Genie GS4069 DC electric scissor lift with outriggers

Genie GS-4069 DC

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 363 kg, empty load weight: 5,415 kg, construction height: 2,740 mm, fuel type: electric, total length: 3,760 mm, drive type: Elektro, construction width: 1,750 mm, working height: 14,120 mm, Scissor lift Technical condition: New Front tire type: Pneumatic Codpfozrcdgox Agkjha Rear tire type: Pneumatic Battery voltage: 48V Battery capacity: 315Ah Battery year of manufacture: 2019

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet Chodpfx Agju Rni Hskoa *

Condition: good (used), Year of construction: 2013, operating hours: 170 h, machine/vehicle number: 189132, load capacity: 363 kg, overall weight: 5,417 kg, construction height: 2,670 mm, product width (max.): 1,760 mm, working height: 14,000 mm, enginetype: Electric, manufacturer: Genie Chsdpozcbhasfx Agkja

Condition: good (used), Year of construction: 2013, operating hours: 400 h, machine/vehicle number: 189131, load capacity: 363 kg, overall weight: 5,417 kg, construction height: 2,670 mm, product width (max.): 1,760 mm, working height: 14,000 mm, enginetype: Electric, manufacturer: Genie Cjdpfx Ajzcbg Nsgkjha

Condition: used, functionality: fully functional, fuel type: diesel, empty load weight: 18,000 kg, lifting height: 25,000 mm, Year of construction: 2023, operating hours: 1,336 h, total length: 8,830 mm, construction height: 3,150 mm, drive type: Diesel, load capacity: 6,000 kg, construction width: 2,530 mm, Rotating telescopic handler Speed class: 40 Csdpfeumvfyjx Agkoha Technical condition: very good Description: The Magni RTH 6.25 is a versatile rotating telescopic handler for assembly, lifting, and material handling on construction sites and in industrial applications. With a lifting height of up to 25 m, a lifting capacity of 6,000 kg, a large reach, and a rotating upper carriage, this machine is ideally suited for working at height and in confined spaces. Robust, powerful, and easy to operate. High off-road capability for a wide range of applications. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this machine, we offer other aerial work platforms and telescopic handlers for rent and sale. Our machines are continuously serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease-purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, Year of construction: 2015, fuel type: electric, Lifting capacity: 363 kg Please contact Gebrauchtgeräte Center for more information Chedpfezfkwzsx Agkoa

Condition: excellent (used), Year of construction: 2014, operating hours: 488 h, fuel type: electric, Year of manufacture: 2014 Drive: Wheel GVW: 5.424 kg Dimensions (LxBxH): 376 x 175 x 274 cm Lifting capacity: 363 kg Working height: 1.402 cm Technical condition: very good Visual appearance: very good Please contact Ton for more information Manufacturer: Genie Type: 4069DC Year of manufacturing: 2014 Weight: 5.424 KG Hourmeter: 488 Cedpfey S Untsx Agkjha Drive: Electric, 4x2 Product number: 25107 Platform height: 12,02 m Working height: 14,02 m Platform measurements: 279x160 cm Extendable platform:91 cm Total measurements LxWxH: 376x175x274 cm Max. platform load: 363 KG Machine is technically in good condition. Documents incl. CE. Price: € 11.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto; Chjdpfxsp Stgnj Agkja

Condition: used, Year of construction: 2020, total length: 3,920 mm, - Arbeitshöhe max. 14,30m - Plattformhöhe max. 12,30m - Plattformhöhe – eingefahren 1,65m - Plattformlänge – außen 2,79m - Plattformlänge – außen, ausgeschoben 4,32m - Plattformausschub – Länge 1,52m - Plattformbreite – außen 1,60m - Höhe der Fußleiste 15 cm - Max. Personen auf der Plattform (innen/außen) 3/2 - Tragfähigkeit 363 kg - Tragfähigkeit – mit ausgefahrenem Plattformausschub 136 kg - Verfahrbar in voller Plattformhöhe 12,3m - Fahrgeschwindigkeit – eingefahren 7,2 km/h - Fahrgeschwindigkeit – ausgefahren 0,5 km/h - Steigfähigkeit – eingefahren 35% - Wenderadius – innen/außen 2,11m/ 4,6m Chjdpfjxpx Uvex Agkja - Hub-/Senkzeit 61/43 sec - Neigungs-Sensoraktivierung (Längsachse/Querachse) 3° / 2° - Nivellierung mit max. Abstützungen Längsachse/Querachse) 5,3° / 11,7° - Reifenkontaktdruck 641 kPa - Bodenlast 10,56 kPa - Schall- & Vibrationspegel - Geräusch-/Schalldruckpegel (Boden) < 70 dBA - Geräusch-/Schalldruckpegel (Plattform) < 70 dBA - Vibration < 2,5m/s²

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Cjdpjxabc Rofx Agksha Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks