Jig Grinding Machine

HAUSER 3. S.M.O.

Condition: good (used), Coordinate grinding machine Jig grinding machine Brand: Henri Hauser SA. Model: 3.S.M.O. Serial No.: 76 No.: 218···600 FAGOR 2-axis height display. Machine Type: Jig Grinding Machine Control Type: Conventional X-axis travel: 400 mm Y-axis travel: 250 mm Workpiece height: 500 mm Grinding diameter: 220 mm Table top: 600 x 320mm Hfsdpfx Asktkmvjfnsc Neckline: 310mm Angle Range: 12° Grinding carriage adjustment - vertical: 110 mm Lifting speeds: 0 - 6 m/min. Grinding spindle speed: max. 50,000rpm Peripheral speed: max. 35m/sec Maximum weight of the piece on the table: 80 kg.

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Hsdpfxjrgahxo Afnjfc

Condition: used, Year of construction: 1968, Technical details: x-travel: 400 mm y-travel: 250 mm workpiece height: 500 mm grinding diameter: 220 mm table surface area: 600 x 320 mm throat: 310 mm range of angles: 12 ° grinding wheel stroke - vertical: 110 mm stroke speeds: 0 - 6 m/min grinding spindle speed: bis 50000 U/min peripheral speed: max. 35 m/sec capacity: ca. 7 kVA power capacity: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 3 x 3 x 3 m rotary table d = 300 mm frequency changer * Hedpfxjvbzwzj Afnofc

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm Hfedpfxsw T S Sqo Afnsc WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Indexing plate teeth count: 120 Angular vernier reading: 20' Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Micrometer travel: 25 mm Reading precision: 0.01 mm Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: excellent (used), Control : D.Electron Z 32 centre height 220 mm Centre distance 1000 mm turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm spindle mounting CL 6" spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4 Hfedpsd Sitkefx Afnoc

Year of construction: 1988, condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Hodpfsma Snxjx Afnjfc

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. Hfedpfxshzbipj Afnjc - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), pressure 0,5 - 20 t Hfodpfx Ajvpaa Rjfnsc max. workpiece diameter 5 - 75 mm threading length 2000 mm pitch in mm 8 mm diameter of roll spindle taper 69,85 tool diameter 200 mm roll spindle turning speed range 20 - 90 U/min stroke 0 - 20 mm total power requirement 7,5 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 1,9 x 1,1 x 1,2 m

Condition: new, Year of construction: 2023, pipe drilling machine, inclined drilling machine, automatic drilling machine TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + TO BE INSPECTED UNDER POWER - minimum quantity lubrication - manual material clamping - manual feed - max. tube length 3.000mm (option 6.000mm) - positioning accuracy +/- 0,2mm Hjdslgvkiepfx Afnofc - 10 stops (can be extended as required) - manual insertion and removal of material - drill head swivels +/- 50 - manual 360 degree tube swiveling device - power drilling unit 1 x 2,2 kW - motor speed 295 - 2950 rpm - display speed on touch panel - illumination drilling unit - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors Hfodpfx Aeinh Rqefnsc - electronic heat compensation Y- + Z-axis