000 kg and a finished sheet length of 500-4000 mm. If you are looking to get high-quality cut-to-length capabilities, consider the SACFORM CRL1503-6 machine we have for sale. Contact us for further details regarding this machine. • Capacity: 1500 mm width x 1–3 mm thickness (AL/MS), up to 1.5 mm (SS), 6-ton coils • Materials: Aluminum (AL), Mild Steel (MS), Stainless Steel (SS) • Finished sheet size: width 500–1500 mm; length 500–4000 mm • Coil specs: ID 490/610 mm; OD max 1400 mm; weight max 6000 kg • Line speed: 30 m/min free working speed (start-stop shear adds ~2.5 s per cut) • Operators: 1 • Power and utilities: • Electrical: 380 V, 3-phase, 50 Hz; auxiliary 220 V, 50 Hz; 24 V DC solenoids • Installed power 32 kW; typical working consumption 13 kW • Pneumatic air: 6 bar • Hydraulics: service 120 bar; main service 220 bar; 2 hydraulic units, each 40 L • Control and electronics: Siemens PLC; Siemens/Rexroth electronics and control panel; 7" touchscreen; remote support capabilityLine configuration (included modules and key specs) • Hydraulic coil loading car: • Capacity 6000 kg (single coil), max width 1500 mm, max OD 1400 mm • V-type bed, hydraulic traversing and lifting (300 mm stroke), panel control • Single-mandrel hydraulic decoiler: • Capacity 6000 kg; max strip width 1500 mm; ID 490–610 mm; OD 1400 mm • Hydraulic mandrel with conical expansion; motorized drum with reducer, adjustable speed • Upper pressure/safety arm; laser sensor for controlled decoiling and auto stop • Automatic routing/threading platform with servo bending arm: • Automatic coil threading and transfer to straightener • Bending arm: 2 rollers Ø110 mm, servo-driven; 2 pistons • Platform movement: hydraulic up/down and fwd/back; automatic, no manual threading • Straightening unit: • Speed up to 30 m/min; working width 500–1500 mm • 11 rollers total: 7 straightening, 2 feeder, 2 pinch (all Ø110 mm) • Motorized straightener adjustment; hydraulic openable roller group • Pneumatic roller pressure; low-backlash gear group; gear material 8620 • Vertical bearing guides; 2 guiding units; width adjustment via gear system • PVC coating feature included • Servo feeder: • Speed up to 30 m/min; max width 1500 mm; thickness 1–3 mm • 2 servo rollers (upper/lower) Ø110 mm; roller material 4140 • Encoder-based cut-to-length control; pneumatic pressure; low-backlash gears Prsdpfozwc Ipox Akiec • Guiding: double-sided lateral guides, horizontal guide rollers, gear-width adjustment, right/left alignment to 90° • Servo control: automatic feeding cycle, programmable velocity, programmable cut length and quantity, memory for 250 programs and up to 50 lengths, 7" touchscreen, 8 external outputs • Start-stop guillotine shear: • Cutting capacity 1–3 mm; width 1500 mm • Blade material 2379; high-carbon/high-chrome blades; 2 edges upper, 4 edges lower • Adjustable blade gap; mechanical sheet clamping • Approx. 2.5 s cycle time loss per cut; Teflon slideways on cutting beam • Hydraulic and pneumatic brands: Bosch Rexroth/Bucher hydraulic valves; Festo/Pemaks pneumatics; motors Gamak/Yilmaz • Electrical/automation: Siemens PLC; Siemens/Rexroth components; electrical cabinet and automation systemNotes • Stainless steel capacity limited to max 1.5 mm thickness.