Wire EDM machine

GF AgieCharmilles Progress V3

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, controller model: AGIEVISION 5, The seller provides a 6-month warranty on all machine parts. TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 426 mm U/V-axis travel: ± 70 mm Machining performance Max. taper: 30° at 100 mm height Max. cutting rate: 500 mm²/min Achievable surface quality: Ra: 0.20 µm Available wire diameters: 0.15 – 0.33 mm Gsdpfxjwh Sgle Ag Rebg Workpiece data Max. workpiece dimensions: 1,050 x 650 x 420 mm Max. workpiece weight (in bath): 400 kg Max. workpiece weight (without bath): 800 kg Generator & Control System Generator: AGIE IPG-V Control System: AGIEVISION 5 MACHINE DETAILS Dimensions (L) x W x H): 1,940 x 2,300 x 2,600 mm Net weight: 3,460 kg EQUIPMENT - Water bath machine with automatic wire threading - Automatic rethreading after a wire break - AGIEJOGGER handheld unit for convenient setup

Condition: used, TECHNICAL DETAILS Gbjdpfx Aeup Hw Ejg Reg - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 48894 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: excellent (used), Year of construction: 2008, Control system: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Z travel: 1300 mm Gjdpfx Agevgxfyj Robg Pallet size: 800 x 1000 mm Table load: 2000 kg NC rotary table with direct drive Positioning: 0.001° Max. Max. speed of the rotary indexing table: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 KW (25%) / 28 KW (100%) Spindle torque: 1210 NM / 680 NM Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 places Max. Tool diameter: 325 mm Max. Tool length: 800 mm Max. Tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in the tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is supplied with many tools

Condition: used, TECHNICAL DETAILS - Number of axes : 3 - Centers height : 175 [mm] - Distance between centers : 1000 [mm] LINEAR AXES - Grinding length : 500 [mm] - Travels X x Z : 267 X 650 [mm] GRINDING WHEEL HOLDER HEADSTOCK - Continuous orientation : +/-8,5 [°] - External wheel dimensions : 500 x 80 x 203 [mm] - Grinding wheel holder headstock power : 7,5 [kW] - Cutting speed : 44 [m/s] PART HOLDER HEADSTOCK - Taper type : CM5 - Axis C : +/-0.5[°] - Power : 1 [kW] - Rotation speed : 30-1000 [Rpm] TAILSTOCK - Taper type : CM3 - Quill travel : 35 [mm] - Quill diameter : 50 [mm] - Max. part weight between centers : 130 [kg] ELECTRIC SUPPLY - Supply voltage : 400V 50 Hz - Machine dimensions : 2700 x 2350 x H. 2100 [mm] - Weight : 4 000 [kg] HOURS - Working hours : 17.775 [h] EQUIPMENT - CNC FANUC 16i-TA control - Pictogramming - Studer RELEASE C - Electronic handwheel - SENSITRON Gedpfx Aeuhbydeg Rebg - Dynamic balancing device : Hydrobalance HBA 40000-1 - Automatic length probe arm MOVOMATIC C25 - Automatic outer diameter probe arm in-process MOVOMATIC - Grinding wheel safety guard with automatic toppling - Fixed grinding device upon part-holder headstock - Coolant tank : 375 [l] - Paper filtering unit - Oil mist extractor - Wheel-holders flanges

Condition: good (used), Year of construction: 2020, machine/vehicle number: 164390-0000-Z2724, Offer 24059 Technical data: - Jaw design stepped jaws - Jaw width 125 mm - Jaw height 40 mm - Clamping width 1 0 - 216 mm - Clamping width 2 97 - 312 mm - Clamping force 40 kN - Total height 140 mm Gbsdpfxjrwmkaj Ag Rsg - Weight 33 kg - Min. Space requirement L 463 x W 126 x H 145 mm

Year of construction: 1999, condition: ready for operation (used), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, speed: 7000rpm, tool holder: SK50, power: 30kW, tool positions: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19700kg, control: Mazatrol 640M PC-Fusion-CNC. Including 2-fold pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection is possible. Gbsdjvnd Suepfx Ag Rjg

Condition: good (used), Year of construction: 2006, operating hours: 119,571 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Gedpoxcp Srofx Ag Rjbg Siemens 840D Machine ON: 119,571 h, Spindle ON: 56,792 h - Spindle HSK-A63 10,000 rpm - 32 tool stations - Rotary table SRT 280 mm with integrated clamping system HSK100 (if not needed, it can be covered or alternatively converted to a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool stations plus 87 additional stations ZM87 - Thermal compensation - BLUM tool measurement on the side - Renishaw probe - Chip container - Status light The machine has been thoroughly inspected and comes with a geometry report as well as circularity test measurements. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Gedpfsw Ucyusx Ag Rebg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: used, TECHNICAL DETAILS - distance between centers : 600 [mm] - center's height : 175 [mm] - table orientation : 11 [°] UNIVERSAL GRINDING WHEEL HOLDER HEADSTOCK - left grinding wheel dimension : 400 x 50 x 127 [mm] - right grinding wheel dimension : 225 x 20 x 76,2 [mm] - motor power : 3 [kW] - spindle speed : 1500 / 1700 / 2200 - grinding-wheel holder headstock orientation : 270 [°] PART HOLDER HEADSTOCK - part-holder headstock orientation : 360 [°] - spindle speeds : 20 - 400 [Rpm] - internal taper : Morse 5 - motor power : 0,9 [kW] TAIL STOCK - internal taper : CM4 - quill stroke : 30 [mm] DIMENSIONS - floor surface : 2580 x 1680 [mm] - height : 1670 [mm] - weight : 2200 [kg] EQUIPMENT - FISCHER internal spindle: 14,000 [rpm] Gbsdpfouhbywjx Ag Reg

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Gbjdpfxowywcio Ag Rog Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!