Plate rolling machines Haeusler VRM HY L2500x10mm 2005

Haeusler VRM HY L2500x10mm

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Chedpfxexg Rhve Acrod

Condition: good (used), Year of construction: 1991, pressure 300 t chamfer lenght 4100 mm distance between columns 3710 mm stroke - stepless adjustable 250 mm column arm 330 mm dayligth 500 mm table height 940 mm table width 250 mm working feed 7.0 mm/sec return speed 90.0 mm/sec Control konv. operating pressure max. 305 bar voltage 380 V total power requirement 22.5 kW weight 25200 kg range L-W-H 4320 x 2100 x 3370 mm Codpfx Acoxab I Torehd well-maintained condition (!!) - in checked condition - machine video - ?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) * adjustment via front control panel (button) * with analog position display * fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) * with analog position display - 1x split set of 85° deer foot upper tool - 1x MultiV - universal die block, with several V-openings - 2x front, stable support arms - 1x freely movable double foot switch - 1x freely movable 2-hand control - side safety device (swivelling doors) - rear safety device (sliding door) - original operating instructions

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. Codpfx Aezi Duhjcrohd KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, coil weight: 15,000 kg, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness copper (max.): 4 mm, inner diameter: 508 mm, sheet thickness (max.): 4 mm, outer diameter: 1,800 mm, coil width: 1,600 mm, number of blades: 4, type of input current: three-phase, warranty duration: 12 months, straightening roller diameter: 75 mm, load capacity: 15,000 kg, space requirement width: 3,500 mm, space requirement length: 12,000 mm, space requirement height: 3,500 mm, feed roller diameter: 250 mm, number of feed rollers: 2, CTL Demaq Evo. New, stock. Coil up to 15 Tons D1800, 20-24" Nominal. Coil Cart hydraulic. 2 pinch-role of feeder and 11 straight rolls. Hardened and chromed. Servo Nidec in straightener and decoiler. 4 longitudinal knifes, axis (HC) 230 mm, knifes 300 mm. Transversal shear. Full made in Spain in our facilities. Chedpfx Aou Ey D Sscrod Optional other devices and configurations. The most advanced Demaq SPL machine. 2 units available.

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200 Chodpfx Aera Rrhjcrsd

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Cjdpfxezguums Acrjhd Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 2026, Slitting line 1500 x 6, made by GUIDA Line composition: - Loading coil car - Uncoiler with sliding base and single expanding mandrel - Pressure arm - Feeding telescopic table with cutting edge and deflecting roll - Entry pinch roll - Crop shear - Tilting table - Mechanical centering device - Calming rolls - Slitting shear - Looping pit equipment (entry and exit saddles + connecting tables) - Felt press - Deflecting rolls - Titling table - Recoiler with single expanding mandrel - Separator arm - Electric equipment - Hydraulic equipment - Safety fences protection - Several tooling and accessories Chjdpfx Acsymciaorsd - Spare parts Material to be processed: Hot rolled carbon steel Material tensile strength: 400 N/mm² Coil width max.: 1.500 mm Thickness: 1 - 8 mm Coil weight: 20 Tn Coil inside diameter entry: 500/600 601 + steel spacers for bigger diameter Coil external diameter Entry/Exit: 1.700 mm Slitting shear mandrels diam.: 220 mm Blades diameter: 355 mm Line speed: 50/25 m/min with manual speed change gear Working Direction: From left to right Power supply tension: 380/50 Hz

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm Cedpfx Acju Icmhjrshd -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Csdpfx Acepbvqvorehd Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: good (used), Year of construction: 1980, Donewell press brake Type: 80-2500 Control: Cybelec CP 9220 Pressing force: 80 T Working width: 2540 mm Year of construction: 1980 Dimensions: 255x130x265 cm LxWxH Csdsqgcqispfx Acrohd Weight: approx 6300 KG