Surface grinding machine

Geibel & Hotz FS840 SD

Year of construction: 2020, operating hours: 6,056 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Nodpfx Apox D Iv Ejrowk General Data Measurements width 3150 Measurements depth 5564 mm Measurements height 2135 mm Machine weight 10000 kg Main Drive Spindle speed range 3600 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 22.5 m/min Z-Axis Rapid Traverse 33 m/min Workpiece Workpiece drm over bed 800 mm Workpiece drm 600 mm Tools Slots in storage 12 This 3-axis horizontal turning machine manufactured in 2020 features a Siemens 840D control and a spindle speed up to 3,600 rpm. It offers a max turning diameter of 600 mm and a length of 2000 mm. Equipped with a chip conveyor, Siemens CELOS control system, and a fume extraction system, it's ideal for complex machining tasks. Consider the opportunity to buy this DMG MORI CTX 2000 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Nwsdpfx Aeul Svloprsk Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: ready for operation (used), Year of construction: 2015, A vertical high-performance milling and thread machining center DMG Mori is available. Travel X/Y/Z: 700mm/420mm/380mm, max. workpiece dimensions X/Y: 880mm/550mm, table dimensions X/Y: 840mm/420mm, max. table load: 400kg, spindle speed: 10000rpm, spindle power: 25kW, torque: 45Nm, tool positions: 15, tool holder: BT30, rapid traverse: 60m/min, feed force: 5kN. Machine dimensions X/Y/Z: approx. 1650mm/2350mm/2500mm, weight: approx. 4000kg, control: Siemens Sinumerik 840D Solutionline, machine hours: 28892h, spindle hours: 12674h. Documentation available. An on-site inspection is possible. Nodpfjynlu Uex Aprswk

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information about this machine. • 2 x 16 fold Sauter star VID 30 • Siemens 840 D • Excentric turning and milling operation • TC alternating speed • Counter spindle • Glass scales Y1, Z1, Z2, Z3, X1, X2, X3 Additional equipment • 980 liter coolant with 8 bar/20 L and 20 bar/40 L programmed by M function • Pater band filter Njdpsx D Nd Defx Aprswk • Chuck rinsing device for main outside • Chuck rinsing device for counter outside • Coolant spray gun • Hinge type conveyor • Bar machine package • Window cleaning with compressed air • SK package for alu machining • Tool breakage Artis CTM

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, OKAMOTO ACC-16*24SA1 Precision Surface Grinding Machine Okamoto Precision Surface Grinding Machine ----- Model ACC-16•24SA1 Automatic Wheelhead Approach, Retraction to Start Position, Automatic Dress Cycle with Wheel Wear Compensation, Shift Plunge Cycle--- ----- Grinding Capacity 16”x 24” Standard Accessories Nwsdpfxozmhknj Aprsk • Automatic Overhead Wheel Dresser • Touch Screen Controller with 10” Display With Compensation, including Diamond Tool • Vertical & Crossfeed Pulse Generator • Rapid Wheel head Retraction • Teach-Input Positioning • Load Meter for Grinding Wheel Motor • 5 HP Wheel Spindle Motor • Shift-Plunge Rough Grinding Cycle • Stainless Steel Wheel Guard • Selectable Rough/Fine Infeed Grinding Method • Leveling Bolts with Plates • Table Park for Safety • Necessary Tools & Tool Box • Stainless Steel Splash Guard • Installation and Training • Instruction Manual

Condition: used, Year of construction: 2009, machine/vehicle number: V445C3-00236, Zoller Venturion 450 Precise measurement regardless of operator High degree of automation with CNC axes, autofocus, and rotary encoder Power-operated and universal tool clamping High-precision “ace” spindle clamps tools at the push of a button ZOLLER image processing “pilot 4.0” and large 24" monitor Industrial high-resolution camera Next to the CNC machine, in the workshop, in manufacturing cells User-friendly Nwodpfey D D T Asx Aprsk

Condition: used, Year of construction: 2017, functionality: fully functional, bending force (max.): 36 t, TRUBEND CELL 7000 High-End Aut. bending cell Year of construction: 05/2017 ADDITIONAL Functions: ToolMaster Bend (incl. Tool Identification System - TIS) Tool gripper for faster tool change (only in conjunction with ToolMaster Bend and gripper changing module) Conveyor belt Additional system pallet Additional mechanical gripper (without jaws) Additional jaws for mechanical finger gripper Nedpfsyalx Rex Aprewk Gripper changing module incl. tool cleaning station Multi-suction device with flat suction cups and electromagnets TCB - Thickness Controlled Bending STANDARD configuration: TruBend 7036 Cell Edition - Stable Machine frame - Electro-mechanical direct drive (torque motor) - 6-axis backgauge system with stop sensor - Segmented Wila tool clamps without Tool Identification System - TIS ATTENTION: lower tool clamp in the same design as the upper tool clamp - Switch cabinet air-conditioning BendMaster (15) - Stable frame and manipulator - Bearing load: 15 kg, max. sheet load: 3 kg - Floor tracks: Welded construction with stable guide rail. Travel 3215 mm - Gripper coupling at BendMaster - Electrical drives - Mechanical finger gripper with jaws LoadMaster Bend - Handling system - Multi-suction device with bellows suction cups - Double sheet detection and separation - Transfer station - System pallet Safety - Safety cell with swing sliding doors: The complete working and danger zone is safeguarded by a safety cell Lighting Control system - PC control with 19“ Touch screen - Mobile operating terminal - Network connection - Teleservice via Internet

Condition: like new (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, Machine type: CNC turning and milling center Manufacturer: DMG MORI Type: NLX2500SY/700 with Fanuc industrial robot, type R2000ic/165F Year of manufacture: 2018 Control system: M730 UM Mapps CELOS Country of origin: Japan Delivery time: upon agreement Incoterms: EXW Additional information: CNC turning and milling center DMG MORI NLX2500SY/700 Turning diameter max. 356 mm Turning length 705 mm Control system: M730 UM Mapps CELOS Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 4,000 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore 80 (91) mm C-axis: 0.001° Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle bore 43 mm C-axis: 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Rapid traverse rate (X / Y / Z): 30 / 10 / 30 m/min Number of tool positions: 12 Shank height for square tools: 25 mm Shank diameter of drills: 50 mm Tool change time: 0.27 sec. Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 4.2 kW Total power consumption: 41 kVA Machine weight: approx. 6.4 t - Counter spindle - Tool drive - C, Y-axis Nodpfxezcpkio Aprewk Subject to errors in technical data. The scope of the accessories is exclusive and limited to the description in the text. No claims can be made regarding additional accessories shown, e.g. for illustrative purposes.

Condition: like new (used), Year of construction: 2022, operating hours: 521 h, functionality: fully functional, machine/vehicle number: L3M0474, turning length: 500 mm, turning diameter: 300 mm, total height: 2,210 mm, total length: 3,950 mm, total width: 2,260 mm, overall weight: 5,680 kg, Equipment: documentation/manual, used Okuma lathe As-new, well-maintained condition 521 operating hours Nwedpfey Rx Tdjx Aprsk 347 spindle hours

Condition: used, Year of construction: 2011, Maximum grinding length: 1200 mm Maximum grinding length with table dresser: 1000 mm Maximum grinding width: 600 mm Grinding height (table to underside of grinding wheel): 550 mm Table load with magnetic chuck: 975 kg Table load without magnetic chuck: 1200 kg Table speed: 1 - 40 m/min Grinding spindle Nodpfx Apoxhdz Eerswk Motor spindle: 11 kW Grinding wheel: 406 x 152.4 x 100 mm Speed: 1400 rpm Longitudinal axis (Z-axis) Rapid traverse: 5 m/min Adjustable feed: 1 - 50 mm Continuously variable feed: 0 - 2000 mm/min Smallest infeed: 0.001 mm Vertical axis (Y-axis) Rapid traverse: 1.5 m/min Smallest infeed: 0.001 mm Space requirements approx.: 4450 x 2935 x 2540 mm Total weight approx.: 6700 kg Equipment: - Electro-permanent magnetic chuck 1000 x 500 mm incl. electronic control module and potentiometer - Coolant cleaning system with paper filter and magnetic separator 350 l – delivery rate 100 l/min - Static frequency converter incl. automatic dressing compensation - Complete extraction system - Siemens control with electronic handwheel - Various accessories, 2 flanges and 5 grinding wheels