Offset printing press

Heidelberg GTOZP 52

Condition: used, 2 Farben Offsetdruckmaschine - 2 Color Offset Press Heidelberg GTOZP-52+ N+P 2 Color Offset Press Heidelberg GTOZP-52+ N+P Year 1992 - Serial-No. 707612N Size max. 360 x 520mm Impressions 53 Mio. Dampening System Alcolor with Baldwin Plus Version - Imprint Unit Numbering & Perforation Wendung 2 Perfecting 2/0 - Manuals Included Godpfsy Ndhksx Amusub Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1979, Approx. 76 million prints Format 32 x 46 cm Plus version Standard dampening Available: immediately Gusdpoylwzujfx Amueb

Condition: used, Year of construction: 1985, impressions 76 Mio. max. printing speed sheets 8000 /h max. paper size 36 x 52 cm Gsdpfoykb Hxox Amusub numbering unit include N+P dampening system Varn Kompac

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Gujdpfxsuf Sy As Amueb Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: used, Year of construction: 2002, Manuelle Winkelverpackungsmaschiene / Semi-Automatic Foil sealing machine ROBOPAC Micra MYear 2002 - Serial-No. 21037 Produktabmessungen / Product sizes Abmessungen der Schweißleisten (LxB) 540x390mm Produktionsleistung 300Produkte/Std. / Production 300pcs/h Elektrischer Anschluss / Power supply: 230V 1Ph 50/60Hz(V) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Guedpfx Amsh Aybleusb

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Gujdpsxz Ewnsfx Amuob

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Foldingmachine for 8 pages ! Make: HEIDELBERG-Stahlfolder Type: TI 52-4 - 4 - RD Format: 520 mm built: 2010 Mach.-Nr.: 1224431350 - Continuus feeder - double infeed-suction-wheels - 1. fold-station 52 cm, 4 buckles - 2. fold-station 52 cm, 4 buckles - anti-noise-hood - center control-station for all functions - standard delivery - compressor - tools, technical documentation Price on request ,-- / FCA ex DK Gsdow I S Eyjpfx Amueub Availability: Immediately ! Please ask for further detailed pictures ! Video available !

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Guodpfxoh Eibas Amujb Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, PCS-G control desk, IVS - Ink Volume Setting, Grafix dry spray > RYOBIMATIC dampening system, Ryobi RPC semi-automatic plate change > Preset - automatic size device > Suction feed board > Automatic blanket, roller and impression-cylinder washing device > High pile delivery, non-stop delivery Technotrans Gujdpfsy Hx Imox Amusb LED UV dryer Interdeck between 1st and 2nd unit 45 million

Condition: excellent (used), Like brand new machine for soft and hard cover books! Both PUR and EVA capability! Production speed: 1–3 books per minute Min/max binding thickness: 0.1–45 mm Max. binding length Up to 455 mm Min/Max. binding heigh: 140 mm / 320 mm Max soft cover thickness: Up to 400 g/m2 Voltage (V) / Frequency (Hz) 220–240 / 50–60 Max. current: 3.8 A Machine dimensions (W x L x H): 107 x 60 x 64 cm Weight: 90 kg Standard tools Hard & Soft cover tool set Gujdpfx Aevnzx Ejmuob Casemaker available also