Jig Grinding Machine

HAUSER 3 SMO

Condition: good (used), Coordinate grinding machine Jig grinding machine Brand: Henri Hauser SA. Model: 3.S.M.O. Serial No.: 76 No.: 218···600 FAGOR 2-axis height display. Machine Type: Jig Grinding Machine Control Type: Conventional X-axis travel: 400 mm Y-axis travel: 250 mm Dodpfx Afsktkmvsnokh Workpiece height: 500 mm Grinding diameter: 220 mm Table top: 600 x 320mm Neckline: 310mm Angle Range: 12° Grinding carriage adjustment - vertical: 110 mm Lifting speeds: 0 - 6 m/min. Grinding spindle speed: max. 50,000rpm Peripheral speed: max. 35m/sec Maximum weight of the piece on the table: 80 kg.

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Dodjt Hwziepfx Afnskh Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: ready for operation (used), Jig grinding machine HAUSER 5 SM Table length: 750 mm Table width: 620 mm Longitudinal travel (X-axis): 700 mm Transversal travel (Y-axis): 500 mm Vertical travel (Z-axis): 150 mm 2 columns execution Travel of the vertical slide: 500 mm Passage from grinding motor to table: 500 mm Max grinding diameter with display-plate: 300 mm Passage between the columns: 840 mm Max angle with taper grinding: up to 16 degrees Vertical travel of grinding spindle, stepless: -From 3 mm -Up to 145 mm Travel speeds, stepless: up to 2.8 m/min Radial fine feed of U-axis: up to 4.5 mm Planetary motion speeds of C-axis, stepless: -From 10 rpm -Up to 280 rpm Total power required: 6.3 kW Aprox weigth 5.000 kg Jig grinding machine HAUSER 3 SMO Table length: 595 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm 1 column execution Travel of the vertical slide: 500 mm Passage from grinding motor to table: 490 mm Distance from spindle-center to vertical slide: 310 mm Max. grinding diameter: 220 mm -With display-plate: 280 mm Max. angle with taper grinding: -Up to: 12° Vertical travel of grinding spindle (stepless): -From: 1 mm -Up to: 110 mm Dkodjuyuunjpfx Afneh Travel speeds (stepless): -Up to: 6 m/min Planetary motion speeds (stepless): c axis -Up to: 330 rpm Spindle motor: 7.50 kw weight: about 2000 kg

Condition: used, machine/vehicle number: 208 597, x-travel:400 mm y-travel:250 mm workpiece height:500 mm grinding diameter:220 mm table surface area:600 x 320 mm throat:310 mm range of angles:12 ° grinding wheel stroke - vertical:110 mm stroke speeds:0 - 6 m/min grinding spindle speed:max 50.000 U/min peripheral speed:max 35 m/sec workpiece weight:80 kg weight of the machine ca.:2 t Dodpfx Aocxxuwjfnekh dimensions of the machine ca.:1,2 x 1,3 x 2,3 m

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, center height: 175 mm, type of input current: three-phase, spindle speed (max.): 1,500 rpm, spindle speed (min.): 1 rpm, feed length X-axis: 285 mm, feed length Z-axis: 800 mm, overall weight: 4,000 kg, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, input voltage: 400 V, CNC Cylindrical grinder STUDER S33 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: FANUC 21i-TB Software installed: StuderGrind Centre distance: 650 [mm] Height of centers: 175 Stroke X axis: 285 [mm] Min. Stroke speed X axis: 0.001 [mm/min] Max. Stroke speed X axis: 5000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Z axis: 800 [mm] Min. Stroke speed Z axis: 0.001 [mm/min] Max. Stroke speed Z axis: 10000 [mm/min] Resolution Z axis: 0.0001 [mm] B axis swivelling stroke: -15 [°] / +195 [°] B axis indexing precision: Hirth 1 [°] Workpiece spindle nose: MT5 Workpiece spindle min. speed: 1 [rpm] Workpiece spindle max. speed: 1500 [rpm] Max. part weight in part holder headstock between centres: 80 [Kg] Type of attachment tailstock: MT3 Tailstock quill stroke: 35 [mm] Tailstock quill diameter: 50 [mm] Tailstock fine adjustment: +/- 40 [mm] Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 4000 [Kg] INCLUDED EQUIPMENT: x1 internal grinding spindle type 102560B – speed: 60,000 [rpm] x1 hydraulic swiveling dressing attachment x1 fixed dressing unit mounted on the table x1 rotating wheel dressing unit (electrical) x1 3-jaw chuck Ø170 [mm] - MT5 x1 4-jaw chuck Ø170 [mm] - MT5 x1 magnetic chuck Ø170 [mm] - MT5 x1 2-point steady rest x1 pneumatic tailstock lift x1 pneumatic upper-table lift x1 longitudinal slide with rotary table - swiveling up to 8.5 [°] x1 automatic B-axis turret wheelhead – Hirth gearing 1 [°] x1 C-axis for thread and form grinding x1 workpiece probe MOVOMATIC C25 x1 contact control device DITTEL SENSITRON 6 x1 semi-automatic wheel balancing device MPM type BMT100M x1 paper filtration unit ARO TECHNOLOGIES type 5491.246A01 x1 mist extraction unit AIR-FRESH SERVICE type FMN-V12 Dksdsxywhpspfx Afnoh x1 foot pedal x1 electrical cabinet air conditioner x4 external grinding wheel flanges x1 set of lifting equipment x1 axis bracket (for transportation of the machine) x1 set of operating manuals (French, English, and German) More information upon request.

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your is: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung: -WSS mit Konus MK5, optional mit Adapter MK5/Kurzkegel Dkjdouwv H Topfx Afneh -RST mit MK4 Konus. Optional mit Feinverstellung -Schleifspindelstock T1/T2/T3 -T1 Schleifscheibendurchmesser 400mm -T2 Schleifscheibendurchmesser 300mm -T3 Innenschleifeinrichtung riemengetrieben. -Schleifspindelmotor 4,4kW -B-Achse hochauflösend -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs -GAP Control (Sensor am Schleifspindelstock) Optionen gegen Aufpreis: -HF Innenschleifspindel -Hochgenauer, höchst kippsteifer Werkstückspindelstock -Messteuerung Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring system Digital 2-axis display included. Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. TECHNICAL SPECIFICATIONS Dodpjxt Ilfsfx Afnskh Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.

Condition: used, Year of construction: 2003, NAKAMURA TOME SUPER NTJ CNC LATHE MAKE NAKAMURA TOME, MADE IN JAPAN MODEL SUPER NTJ YEAR 2003 CONTROL FANUC 18 iT B CHUCK SIZE 210.0 mm MAX TURNING DIA. 200.0 mm BETWEEN CENTRES 780.0 mm DRAW TUBE DIA. 80.0 mm TRAVELS: X AXIS: 750.0 mm Z AXIS: 130.0 mm TURRET 2 x 12 STATIONS SPINDLE SPEED Up to 5,000 rpm SPINDLE BORE 65.00 mm SPINDLE NOSE A2-6 PLUS Dksdpfev I Tx Rox Afneh CNC SHORT MAGAZINE BARFEED TURRET TOOLING SWARF CONVEYOR MANUALS

Year of construction: 1999, condition: excellent (used), Control: CNC-controlled and manually controlled PC P 2000 MMX-PCI Desktop ATX color screen 15", keyboard CNC-Turbo roughness for WINDOWS TECHNICAL DATA Hard stone test plate (DIN 876) Dedpelxyp Hefx Afnekh length x width 1200 x 500 mm Accuracy grade 2 Flatness 16,6 µm Weight 250 kg Linear feeder Waveline 60 Basic Probe length 60 mm Resolution 0.014 µm Measuring column Wavelift 400 CNC Travel 400 mm Positioning repeatability ˂ 10 µm Device dimension W x D x H 1.8 x 0.8 x 2.2 m Weight 600 kg EQUIPMENT/ACCESSORIES  Complete enclosure with electrically operated roller blinds  hard stone plate 1200 x 500 mm  ISEL-feed axis with ball screw drive  Workpiece mounting plate  Linear feed unit Waveline 20/60  Measuring column Wawelift 400 CNC  Tilting unit KEG 60 at the measuring column, manual to the Waveline  Installation kit for roughness measurement  Installation kit for contour measurement  Various probes and holders for roughness and contour measurements  Instrument table  Emergency stop button on the instrument table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for mounting the hard stone plate  Documentation

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Dkodpfx Aod Amgksfnjh Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports