Jointing line

GRECON

Condition: used, Year of construction: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of construction: 2001 Commission no.: 0682-10 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Condition: used Fsdpfx Afewtgcxsnepc

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Fedpfx Asw Sy T Hofnepc Storage location: Nattheim

Condition: used, Year of construction: 2004, Infeed length: 150–700 mm Final length: max. 6,100 mm Fjdpfx Asw Nbacjfnjpc Moulder: 2 packages/min Press: 2 cycles/min Compact semi-automatic finger jointing line consisting of: - Moulder PJ 150/500 - Transfer table for manual handling - Single-channel press PJ 7/6100 li

Year of construction: 1997, condition: ready for operation (used), Workpiece dimensions: 150-1000x50-205x35-50mm, end length: 3000-6000mm, connected load: 80kW, length: 15,480mm, width: 5500mm, height: 2000mm, weight: 10.5t, including documentation. Fjdpeign Efofx Afnspc

Condition: excellent (used), Weinig four-sided planer max planing width 230mm Fpederigxyopfx Afnsc max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Grecon Ultra microstrip line - German production - year of production 2001 - for soft and hard wood - DTR TECHNICAL PARAMETERS: length of elements min/max 150/1000 mm width of elements min/max 40/205 mm height min/max 20x80 ratio min length / max width 2:1 initial length min/max 3000/6100 mm power of disc engine 5,5 kW blade spindle diameter 30 mm milling cutter motor power 22 kW spindle diameter 50 mm total length 11500 mm width 5300 mm total power consumption 39 kW air pressure 8 bar air consumption 660 NL/min nozzle diameter 250 and 100 mm extraction demand 6150 m3/h 30m/s Fedperf Ty Ssfx Afnspc transport dimensions 1300 cm x 220 cm x 200 cm weight 6700 kg

Condition: used, Year of construction: 2018, functionality: fully functional, WEINIG GRECON HS 120 FINGER JOINTING LINE – MICROJOINTING LINE Year of manufacture: 2018 LP 3 – internal reference number Line price: EUR 499,000 net For sale: a complete, fully automated finger jointing line for wooden elements, based on the WEINIG GRECON HS 120 finger jointer. The line is intended for industrial production of length-glued elements. An ideal solution for facilities manufacturing lamellas and battens, requiring high efficiency, repeatability, and consistent joint quality. The entire process is automated and designed for continuous operation with minimal operator involvement. — Line Composition and Equipment WEINIG GRECON HS 120 Finger Jointer – year of manufacture: 2018 Complete working line including a brush feeder for wooden elements, two throughfeed moulders, automatic glue applicator, pre-pressing station for finger-jointed elements, and a press with a pressing length of 6.5 m. Automatic finger jointer feeding – ABB robotic workstation ABB IRB 6640 four-axis robot providing automatic feeding of wooden elements up to 600 mm in length. The system is equipped with two pallet cells, allowing uninterrupted, alternating operation of the entire line with no downtime. Robot station year of construction: 2021. Automatic glue supply system Automatic glue suction from a 1000-litre IBC tank to the finger jointer. Integrated automatic agitator ensures consistent glue quality and process continuity. Post-pressing element collection – FAMAD scissor lift FAMAD DBNA-40T DUO scissor lift installed at the finger jointer press, intended for collecting battens after the jointing process. Automatic height adjustment. Working table dimensions: 6.0 m x 1.3 m. Material transport system Roller conveyor system with turntables, ensuring transport of strips to the robot loading cell and finger jointer. This solution guarantees smooth material flow and continuous operation of the entire line. Roller storage for finger-jointed elements Roller buffer storage for batten storage after finger jointing. Storage positions with a total length of 82 m. — Key Line Advantages • Complete, industrial-scale production line ready for operation • Fully automated feeding, transport, and glue application • Stable and repeatable jointing process parameters • 6.5 m press enabling efficient lengthwise jointing of elements • Extensive 82 m roller storage increases productivity and work comfort • Ideal for the production of glued components, battens, lamellas, and wooden parts — Sales Conditions The machine is offered exclusively as a complete line Fsdpeyhm R Rsfx Afnepc Price: EUR 499,000 net If you are interested, please contact us by phone for more information, technical documentation, and to arrange a viewing date. The offered equipment/machine is sold under EXW (PL – 38-120 Czudec) terms according to Incoterms 2020.

Condition: used, Year of construction: 2004, SECOND-HAND FINGER JOINTING LINE WEINIG GRECON PROFI JOINT MOD. PJ 150/500 - CE Fedpfswry I Ejx Afnepc - Wood entry length 150 - 700 - Wood width 40 - 150 mm - Wood thickness 18 - 80 mm - Wood exit length 3,000 - 6,100 - Press length 6100mm - Press force 105 kN - Milling unit motor 15Kw - Scoring unit 5.5Kw - Year 2004 CE

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Finger jointing line Grecon ProfiJoint Year of production: 2014 Technical condition: very good Technical data: Finished element length: 2100 mm For an additional fee, installation, start-up, and operator training are available. We also offer ongoing service. Fpodpfxexyq Nmj Afnoc

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, The Grecon Combipact wood joining line, year of manufacture 2009, is an advanced system used in the woodworking industry, primarily for joining short lengths of wood into longer pieces using finger jointing. Thanks to this process, it is possible to use wood waste to produce full-value structural elements, such as in beams, scantlings and panels. Technical data: 1. initial length of the elements: - Minimum length: 150 mm - Maximum length: 1000 mm 2 Width of elements: - Minimum width: about 20-40 mm. - Maximum width: about 200 mm. 3. thickness of elements: - Minimum thickness: about 15-20 mm. - Maximum thickness: about 80 mm. 4. Final length after jointing: - Standard maximum length after jointing: from 6000 mm. 5 Capacity: - The production capacity is usually 5 to 15 joints per minute, which gives the ability to process up to 3000 mb/hour. 6. joint type: - Finger jointing, which is made with high precision, providing a durable and strong connection. 7. Press pressure: - Typically, a hydraulic press applies a pressure of several to several tons to effectively join the parts. 8 Control: - A PLC control system that provides process automation with the ability to set various parameters for joining wood. Fpjdpfx Afouiz I Renjc 9 Gluing: - Grecon Combipact lines are equipped with automated glue application systems that precisely dispense the correct amount of bonding agent. 10. power supply: - Standard power supply: 400 V, 50 Hz

Condition: excellent (used), Weinig Unimat 23 EL four-sided planer Working width 230mm Fpjdpfx Ajrb An Uofnec Working height 160mm Head arrangement: Bottom 5.5kw Right 4kw Left 5.5kw Right 4kw Top 11kw Bottom 5.5kw Top 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Rollers driven in table Pneumatic pressure pads CE certificate Year of production 2003

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Wood finger-jointing line Weinig Grecon ProfiJoint Year of manufacture: 2009 Technical condition: very good Technical data: Working width: 40–150 mm Working height: 18–50 mm Working length: 6100 mm Milling unit: Infeed material length: 150–700 mm Fsdpfxsyf N Sls Afnopc Material width: 40–150 mm Material thickness: 18–50 mm Jointing options: horizontal and vertical joints Milling spindle power: 18 kW Scoring cutters Hydraulic end press Grecon PJ7/6100: Maximum finished element length: 6100 mm Saw blade diameter: 350 mm Cutting unit power: 2.2 kW The machine underwent a complete overhaul and modifications in 2022 and operates in automatic mode. Only one operator is required for operation. Installation, commissioning and operator training available at an additional cost.

Condition: excellent (used), operating hours: 10 h, functionality: fully functional, Grecon Dimter Ultra automatic wood joining line Machine after major renovation. Specification: Tenner: Sawheadstock: - Spindle speed: 3000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling headstock: - Shank diameter: Ø50 mm - Usable shank length: 210 mm - Max. tool diameter: Ø250 mm-Ø150 mm - Spindle speed: 6000 rpm - Milling motor: 15 kW / 3000 rpm - Chip extraction: Ø150 mm Feed table: - Minimum board length: 150 mm - Maximum board length: 700 mm - Working feed: Steplessly adjustable Dust extraction: Chipper exhaust port diameter: Ø100 mm Mill exhaust nozzle diameter: Ø150 mm Dust extraction capacity (flow rate): ~2400 m3/h Pneumatic system: Working pressure: 6 bar Air requirement: ~2.5 m3/h at 6 bar (15 Nm3/h) CONTI M 6/6000 longitudinal wood joining press: Press: - Loaded strip width: 25 – 160 mm - Finished strip length: approx. 6000+15-50 mm - Pressing force: 3 – 7.5 T (3 000 – 7500 daN) Circular saw: - Saw diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3000 rpm Dust extraction: - Saw exhaust nozzle diameter: Ø100 mm - Dust extraction efficiency (flow rate): ~400 m3/h Pneumatic installation: - Working pressure: 6 bar - Air demand: ~2.5 m3/h at 6 bar (15 Nm3/h) Scope of renovation work: 1. Cleaning the machine bodies and applying new paint 2. Replacing with new bearings on: the main spindle of the tenoner; on the saw headstock of the press; linear bearings on the guide of the tenoner table carriage; bearings on the working belts. 3. Installing a new glue nozzle with a pitch of 3.8 mm on the tenoner body, installing a glue supply tank with a safety valve; 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic hoses for actuators, solenoid valves and other pneumatic elements in machines with new ones; 7. Replacement of gear wheels and double-row chain on the belt-chain feeder of the press. 8. Regeneration of electromagnetic brakes on the tenoning machine 9. Replacement of seals and O-rings (repair kits) in pneumatic actuators Replacement of worn solenoid valves with new ones. 10. Replacement of graphic panels on the tenoning machine cabinet, on the press cabinet, on the small press panel with new ones. 11. Replacement of buttons, lamps and switches on panels and control boxes with new ones. Replacement of boxes with connectors with new ones. Fedpouddvaefx Afnepc 12. Replacement of controllers supervising the operation of the tenoning machine and press with new ones. Adjustment of the machine control program to the user's needs 13. Installation of a new inverter on the press rollers and on the pusher of the receiving table projector; 14. Maintenance of electrical installations in control cabinets, modernization and preparation of electrical diagrams. 15. Installation of covers, grids and necessary descriptions, stickers and health and safety signs as well as manufacturer's logos and nameplates. 16. Replacement of V-belts with new ones, checking pulleys; gear motors and engines; 17. Replacement of limit switches, inductive and optical sensors (photocells) with new ones. We specialize in wood joining machines. Installation, start-up and training of employees in the scope of machine operation in Poland included in the price, in other countries for an additional fee. We provide service and access to spare parts.

Year of construction: 2002, condition: reconditioned (used), Fully automatic finger jointing line: Type Doppel-Pack with automatic feeding With multiple crosscut saw Fpedpfsg D Ugkjx Afnjc With automatic stacking machine Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm wood cross-section: min. 20 x 40 mm max. 80 x 180 Wood exit length: 6030 mm max. Wood cross section with 10 mm tine size: Hardwood 120 cm² softwood 150 cm² Tine design vertical and horizontal Glue type. PVAC white glue, 2-sided glue application Electric power: Supply voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tine length / possibly wood cross-section and glue type can still be adapted. Capacity: 6 milling tables/ min working height: 960mm table width: 600 mm glue application: double-sided application Technical parameters: Input material: Input length of parts (min. - max.): 150-1000mm Part width (min. - max.): 40-155 Part thickness (min. - max.): 20-80mm Working height : 960mm Bundle width: 600mm Glue application: double-sided application (on both sides of the

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Wood finger-jointing line Weinig Grecon ProfiJoint Year of manufacture: 2013 Technical condition: very good Technical data: Working width: 40–150 mm Working height: 18–50 mm Working length: 6100 mm Milling unit: Infeed material length: 150–700 mm Material width: 40–150 mm Material thickness: 18–50 mm Jointing options: horizontal and vertical joints Milling spindle power: 15 kW Hydraulic end press Grecon PJ7/6100: Maximum finished element length: 6100 mm Saw blade diameter: 350 mm Fpedoyf N Itjpfx Afnsc Cutting unit power: 2.2 kW Installation, commissioning and operator training available at an additional cost.